How to Remove and Install a 2009-2013 Toyota Prius Left GPS Bluetooth DVD Car Radio

2009-2013 Toyota Prius Left GPS Bluetooth DVD Car Radio after installation

There is no denying that with a new multifunctional car radio installed in your car, you will enjoy a lot of convenience and enjoyment in your car all the way. If are fed up with your factory radio due to its single functions, you can consider replacing it with a new multifunctional car radio. To install a new car radio, you can turn to a detailed installation guide for help. If you own a   , then you can carefully refer to the detailed 2009-2013 Toyota Prius Left car radio installation instruction.

2009-2013 Toyota Prius Left GPS Bluetooth DVD Car Radio after installation
2009-2013 Toyota Prius Left GPS Bluetooth DVD Car Radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009-2013 Toyota Prius Left car radio installation instruction

1. Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool.

Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool
Remove the shift panel right of the steering wheel. The panel simply pulls free of the dash with medium force from a trim pry tool

2. Remove the dash panel below the radio. Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash.

Remove the dash panel below the radio. Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash
Remove the dash panel below the radio. Grab the panel by the right edge and pull with significant force to detach the plastic pin that holds the panel in place. Grab the bottom edge of the panel and pull it from the dash

3. Remove the vent panel to the right of the radio as you did the left panel. It is only connected with clips that can be pulled free with moderate force.

Remove the vent panel to the right of the radio as you did the left panel. It is only connected with clips that can be pulled free with moderate force
Remove the vent panel to the right of the radio as you did the left panel. It is only connected with clips that can be pulled free with moderate force

4. Disconnect the wiring.

Disconnect the wiring
Disconnect the wiring

5. Remove the radio by removing the four screws near the corners of the radio mounting bracket with a Phillips-head screwdriver.

Remove the radio by removing the four screws near the corners of the radio mounting bracket with a Phillips-head screwdriver
Remove the radio by removing the four screws near the corners of the radio mounting bracket with a Phillips-head screwdriver

6. Pull the radio toward you slowly.

Pull the radio toward you slowly
Pull the radio toward you slowly

7. Pull the radio from its dock and pull the wire groups from the back of the radio. Grab the groups by the white plastic wire binders, not the wires themselves.

Pull the radio from its dock and pull the wire groups from the back of the radio. Grab the groups by the white plastic wire binders, not the wires themselves
Pull the radio from its dock and pull the wire groups from the back of the radio. Grab the groups by the white plastic wire binders, not the wires themselves

8. Check all the accessories for the new Seicane car radio.

9. Connect the harnesses to the back of the new Seicane car radio.

10. Connect the Seicane car radio to your original car radio’s plugs.

11. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane radio into the dash.

13. Put everything into their original place.

 

Wish the above installation steps can be helpful for you. Whether you have doubts about your car radio or your car, you can seek help from your dealer, someone experienced or turn to a professional for help. Anyway, it is very essential for you to check the compatibility between your new car radio and your car firstly. If your new car radio is not compatible enough, you’d better quit it and purchase a new one. Here I would like to share an amazing 2009-2013 Toyota Prius Left car radio from Seicane to you. For more information, please click:

https://www.seicane.com/android-hd-touch-screen-radio-for-2009-2013-toyota-prius-left-with-dvd-player-gps-navigation-bluetooth-music-wifi-mirror-link-rearview-camera-aux-s128009e

This amazing car radio, upgraded to the pure stable Android 6.0 operation system and a powerful 8-core 1.5 GHz RK-PX5 A53 processor, is up-to-date enough to be the best replacement for your factory radio in your car.

You don’t have to worry about getting lost any longer with this car radio installed in your car. According to turn-by-turn directions and voice prompts provided by the high-accuracy worldwide real-time GPS navigation system, you will easily and quickly know your current locations and accurately navigate to your desired destinations.

Through the Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, you can make, receive, reject and mute Bluetooth hands-free calls as well as freely listen to your favorite music streaming from your phone music playlists with keeping your hands on the steering wheel and your eyes on the road ahead, which add a lot of convenience and joyfulness to your driving.

Wish you like this unit and good luck to you!

2 comments on “How to Remove and Install a 2009-2013 Toyota Prius Left GPS Bluetooth DVD Car Radio

    • “Dear,
      This is Seicane.com.
      Thanks for interested in our product.
      Could you please send us the photo of your car’s dashboard to [email protected]?  
      And could you please tell us the model and year of your car?
      Then we can check if our unit fit your car ,hope you could cooperate with us.
      Looking forward to hearing from you soon.
      Thank you & Best regards!

Leave a Reply

Your email address will not be published. Required fields are marked *