The Effective Method to Install a 2006-2012 TOYOTA RAV4 Car Radio with GPS Navigation System Bluetooth DVD Player

2006-2012 TOYOTA RAV4 Car Radio after installation

To enhance the capacities in your car as well as upgrade your in-car life, you can easily replace your factory radio with a brand new multifunctional car radio which can support a lot of comprehensive features for you to enjoy more convenience and enjoyment. If you have some experience on the installation, it is easier for you to install a new car radio in your car with a related installation guide. Here I would like to share the detailed 2006-2012 TOYOTA RAV4 car radio installation instruction with you. Wish it is helpful for you.

2006-2012 TOYOTA RAV4 Car Radio after installation
2006-2012 TOYOTA RAV4 Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006-2012 TOYOTA RAV4 car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Remove the panel by using plastic removal tool.

Remove the panel by using plastic removal tool
Remove the panel by using plastic removal tool

3. Unplug the hazard warning lights.

Unplug the hazard warning lights
Unplug the hazard warning lights

4. Remove the left panel and unplug the switch.

Remove the left panel and unplug the switch
Remove the left panel and unplug the switch

5. Unplug the switch.

Unplug the switch
Unplug the switch

6. Remove four screws.

Remove four screws
Remove four screws
6-1
6-1 a. Position for screws.

7. Pull out the factory radio.

Pull out the factory radio
Pull out the factory radio

8. The back of the original car radio.

The back of the original car radio
The back of the original car radio

9. Remove 8 screws from original car radio.

Remove 8 screws from original car radio
Remove 8 screws from original car radio
9-1
9-1

10. Remove 2 screws at the top of the new radio.

Remove 2 screws at the top of the new radio
Remove 2 screws at the top of the new radio
10-1
10-1

11. Install 8 screws to new car radio.

Install 8 screws to new car radio
Install 8 screws to new car radio

12. Plug into factory plugs.

Plug into factory plugs
Plug into factory plugs

13. All plugs after connection.

All plugs after connection
All plugs after connection
13-1
13-1

14. Check all the accessories for the new Seicane car radio.

15. Connect the harnesses to the back of the new Seicane car radio.

16. Connect the Seicane car radio to your original car radio ‘s plugs.

17. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

18. If the new Seicane car radio works well, put it into the dash.

19. Put everything into their original place, and all the installation is done.

 

Please don’t worry if you have any doubts about your car radio and your car. To overcome your doubts, you can contact your dealer, or seek help from someone experienced or a professional. Anyway, it is very vital for you to check if your new car radio can fit your car well. If it is not compatible enough, you’d better quit it and buy another suitable one. Here I would like to share a fabulous 2006-2012 TOYOTA RAV4 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-aftermarket-radio-for-2006-2012-toyota-rav4-with-gps-navigation-hd-touchscreen-dvd-player-bluetooth-wifi-mirror-link-steering-wheel-control-1080p-video-s127106e

Upgraded to the stable Android 6.0 operation system, 8- core 1.5 GHz RK-PX5 A53 processor and 32GB Inland flash as well as 2GB RAM, this unit’s capabilities and performance can be enhanced to a large extent.

You won’t get lost any more since this car radio is equipped with the high-accuracy worldwide real-time GPS navigation system. When you turn on GPS function, you can quickly locate where you are and find the right way to reach your desired destinations according to turn-by-turn directions and voice prompts. And while navigating, you can freely listen to your favorite music thanks to this unit’s dual zone function.

Under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this unit, so you can dial, answer, reject and mute hands-free calls as well as listen to Bluetooth streaming music from your phone music playlists without taking your hands off the steering wheel.

Wish you like this unit and good luck to you!

How to Remove and Install a 2006-2012 TOYOTA RAV4 Car Radio with Bluetooth GPS Navigation System

2006-2012 TOYOTA RAV4 Car Radio after installation

When driving out, you must want to get to a lot of locations without getting lost and have great entertainment at the same time. In that case, it is necessary for you to install a powerful car radio which is integrated with GPS navigation function and entertainment features. If you are tired of your factory radio and want to replace it, then a detailed removal and installation guide can be helpful for you. The following instruction is about a 2006-2012 TOYOTA RAV4 car radio from Seicane. If you happen yo have the same dashboard, you can take it as a reference.

2006-2012 TOYOTA RAV4 Car Radio after installation
2006-2012 TOYOTA RAV4 Car Radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006-2012 TOYOTA RAV4 car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Remove the panel by using plastic removal tool.

Remove the panel by using plastic removal tool
Remove the panel by using plastic removal tool

3. Unplug the hazard warning lights.

Unplug the hazard warning lights
Unplug the hazard warning lights

4. Remove the left panel and unplug the switch.

Remove the left panel and unplug the switch
Remove the left panel and unplug the switch

5. Unplug the switch.

Unplug the switch
Unplug the switch

6. Remove four screws.

Remove four screws
Remove four screws

a. Position for screws.

6-1 Position for screws
6-1 Position for screws

7. Pull out the factory radio.

Pull out the factory radio
Pull out the factory radio

8. The back of the original car radio.

The back of the original car radio
The back of the original car radio

9. Remove 8 screws from original car radio.

Remove 8 screws from original car radio
Remove 8 screws from original car radio
9-1
9-1

10. Remove 2 screws at the top of the new radio.

Remove 2 screws at the top of the new radio
Remove 2 screws at the top of the new radio
10-1
10-1

11. Install 8 screws to new car radio.

Install 8 screws to new car radio
Install 8 screws to new car radio

12. Plug into factory plugs.

Plug into factory plugs
Plug into factory plugs

13. All plugs after connection.

All plugs after connection
All plugs after connection
13-1
13-1

14. Check all the accessories for the new Seicane car radio.

15. Connect the harnesses to the back of the new Seicane car radio.

16. Connect the Seicane car radio to your original car radio ‘s plugs.

17. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

18. If the new Seicane car radio works well, put it into the dash.

19. Put everything into their original place, and all the installation is done.

 

After reading the above installation guide, perhaps now you have a general understanding of the installation on a 2006-2012 TOYOTA RAV4 car radio. If there are any doubts, you are welcome to ask for a wiring diagram from your dealer or seek for professional suggestion from a professional. However, if you don’t know which kind of car stereos can work well in your car, I’d like to recommend a fabulous 2006-2012 TOYOTA RAV4 car radio from Seicane to you. For more information, please click:

http://www.seicane.com/android-aftermarket-head-unit-for-2006-2012-toyota-rav4-with-hd-touchscreen-1024-600-radio-rds-gps-navigation-system-bluetooth-wifi-mirror-link-steering-wheel-control-quad-core-s127106

Loaded with the stable Android 5.1.1 operation system and a high quality RK3188 1.6 GHz Cortex A9 Quad-core processor, this unit’s capabilities and performance can be enhanced to provide you with the best services.

Coming with a 7 inch multi-touch screen with 1024*600 pixels, this unit enables you to enjoy the best display effect when you are watching videos, TV programs and movies. Besides, it can provide you with the perfect view of the road ahead.

What’s more, numerous features are compatible with this unit, including 3D GPS navigation, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth music, CD/DVD player, steering wheel control, USB&SD connection, etc. As long as you take full advantage of these features, you will definitely embrace a brand new driving experience.

Wish you like this unit and good luck to you!