Home › 2017 › May

Monthly Archives: May 2017

How to Remove and Install a 2009-2013 Toyota Prius Left GPS Bluetooth DVD Car Radio

Posted on by — 2 Comments ↓ 4,142 views
2009-2013 Toyota Prius Left GPS Bluetooth DVD Car Radio after installation

There is no denying that with a new multifunctional car radio installed in your car, you will enjoy a lot of convenience and enjoyment in your car all the way. If are fed up with your factory radio due to its single functions, you can consider replacing it with a new multifunctional car radio. To install a new car radio, you can turn to a detailed installation guide for help. If you own a   , then you can carefully refer to the detailed 2009-2013 Toyota Prius Left car radio installation instruction.

2009-2013 Toyota Prius Left GPS Bluetooth DVD Car Radio after installation
2009-2013 Toyota Prius Left GPS Bluetooth DVD Car Radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009-2013 Toyota Prius Left car radio installation instruction

1. Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool.

Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool
Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool

2. Remove the dash panel below the radio. Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash.

Remove the dash panel below the radio. Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash
Remove the dash panel below the radio. Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash

3. Remove the vent panel to the right of the radio as you did the left panel. It is only connected with clips that can be pulled free with moderate force.

Remove the vent panel to the right of the radio as you did the left panel. It is only connected with clips that can be pulled free with moderate force
Remove the vent panel to the right of the radio as you did the left panel. It is only connected with clips that can be pulled free with moderate force

4. Disconnect the wiring.

Disconnect the wiring
Disconnect the wiring

5. Remove the radio by removing the four screws near the corners of the radio mounting bracket with a Phillips-head screwdriver.

Remove the radio by removing the four screws near the corners of the radio mounting bracket with a Phillips-head screwdriver
Remove the radio by removing the four screws near the corners of the radio mounting bracket with a Phillips-head screwdriver

6. Pull the radio toward you slowly.

Pull the radio toward you slowly
Pull the radio toward you slowly

7. Pull the radio from its dock and pull the wire groups from the back of the radio. Grab the groups by the white plastic wire binders, not the wires themselves.

Pull the radio from its dock and pull the wire groups from the back of the radio. Grab the groups by the white plastic wire binders, not the wires themselves
Pull the radio from its dock and pull the wire groups from the back of the radio. Grab the groups by the white plastic wire binders, not the wires themselves

8. Check all the accessories for the new Seicane car radio.

9. Connect the harnesses to the back of the new Seicane car radio.

10. Connect the Seicane car radio to your original car radio’s plugs.

11. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane radio into the dash.

13. Put everything into their original place.

 

Wish the above installation steps can be helpful for you. Whether you have doubts about your car radio or your car, you can seek help from your dealer, someone experienced or turn to a professional for help. Anyway, it is very essential for you to check the compatibility between your new car radio and your car firstly. If your new car radio is not compatible enough, you’d better quit it and purchase a new one. Here I would like to share an amazing 2009-2013 Toyota Prius Left car radio from Seicane to you. For more information, please click:

https://www.seicane.com/android-hd-touch-screen-radio-for-2009-2013-toyota-prius-left-with-dvd-player-gps-navigation-bluetooth-music-wifi-mirror-link-rearview-camera-aux-s128009e

This amazing car radio, upgraded to the pure stable Android 6.0 operation system and a powerful 8-core 1.5 GHz RK-PX5 A53 processor, is up-to-date enough to be the best replacement for your factory radio in your car.

You don’t have to worry about getting lost any longer with this car radio installed in your car. According to turn-by-turn directions and voice prompts provided by the high-accuracy worldwide real-time GPS navigation system, you will easily and quickly know your current locations and accurately navigate to your desired destinations.

Through the Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, you can make, receive, reject and mute Bluetooth hands-free calls as well as freely listen to your favorite music streaming from your phone music playlists with keeping your hands on the steering wheel and your eyes on the road ahead, which add a lot of convenience and joyfulness to your driving.

Wish you like this unit and good luck to you!

Useful Tips on a 2001-2008 Mercedes Benz G Class W463 G550 G500 G400 G320 G270 G55 GPS Bluetooth DVD Car Radio Upgrade

Posted on by — 2 Comments ↓ 5,183 views
2001-2008 Mercedes Benz G Class W463 G550 G500 G400 G320 G270 G55 GPS Bluetooth DVD Car Radio after installation

If you have some related installation experience, to install a new car radio in your car, you can find a detailed installation instruction to help you. If you don’t have any experience at all, it is suggested that you should ask a professional technician to help you install the new car radio. Here I’d like to share a step-by-step 2001-2008 Mercedes Benz G Class W463 G550 G500 G400 G320 G270 G55 car radio installation instruction from Seicane with you. Wish you can get some help from it.

2001-2008 Mercedes Benz G Class W463 G550 G500 G400 G320 G270 G55 GPS Bluetooth DVD Car Radio after installation
2001-2008 Mercedes Benz G Class W463 G550 G500 G400 G320 G270 G55 GPS Bluetooth DVD Car Radio after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2001-2008 Mercedes Benz G Class W463 G550 G500 G400 G320 G270 G55 car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Turn on key, DO NOT turn on engine, move shifter lever so you can move trim, make sure car is not moving.

Turn on key, DO NOT turn on engine, move shifter lever so you can move trim, make sure car is not moving
Turn on key, DO NOT turn on engine, move shifter lever so you can move trim, make sure car is not moving

3. Push and remove the extra assembly.

Push and remove the extra assembly
Push and remove the extra assembly
3-1
3-1

4. Carefully lift front of shifter trim, pull forward, then lift back of trim.

Carefully lift front of shifter trim, pull forward, then lift back of trim
Carefully lift front of shifter trim, pull forward, then lift back of trim

5. Remove two screws holding the panel.

Remove two screws holding the panel
Remove two screws holding the panel
5-1
5-1

6. Remove the panel.

Remove the panel
Remove the panel

7. Remove two screws that fixed the original radio on the dashboard.

Remove two screws that fixed the original radio on the dashboard
Remove two screws that fixed the original radio on the dashboard
7-1
7-1

8. Pull out the original car radio gently, then unplug the connectors at the back of the car radio.

Pull out the original car radio gently, then unplug the connectors at the back of the car radio
Pull out the original car radio gently, then unplug the connectors at the back of the car radio

9. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

10. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

11. Connect the Seicane car radio to your original radio’s plugs.

12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane car radio into the dash.

14. Put everything into their original place. All the installation is done.

 

Before installation, please confirm that you can understand every detailed step of the above installation guide. If you meet any difficulties and don’t know how to overcome them, you can seek help from your dealer, someone experienced or a professional. Or you can directly arrange a professional technician to help you install the new car radio. Anyway, first of all, it is very important for you to select an ideal car radio for your beloved car. Here I would like to share a remarkable 2001-2008 Mercedes Benz G Class W463 G550 G500 G400 G320 G270 G55 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-2001-2008-mercedes-benz-g-class-w463-g550-g500-g400-g320-g270-g55-dvd-gps-radio-stereo-with-hd-touch-screen-bluetooth-music-3g-wifi-backup-camera-mirror-link-obd2-s127501e

You are able to embrace a much smoother and faster operation experience than ever before since this car radio is running on the most stable Android 6.0 operation system, 8 – Core 1.5 GHz RK-PX5 A53 processor and 32GB INand flash as well as 2GB RAM.

The high-precision GPS module is specially built in this unit, so you are able to make full use of it to know your current locations and find the right way to reach your ideal destinations according to turn-by-turn directions and voice prompts. Additionally, while navigating, you can freely enjoy music under GPS mode and the music will automatically switch to GPS voice thanks to this unit’s dual zone function.

Moreover, you can utilize this unit’s function as a DVD player to play wonderful videos, TV programs and movies, etc to relax yourself, your families or your friends in your beloved car.

Wish you have an unforgettable driving experience accompanied by this car radio. Good luck to you!

The Ultimate Instruction on Removal and Installation of a 2006-2011 Ford Fusion GPS Bluetooth DVD Car Radio

Posted on by — No Comments ↓ 3,366 views
2006-2011 Ford Fusion GPS Bluetooth DVD Car Radio after installation

There is no denying that you may easily get bored on a long trip if you have a factory radio in your car which only comes with single function. Under this circumstance, you can consider installing a new car radio to replace your factory radio to make you enjoy more advanced features. And you don’t have to worry about the installation since the installation process is not complicated. If you are inexperienced, you can ask a professional for help. Now I’d like to introduce a step-by-step 2006-2011 Ford Fusion car radio installation guide from Seicane for your reference.

2006-2011 Ford Fusion GPS Bluetooth DVD Car Radio after installation
2006-2011 Ford Fusion GPS Bluetooth DVD Car Radio after installation

Here are 4 tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2006-2011 Ford Fusion car radio installation guide

1. The original car radio.

The original car radio
The original car radio

2. Carefully pry the plastic trim plate with both of your hands, which is in front of the place where the old car radio is situated.

Carefully pry the plastic trim plate with both of your hands, which is in front of the place where the old car radio is situated
Carefully pry the plastic trim plate with both of your hands, which is in front of the place where the old car radio is situated
2-1
2-1

3. Use a Philips screwdriver to unscrew the four self-tapping screws.

Use a Philips screwdriver to unscrew the four self-tapping screws
Use a Philips screwdriver to unscrew the four self-tapping screws
3-1
3-1

4. Gently remove the original car radio out of the dash.

Gently remove the original car radio out of the dash
Gently remove the original car radio out of the dash

5. Disconnect the antenna and connectors at the back of the original car radio.

Disconnect the antenna and connectors at the back of the original car radio
Disconnect the antenna and connectors at the back of the original car radio

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original car radio’s plugs.

9. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. If the new Seicane car radio works well, put it into the dash.

11. Put everything into their original place, and all the installation is done.

 

Now do you make clear every detailed step of the above installation instruction? If not, please seek help from your dealer, someone experienced or a professional. However, if you are afraid of causing damage to your car radio or your car, you can go to a car radio upgrade center to have the new car radio installed by a professional technician. And since a car radio plays an important role in the installation, it is very essential for you to select an ideal car radio. If you have no ideas,   you can check out the following link which is a remarkable 2006-2011 Ford Fusion car radio from Seicane.

https://www.seicane.com/android-2006-2011-ford-fusion-hd-touchscreen-radio-gps-navigation-system-dvd-player-bluetooth-wifi-mirror-link-rearview-camera-steering-wheel-control-1080p-video-s127301e

Featured with a large 7 inch HD multi-touch screen with 1024*600resolution, this powerful car radio enables you to enjoy the best display effect of videos, movies, TV programs, etc, as well as have a good view of the road ahead.

The advanced GPS module is especially built in this unit to enable you to quickly locate where you are and accurately navigate to your desired destinations according to turn-by-turn directions and voice prompts even you are in an unfamiliar place. Additionally, it is possible for you to enjoy beautiful music while navigating thanks to this car radio’s dual zone function.

What’s more, with the help of the wireless Bluetooth technology, you can freely get access to Bluetooth hands-free calls and Bluetooth streaming music to keep you safe and have fun at the same time.

If you like this unit, just don’t forget to add this car radio to your shopping cart. Good luck to you!

The Effective Method to Install a 2006-2012 TOYOTA RAV4 Car Radio with GPS Navigation System Bluetooth DVD Player

Posted on by — No Comments ↓ 5,181 views
2006-2012 TOYOTA RAV4 Car Radio after installation

To enhance the capacities in your car as well as upgrade your in-car life, you can easily replace your factory radio with a brand new multifunctional car radio which can support a lot of comprehensive features for you to enjoy more convenience and enjoyment. If you have some experience on the installation, it is easier for you to install a new car radio in your car with a related installation guide. Here I would like to share the detailed 2006-2012 TOYOTA RAV4 car radio installation instruction with you. Wish it is helpful for you.

2006-2012 TOYOTA RAV4 Car Radio after installation
2006-2012 TOYOTA RAV4 Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006-2012 TOYOTA RAV4 car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Remove the panel by using plastic removal tool.

Remove the panel by using plastic removal tool
Remove the panel by using plastic removal tool

3. Unplug the hazard warning lights.

Unplug the hazard warning lights
Unplug the hazard warning lights

4. Remove the left panel and unplug the switch.

Remove the left panel and unplug the switch
Remove the left panel and unplug the switch

5. Unplug the switch.

Unplug the switch
Unplug the switch

6. Remove four screws.

Remove four screws
Remove four screws
6-1
6-1 a. Position for screws.

7. Pull out the factory radio.

Pull out the factory radio
Pull out the factory radio

8. The back of the original car radio.

The back of the original car radio
The back of the original car radio

9. Remove 8 screws from original car radio.

Remove 8 screws from original car radio
Remove 8 screws from original car radio
9-1
9-1

10. Remove 2 screws at the top of the new radio.

Remove 2 screws at the top of the new radio
Remove 2 screws at the top of the new radio
10-1
10-1

11. Install 8 screws to new car radio.

Install 8 screws to new car radio
Install 8 screws to new car radio

12. Plug into factory plugs.

Plug into factory plugs
Plug into factory plugs

13. All plugs after connection.

All plugs after connection
All plugs after connection
13-1
13-1

14. Check all the accessories for the new Seicane car radio.

15. Connect the harnesses to the back of the new Seicane car radio.

16. Connect the Seicane car radio to your original car radio ‘s plugs.

17. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

18. If the new Seicane car radio works well, put it into the dash.

19. Put everything into their original place, and all the installation is done.

 

Please don’t worry if you have any doubts about your car radio and your car. To overcome your doubts, you can contact your dealer, or seek help from someone experienced or a professional. Anyway, it is very vital for you to check if your new car radio can fit your car well. If it is not compatible enough, you’d better quit it and buy another suitable one. Here I would like to share a fabulous 2006-2012 TOYOTA RAV4 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-aftermarket-radio-for-2006-2012-toyota-rav4-with-gps-navigation-hd-touchscreen-dvd-player-bluetooth-wifi-mirror-link-steering-wheel-control-1080p-video-s127106e

Upgraded to the stable Android 6.0 operation system, 8- core 1.5 GHz RK-PX5 A53 processor and 32GB Inland flash as well as 2GB RAM, this unit’s capabilities and performance can be enhanced to a large extent.

You won’t get lost any more since this car radio is equipped with the high-accuracy worldwide real-time GPS navigation system. When you turn on GPS function, you can quickly locate where you are and find the right way to reach your desired destinations according to turn-by-turn directions and voice prompts. And while navigating, you can freely listen to your favorite music thanks to this unit’s dual zone function.

Under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this unit, so you can dial, answer, reject and mute hands-free calls as well as listen to Bluetooth streaming music from your phone music playlists without taking your hands off the steering wheel.

Wish you like this unit and good luck to you!

How to Replace a 2007 2008 2009 2010 2011 2012 2013 Toyota Land Cruiser 200 Car Radio with Bluetooth GPS Audio Navigation System

Posted on by — 4 Comments ↓ 6,594 views
2007 2008 2009 2010 2011 2012 2013 Toyota Land Cruiser 200 Car Radio after installation

There is no denying that an ideal car radio can plays a very significant role in a car as a center practical and entertainment unit. If you are tired of your factory radio’s simple functions, you can find a related car radio installation guide to help you deal with the installation. Here I would like to share a 2007 2008 2009 2010 2011 2012 2013 Toyota Land Cruiser 200 car radio installation guide from Seicane with you. If you have the same or similar dashboard, you can read the following guide carefully. Wish you can get some help from it.

2007 2008 2009 2010 2011 2012 2013 Toyota Land Cruiser 200 Car Radio after installation
2007 2008 2009 2010 2011 2012 2013 Toyota Land Cruiser 200 Car Radio after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2007 2008 2009 2010 2011 2012 2013 Toyota Land Cruiser 200 car radio installation steps

1. Remove the padded covers from the two sides of the lower section at the center of the dash.

Remove the padded covers from the two sides of the lower section at the center of the dash
Remove the padded covers from the two sides of the lower section at the center of the dash
1-1
1-1

2. Next remove the silver Philips-head screw at the top and unclip the plastic retainer at the bottom of each side cover.

Next remove the silver Philips-head screw at the top and unclip the plastic retainer at the bottom of each side cover
Next remove the silver Philips-head screw at the top and unclip the plastic retainer at the bottom of each side cover

3. Remove the side covers by pulling them towards the rear of the vehicle and slightly outwards.

Remove the side covers by pulling them towards the rear of the vehicle and slightly outwards
Remove the side covers by pulling them towards the rear of the vehicle and slightly outwards
3-1
3-1

4. Carefully remove the top cover by using a plastic flat removal tool.

5. Remove the air conditioning vents, and then disconnect the temperature control wires.

Remove the air conditioning vents, and then disconnect the temperature control wires
Remove the air conditioning vents, and then disconnect the temperature control wires

6. Remove the radio fascia and disconnect the wires at the back of it.

Remove the radio fascia and disconnect the wires at the back of it
Remove the radio fascia and disconnect the wires at the back of it

7. Pull out the lower segment containing the ashtray and power outlets.

8. Remove the air conditioning control and display section and its wiring connector.

Remove the air conditioning control and display section and its wiring connector
Remove the air conditioning control and display section and its wiring connector
8-1
8-1

9. Remove screws that fix the radio on the dashboard.

10. Disconnect the connectors at the back of the radio.

11. Check all the accessories for the new Seicane car radio.

12. Connect the harnesses to the back of the new Seicane car radio.

13. Connect the Seicane car radio to your original radio’s plugs.

14. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

15. Put the new Seicane car radio into the dash.

16. Put everything into their original place.

 

Wish you can learn some skills from the above installation instruction. If there are any difficulties you met and don’t know how to overcome, you can seek help from your dealer, someone experienced or a professional. If you still think it hard for you to finish the whole installation process, you can directly arrange a professional technician to help you install the new car radio.

However, if you are still searching for an ideal car radio for your car, you can check out the following link which is a remarkable 2007 2008 2009 2010 2011 2012 2013 Toyota Land Cruiser 200 car radio from Seicane.

https://www.seicane.com/cheap-8-inch-2007-2008-2009-2010-2011-2012-2013-toyota-land-cruiser-200-radio-replacement-with-android-dvd-navigation-auto-a-v-system-with-multi-touch-capacitive-screen-3g-wifi-radio-rds-bluetooth-music-mirror-link-obd-dvr-hd-1080p-backup-s128102e

This car radio is running on the most stable Android 6.0 operation system, a powerful 8-core 1.5 GHz RK-PX5 A53 processor and 32GB Inland flash as well as 2GB RAM. It comes with a wide range of practical and entertainment features to meet with your different requirements, mainly including 3D GPS navigation system, FM/ AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, DVD player, steering wheel control, USB connection, etc. Making full use of these upgraded and new features allows you to enjoy a lot of convenience and enjoyment.

Apart from these main features, you can also add some optional features to this unit, like as car DVR, OBD2, DAB, backup camera, TPMS, etc. For instance, you can add a backup camera to this unit for automatically switching to the parking image while reversing, which is good for your driving safety.

Wish you enjoy your wonderful trip accompanied with this unit and good luck to you!

The Best Tutorial on a 2006-2013 BMW Mini Cooper GPS Bluetooth Car Stereo Removal and Installation

Posted on by — 14 Comments ↓ 16,462 views
2006-2013 BMW Mini Cooper GPS Bluetooth Car Stereo after installation

Have you ever tried to install a car stereo before? If not, you may think it very hard for you to finish the whole installation process of a car stereo. As a matter of fact, with a step-by-step installation instruction and some related installation experience, you can also try to deal with the installation. However, if it is the first time for you to upgrade your factory radio, you’d better ask a professional for help. The following is a detailed 2006-2013 BMW Mini Cooper car stereo installation guide. You can read it carefully before you start to install your new car stereo.

2006-2013 BMW Mini Cooper GPS Bluetooth Car Stereo after installation
2006-2013 BMW Mini Cooper GPS Bluetooth Car Stereo after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2006-2013 BMW Mini Cooper car stereo installation guide

1. Remove two tabs in the air conditioning vent above the dash.

Remove two tabs in the air conditioning vent above the dash
Remove two tabs in the air conditioning vent above the dash

2. Remove the tachometer and set it aside.

Remove the tachometer and set it aside
Remove the tachometer and set it aside

3. Remove the crew pocket panel with a lever, then put it aside.

Remove the crew pocket panel with a lever, then put it aside
Remove the crew pocket panel with a lever, then put it aside

4. Open the glove box compartment, and remove the panel inside shown as the picture.

Open the glove box compartment, and remove the panel inside shown as the picture
Open the glove box compartment, and remove the panel inside shown as the picture

5. Pop out the panel beneath the steering wheel with a lever and your hands.

Pop out the panel beneath the steering wheel with a lever and your hands
Pop out the panel beneath the steering wheel with a lever and your hands

6. Remove the side panel with a lever and your hands.

Remove the side panel with a lever and your hands
Remove the side panel with a lever and your hands

7. Remove the other side panel shown as the picture with a lever.

Remove the other side panel shown as the picture with a lever
Remove the other side panel shown as the picture with a lever

8. Remove the panel under the air-conditioning control with a lever.

Remove the panel under the air-conditioning control with a lever
Remove the panel under the air-conditioning control with a lever

9. Unscrew all the screws holding the plastic cover with a screwdriver.

Unscrew all the screws holding the plastic cover with a screwdriver
Unscrew all the screws holding the plastic cover with a screwdriver

10. Remove the panel on the factory radio with your hands.

Remove the panel on the factory radio with your hands
Remove the panel on the factory radio with your hands

11. Remove the plastic cover of the whole air conditioning control.

Remove the plastic cover of the whole air conditioning control
Remove the plastic cover of the whole air conditioning control

12. Disconnect the connectors at the back of the cover.

Disconnect the connectors at the back of the cover
Disconnect the connectors at the back of the cover

13. Unscrew all screws holding the factory radio with a screwdriver.

Unscrew all screws holding the factory radio with a screwdriver
Unscrew all screws holding the factory radio with a screwdriver

14. Gently take the factory radio out of the dashboard.

15. Check all the accessories for the new Seicane stereo.

Check all the accessories for the new Seicane stereo
Check all the accessories for the new Seicane stereo

16. Connect the harnesses to the back of the new Seicane stereo.

Connect the harnesses to the back of the new Seicane stereo
Connect the harnesses to the back of the new Seicane stereo

17. Connect the Seicane stereo to your original car radio’s plugs.

18. Check whether the new Seicane stereo is working without problem.

19. If there is no problem, firm removed screws and bolts that are put aside, then make trim panel back on your new Seicane stereo.

 

Please don’t worry if you encounter any problems about the installation. To solve these problems, you can seek help from your dealer, someone experienced or a professional. If you are afraid of causing damage to your car stereo or your car, you can just go to a car stereo upgrade center to ask a technician to help you install the car stereo.

However, if you are still looking for a suitable car stereo for your beloved car, you might as well check out the following link which is a 2006-2013 BMW Mini Cooper GPS Bluetooth Car Stereo from Seicane.

https://www.seicane.com/android-2006-2013-bmw-mini-cooper-s-d-radio-dvd-player-gps-navigation-system-with-hd-touch-screen-wifi-mirror-link-usb-sd-bluetooth-music-aux-1080p-video-digital-tv-steering-wheel-control-s127017e

This intelligent car stereo runs on the pure Android 6.0 operation system, 8 – Core 1.5 GHz RK-PX5 A53 processor and 32GB Inland flash as well as 2GB RAM. So with such a car stereo installed in your car, you will be provided with the best services thanks to the enhanced capacities, higher configuration and better performance.

With the assistance of the high-accuracy 3D GPS navigation function, you don’t need to worry about getting lost any more even though you don’t have a good sense of directions. With the GPS function, you have no difficulties knowing your current locations and finding the right way to get to your destinations through turn-by-turn directions and voice prompts.

And what’s more, under the wireless Bluetooth technology, you can dial, answer, reject and mute hands-free calls as well as listen to streaming music from your phone.

Wish you like it! Good luck to you!