How to install the 2004-2008 Chrysler 300C radio with USB SD AUX Rearview Mirror Camera MP3

 

 

 

 

 

 

Now, it doesn’t cost a lot of money to upgrade some things in the car, while the radio is the main entertainment center of the car, many car owners want to replace the factory radio to improve their driving comfort.Next, I will tell you how to install new head unit, I will take 2004-2008 Chrysler 300C as an example to tell you the detailed installation steps. If your dashboard is the same as the picture below, then you can refer to the following introduction.

 

Tips:

  1. Remember to disconnect the power supply before installation.
  2. Before removing and installing, remember to prepare a lever and screwdriver.
  3. Keep all parts separate from the car. Please take care to avoid scratches during the disassembly and installation of the dashboard,use the original screws in your car as much as possible to ensure that the parts are securely attached.
  4. If you need it, here are the recommended tools for removal and installationfrom Seicane, Please purchase according to your needs.
    https://www.seicane.com/car-dvd-dismantling-device-srd-400

 

installation instructions for 2004-2008 Chrysler 300C radio 

  1. Use a lever to remove the ornaments above the cup holder
  2. Remove the two screws behind the trim panel
  3. Gently pry open the side of the trim with a lever and remove the trim
  4. Remove the 4 screws that hold the factory radio
  5. Take out the factory radio
  6. Disconnect the small wire harness behind the factory radio

  7. Connect the Seicane car radio to the plug of your original car radio.
  8. A small wire harness attached to the back of a new radio
  9. Put the new Seicane radio back on the dashboard.
  10. Install four screws and trim plates
  11. Install two screws on and behind the trim panel
  12. Turn on the new radio and do a full test
  13. Pack up your things in the car,all installation steps are complete

 

I hope this installation instruction will help you install the radio. If you still can’t install it, you can go to the car Radio Upgrade center for installation or seek professional help. If you have any other problems, you can consult your dealer.

If you haven’t found a suitable radio for your car, Why not try to buy our 2004-2008 Chrysler 300C radios, please click the link below.

https://www.seicane.com/for-2004-2008-chrysler-300c-radio-android-gps-navigation-system-with-bluetooth-hd-touchscreen-carplay-support-digital-tv-h353

This Chrysler 300C radio is equipped with Android 10.0 operation system and High quality 8 – Core 1.5 GHz Coretex-A53 processor and 4GB RAM 64G ROM 2.5D IPS Screen Built-in Carpaly with great performance,This modern radio comes with a number of useful features and entertainment options for you to upgrade your factory radio,which includes High Speed 3G&4G&WiFi Internet,3D Navigation,FM/AM radio tuner,File Management,Steering wheel control,etc.What are you waiting for? Buy now to experience more comfortable driving environment.

 

 

How to change the Boot logo on Seicane H5 series GPS Navigation Radio

Recently, many Seicane users asked us how to change the boot logo of H5 series GPS Navigation Radio, so today this blog will teach you how to make boot animation documents.

Boot logo can be divided into 2 types: static LOGO and dynamic LOGO.

①Static Logo is to make a 1024*600 Logo image, the image is stored in BMP format, Windows file format, and the depth is 32 bits.

 

 

 

 

 

 

 

 

 

 

②Dynamic LOGO need to make a boot animation document, you have to generate a dedicated ZIP file.The zip animation has two parts, part0 and part1. In general, part0 is typically played once, and part1 is typically played in a loop until the system has been booted.

Now Let’s take a look at the steps to make the animation file.

Firstly,Create a new Boot Animation folder and inside the Boot Animation create two new directories, part0, Part1 and a text file desc.txt.

Secondly,Make animated picture frames. If you want to make your animation more beautiful, you can use Flash to make your own animation video at first, then use SWF2Video Pro to export Flash images into PNG format by frame, and then use PhotoShop to save the exported PNG images into PNG-24 format such as 1. PNG, 2. PNG, 3. PNG… Finally, place the action sequence into parts 0 and 1. It is certainly possible to have two different sets of animated images in part0 and part1.

Thirdly,Desc.txt is saved in ANSI format to set the animation pixel size, frame number, flicker times, folder name, etc. Here is an example of a desc.txt file: 1024 600 25 p 1 0 part0 p 0 2 part1.

 

 

 

 

 

 

 

It must be noted here that part1 in the example must be followed by The enter key, otherwise part1 will not be recognized, resulting in only the picture of part0 being played.

Let’s take a brief look at the meaning of each parameter in the file:hat part1 in the example must be followed by The enter key, otherwise part1 will not be recognized, resulting in only the picture of part0 being played.

1024 600 25: Represents images playing at 1024×600 resolution, 25 images per second.

P 1 0 part0: P is a symbol which means to play the pictures in Part0 in order once, with an interval of 0 frames.

P 0 2 part1: play the picture in part1 zero times (in a loop) until the system is booted. The amount of time it takes two frames between loops.

Fourthly,Go to the boot animation directory and package part0, Part1, and desc.txt as boot animation.zip

notice:If you are using tools to package in Windows system, you can choose “Store” directly.

The bootanimation.zip generation is complete as shown in the picture.

 

 

 

 

 

 

 

 

 

 

 

 

After all the files have been produced, Please copy the file to the USB flash drive, enter the Settings screen, setting-> Logo settings-> ANIMATION SELECT UDISK1. See the video below for detailed instructions.

 

Click on the link below to know about the latest Seicane  H5 series GPS Navigation Radio

https://www.seicane.com/polegadas-tudo-em-um-android-gps-sistema-de-navegac-o-para-2004-2012-bmw-x3-com-touch-screen-tpms-dvr-obd-ii-camera-aux-usb-sd-controle-de-volante-3g-wifi-video-radio-bluetooth-s089906

How to determine whether the original car is equipped with fiber amplifier and which products are suitable for my car?

My Dear, when you are buying optical fiber decoder for your car, have you ever felt confused and do not know how to choose when facing various optical fiber decoder on the market. Today this blog is to introduce our SC95 and SC96 series of fiber decoder and suitable car models as well as suitable car GPS Navigation Radio if you want.

So, How to determine whether the original car is equipped with fiber amplifier.

If your car is one of the following models,and your car has such a plug a according to the pictures Then our SC95 series products are applicable.

①Mercedes-Benz SL Class R230 SL350 SL500 SL55 SL600 SL65

Year: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008

②Mercedes-Benz SLK Class W171 R171 SLK200 SLK280 SLK300 SLK350 SLK55

Year: 2004,2005, 2006, 2007, 2008, 2009, 2010, 2012

③Mercedes-Benz G-Class W463 G550 G500 G400 G320 G270 G55

Year: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008

④Mercedes-Benz CLK-W209

Year: 2005, 2006

⑤Mercedes-Benz CLS-W219 CLS350 CLS500 CLS55

Year: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

⑥Mercedes-Benz E-Class W211 E200 E220 E230 E240 E270 E280 E300 E320 E350 E420 E500 E550 E55 E63

Year: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

 

 

 

 

 

 

 

 

 

 

 

 

If you are interested SC95 series product, please click the link below to buy it.

https://www.seicane.com/2001-2008-mercedes-benz-sl-r230-sl350-sl500-sl55-sl600-sl65-car-optical-fiber-decoder-most-box-interface-bose-harmon-kardon-digital-audio-dac-amplifier-sc02-01c

And also If you still need a car GPS Navigation Radio, you can know more about our products,  Please click on the following link.

https://www.seicane.com/android-gps-navegac-o-radio-para-2001-2010-mercedes-benz-e-classe-w211-cls-w219-clk-w209-g-w463-com-hd-touchscreen-carplay-bluetooth-support-obd2-swc-h2287

 

If your car is one of the following models,and has such a plug according to the pictures .Then our SC96 series products are applicable.

①Mercedes-Benz R Class W251 R280 R300 R320 R350 R63 SL600 SL65

Year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

②Porsche Cayenne SL600 SL65

Year: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

③Mercedes-Benz GL Class X164 GL300 GL320 GL350 GL420 GL450 GL500 GL550 SL600 SL65

Year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

④Mercedes-Benz ML Class W164 ML280 ML300 ML320 ML350 ML420 ML450 ML500 ML550 ML63 SL600 SL65

Year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

 

 

And If you are interested in SC96 series product, please click the link below to buy it

https://www.seicane.com/2005-2013-mercedes-benz-r-class-w251-r280-r300-r320-r350-r63-car-optical-fiber-decoder-most-box-bose-harmon-kardon-audio-decode-dac-optic-interface-sc69

Also, if your car is one of these above models and you need a car, click on the link below

https://www.seicane.com/2003-2010-porsche-cayenne-hd-touch-tela-android-radio-gps-sistema-de-navegac-o-wi-fi-bluetooth-music-mirror-link-obd2-1080p-video-s6941g

H5M-O series GPS Radio,The choice you will not regret

For those of you reading this blog, you must be struggling with your choice of car GPS Navigation Radio, well, you have found a treasure that because you don’t have to worry about how to choose a suitable car gps radio, this H5M-O series GPS Navigation Radio will be the one you will neve regret.

 

 

 

 

 

 

 

 

 

 

Now here are main information about H5M-O series

Product specifications

Product feature: 8-cord; Android 9.0; 4G+64; 4G full Netcom+360 panoramic view+carplay+2.5DIP screen+RDS+DSP

System: Android 9.1

Processor Core: 4+4 frequency: 2.5 GHz

RAM: 4GB DDR4

Display: IPS screen

Touch screen: 2.5D tempered curved screen

360 degree camera: AC825X

Resolution: 1024*600, 1280*480, 768*1024, 800*1280, 1280*720, up to 1920*1080 Full HD

Radio: FM1; FM2; FM3;

Satellite navigation system: MT6631 GPS+Beidou/Glonass/Galileo/Japan Quasi-Zenith

 

 

 

 

 

Product Function

Support GPS: Built in GPS module, support both online and offline navigation app from Google Play app market

Bluetooth:It upgrades your car with Bluetooth module for hands-free calls and music streaming
with ring-tones and voice coming out from the car speakers.

 

 

 

 

 

 

 

 

 

 

Support DVR:It can record video only to storage in GPS slot card/SD slot card/NAND FLASH/USB storage.

FM/AM/RDS RADIO:It integrated with High-Sensitive radio IC with good reception, supports worldwide analog radio channels reception.

 

 

 

 

 

 

 

 

 

 

 

Support Rear view Camera:Supports RCA AV connector type rear camera signal input automatically switch to parking image when reversing gear engaged.

Support 36EQ DSP:It has real 36 EQ adjustable segments and can adjust the delay, cut the frequency adjust the volume of each channel, turn over each RCA phase separately.

 

 

 

 

 

 

 

 

 

 

 

Built-in Carplay:This Carplay USB dongle can support the CARPLAY USB product Support all Android Car DVD products, the original car voice control,the original car screen touch.

Support OBD:(Optional Function)With this OBDIl Scanner, you can connect it to your cars DLC port and open the unit’s Bluetooth for monitoring the car’s fuel consumption, water temperature, revolving speed, environment temperature, intake pressure, throttle position, air flow computer load, car speed etc in the OBD interface.It compatible with most of ELM327 OBDll dongle with 4 digits pair code on the market.both Bluetooth WiFi type are supported, read and sync the real-time data from your car computer.

2.5D Curved Touch Screen:With 2.5D curved-display screen this device looks very exquisite and it is seamless. Its screen feels very smooth and flawless. Just enjoy a visual feast on this display with 1024×600 pixels

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Click the link below to learn more about H5M-O product information

https://www.seicane.com/hd-touch-screen-android-gps-navegac-o-radio-para-2006-2011-honda-civic-com-bluetooth-wifi-obd2-usb-audio-aux-1080p-retrovisor-camera-s0411

Frequently Asked Questions Before Order

Before you buy our products, you may have some questions about products. So, we will answer some questions you may have before the order.

Q1: Do I need to buy extra Carplay for H2 series?

A: No, the H2 series has  built-in Carplay.

 

Q2: Does the H6 series have  built-in Carplay?

A: No, you need to buy a Carplay dongle. Please buy at the following link:

https://www.seicane.com/plug-and-play-carplay-android-auto-usb-don gle-for-android-car-radio-support-ios-iphone-car-touch-screen-control- siri-microphone-voice-control-s01001

 

Q3: My car is 2012 Mercedes SLKR171 with HarmonKardon system. What  decoder do I need to buy to support it?

A: You need to buy fiber decoder box. Please buy at the following link:

https://www.seicane.com/catalogsearch/result/?cat=0&q=SC95

 

Q4: I need to order the android audio for 2015 Toyota Camry, Does it Come complete with every thing I need to install it?

A: Dear thanks for interested in our product.Could you please send us the photo of your car’s dashboard。Then we can help you to check it.yes,the unit will come with all needed cables.

Q:

 

A: OK, Dear. We have unit which can fit your car. Please order it at the following link:

https://www.seicane.com/android-head-unit-gps-navigation-system-for -2012-2013-2014-toyota-camry-with-dvd-player-bluetooth-mirror-link-r adio-capacitive-multi-touch-screen-obd-dvr-rear-view-camera-tv-3g-wi fi-usb-sd-s168016

 

Q5: Does your car navigation system support the camera of the original car?

A: Part of the machine can support, the specific depends on the machine is equipped with wire.

 

Q6: Can the engine support the original camera?

A: If our wiring diagram has a connection for the camera, it does.

 

Q7:Is there any discount for an order now?

A:We have a 3% discount code – SC3. We can give you 3% off discount, you can use the code of SC3,is that ok.

 

Q8: How soon can we ship the order?

A: We need 1-5 days to process your order, and then it takes about 6-15 days to reach your door after shipping.

 

Q9: What is the freight charge for product?

A: Please add this unit to cart,then choose the country you want to ship to,Shipping fees will be estimated by our system automatically.

 

Q10: Can it be delivered to my country. Do I need to pay tariffs?

A: Yes, for orders from European countries, we will ship the goods from Czech warehouse without paying customs duties. If there are tariffs in other countries, we will pay part of the freight for you.

 

Q11: How long is the warranty?

A: All of our products are covered by a 12-month warranty for its replacement and repair.

 

Q12: Where will the goods be shipped from?

A: We have American warehouse, Czech warehouse and Chinese warehouse. We choose the warehouse according to your shipping address.

DSP car audio sound system-extreme music enjoyment

With the advance of science and technology, people demand for cars has been in the update, once we require car runs fast, less fuel consumption, and today we begin to pay attention to the interior of the car. Listening to music while driving seems to be a necessary in the modern life, so a DSP car audio sound system is particularly important for ascending car comfort.


The DSP car audio sound system is for H2,H3 series products with a professional car DSP sound system with 8RCA outputs as an option.It has real 15EQ adjustable segments and can adjust the delay,cut the frequency,adjust the volume of each channel,turn over Each RCA phase separately.It has passive crossover mode,active two crossover mode,active three crossover mode,and equal output crossover modes.

 

 

 

The function of DSP car audio sound system is also very powerful

It has a true 15EQ real segment that can adjust delays, cut frequencies, adjust the volume of each channel, and flip each RCA phase separately.

2.DSP car audio sound system has passive crossover mode, active two crossover mode, active three crossover mode, and equal output crossover modes.

Here some following are instructions for DSP car audio sound system1.First step you need to open the DSP application — enter the tuning — click the password input field — enter the password: 128. If Password input Successfully, it will prompt : input successful, please be careful!
2.The output frequency dividing mode has: passive frequency dividing, two frequency dividing, three frequency dividing, three modes.
3.Delay function refers to the delay of the sound of a horn or channel,adjust the speaker close to the person through DSP audio algorithm, so that the sound from both sides reaches the person’s ear at the same time, and restore the center of the sound field stage to the middle position of the center console, so as to achieve the best listening effect.
4.Output volume setting: This machine has 8 channels of audio signal output, each of which can be separately adjusted volume, separately mute, separately reverse phase and other operations.
5.Effectors:The effectors interface mainly including: equal loudness, sound field, bass and other functions.
6.Equalizer:Equalizer has 15 true adjustable EQ, can save 3 user custom effects, 3 tuning mode effects, there are 6 preset effects optional.


There are some tips to instruct you to find a suitable frequency

Insufficient strength (add 125Hz)

Thin Voice (add 200-400Hz)

Sound weak (add 1K or so)

Voice position deviation (add 3KHz)

Sound not permeable (add 4K-8khz)

Insufficient sense of space (add 12K-16KHz)

Heavy bass (minus 160-200Hz)

Male laryngeal weight (minus 200Hz)

Nasal weight (minus 250HZ)

Sound turbidity (minus 60-80Hz)

Bass pressure ear (minus 125Hz)

Alto too thick (minus 400-500Hz)

Intermediate frequency grating on the ear (minus 1250-20000Hz)

The voice is too loud  (minus 3KHz)

High frequency harsh (minus 4K-6khz)

Dental prominent (minus 8KHz)

High pitch creepy (subtract 12KHz-16KHz)

Low frequency fullness (minus 60-80Hz)

DSP car audio sound system will bring the driver extreme music enjoyment and a kind of ear massage,DSP car audio sound system will make your driving time no longer be monotonous,Don’t be hesitate and  put it in your car now!

If you are thinking about replacing to a new radio support the RDS function and have no idea, you can refer to the following link, an extraordinary 2011-2014 2015 2016 2017 JEEP Wrangler from Seicane.

https://www.seicane.com/hd-touch-screen-2011-2016-jeep-wrangler-android-gps-navigation-radio-with-mirror-link-obd2-digital-tv-wifi-bluetooth-music-steering-wheel-control-rearview-camera-s301171

How to install a 2007-2018 Toyota FJ CRUISER Bluetooth Radio GPS System

With the improvement of people’s life, more and more families prefer to buy car for outside activities. However, the factory radio seems can not satisfy their needs, most of them choose to install a Bluetooth Radio GPS System which make it possible to listen to radio or music while navigation. This kind of function may entertain the dull journey and comfort the naught children. There is no doubt that Bluetooth Radio GPS System can make you trip more convenient and easier. Since most people have no idea of how to install the devices, here we will share you a simple way of how to install a 2007-2018 Toyota FJ CRUISER Bluetooth Radio GPS System. You can follow the steps as the video if your car is similar to this one.

 

 

Preparation for Installation:

1.Make sure the power has been cut off before installation to avoid any danger.
2. Check your professional car radio dismantling tools, screwdriver, 3M electronic tape, 3M double side tape, sleeve, cotton cloth.
3. Keep all the separate parts from the car.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

 

2007-2018 Toyota FJ CRUISER Bluetooth Radio GPS System Disassembly and Installation Steps:

 

1.  Original dashboard

2. Remove the frame of both left and right side

3. Remove the two screwson each side

4. Take the main frame out and pull out the plug on it

5. Remove the screws inside and take the original radio out

6. Pull out the plug on the original radio

7. Install the new screen on the main frame

8. Plug well the power harness/USB cable/GPS antenna

9. Fasten the two screws on the main frame

10. Fix the two frames on each side

11. Full Test

 

If you still don’t know how to operate after watching the video, you can find professional people around you to help you install the device. And if you don’t know which Bluetooth Radio GPS System is suitable for you, I would like to share you a  2007-2018 Toyota FJ CRUISER Bluetooth Radio GPS System for you. You can click the following link to find more details:

https://www.seicane.com/full-touchscreen-2007-2018-toyota-fj-cruiserradio-gps-navigation-system-bluetooth-3g-wifi-rearview-camera-mirror-link-obd2-dvr-steering-wheel-control-h6031k

With intelligent pure Android 8.1 operation system and 9 inch full touchscreen, it will be your perfect road companion. The system supports surfing internet via 3G or WiFi.You can download any applications in the android market for access to games.The car stereo is equipped with worldwide real-time navigation function of high accuracy. These function will provide you the best driving experience.

If you are interested in this devices, please don’t hesitate to contact us!

 

How to Install or Replace 2011 2012 BMW 5 Series F10/F11 CIC GPS Navigation Radio


car gps navigation radio for 2011 2012 BMW 5 Series
car gps navigation radio for 2011 2012 BMW 5 Series

Nowadays, car are playing very important roles in our daily life and it seems that the factory radio can not meet most people’s needs.The GPS Navigation Radio can not only guide your way ,but also entertain your dull trip. The dual zone function makes it possible to listen to radio/USB/SD music while navigating. In demand of good driving experiences, people would like to choose the GPS Navigation Radio to replace the original radio.  However, most people don’t know how to install a GRS Navigation Radio by themselves. Here, our Seicane will lead your way to know how to install or replace 2011 2012 BMW 5 Series F10/F11 CIC GPS Navigation Radio.

 

Precaution for Installation:

1. Cut off the power before installation to avoid any danger.

2. Please prepare professional car radio dismantling tools, screwdriver, 3M electronic tape, 3M double side tape, sleeve, cotton cloth.

3. Please keep all the separate parts from the car.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

Before installation, please check your car firstly. If it is similar to this type, then you can refer to this video to install or replace 2011 2012 BMW 5 Series F10/F11 CIC GPS Navigation Radio.

 

If you still have no idea of how to install or replace this kind of GPS Navigation Radio after watching the video, you can consult us or ask professional people around for help. And if you don’t know how to choose a GPS Navigation Radio, I would like to share you a remarkable 2011 2012 BMW 5 Series F10/F11 CIC GPS Navigation Radio for you. For more detailed information, you can go to the following website:

https://www.seicane.com/android-2011-2012-bmw-5-series-f10-f11-cic-hd-touchscreen-car-stereo-radio-head-unit-gps-navigation-bluetooth-phone-mp3-steering-wheel-control-wifi-backup-camera-s028208

With 8.8 /10.25 inch IPS screen, this unit looks very exquisite. Its screen feels very smooth and flawless. Just enjoy a visual feast on this 1280*480 resolution unit. It can support the original car’s all functions, such as radio or Bluetooth function, or the users can utilize this unit’s built-in radio or music function. Besides, its customized wallpaper allows you to set your own photo as background of the main menu.

If you have any question, please feel free to let us know!

How to Simply Install and Upgrade a 2013 2014 2015 2016 2017 2018 BMW 6 Series F06/F12 NBT GPS Navigation Radio

Many cars are equipped with a factory navigation system built into the dashboard. Maps are stored as software, so once new roads and intersections are developed or changed, the map will be out of date. More and more people are getting tired of the old one, and they are seeking for new GPS navigation system to satisfy their increasing demand. But installing it by themselves is a big problem. Don’t worry, here are some installation tips on 2013 2014 2015 2016 2017 2018 BMW 6 Series F06/F12 NBT GPS Navigation Radio, if you have a similar one, you can take it as a reference.

2013 2014 2015 2016 2017 2018 BMW 6 Series F06/F12 NBT GPS navigation radio after installation

Friendly reminder:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2013 2014 2015 2016 2017 2018 BMW 6 Series F06/F12 NBT GPS navigation radio installation guidance

1. Original dashboard.

Original dashboard.

2. Pry loose the right side air outlet.

Pry loose the right side air outlet.

3. Pry loose the left side air outlet.

Pry loose the left side air outlet.

4. Take out the air-conditioning decorated plate.

take out the air-conditioning decorated plate.

5. Take out the decorated strip.

Take out the decorated strip.

6. Remove four fixed screws.

Remove four fixed screws.

7. Pry loose and take out the panel.

Pry loose and take out the panel.

8. Remove four screws of original host.

Remove four screws of original host.

9. Remove two screws of the monitor.

Remove two screws of the monitor.

10. Take out the original monitor.

Take out the original monitor.

11. Connect the original power harness with Android cable.

Connect the original power harness with Android cable.

12. Fixed the plastic cover of Android unit to original dashboard.

Fixed the plastic cover of Android unit to original dashboard.

13. Full test.

Full test.

14. Please put everything into their original place.

By now, do you have a general knowledge about the 2013 2014 2015 2016 2017 2018 BMW 6 Series F06/F12 NBT car radio installation? If you still have any questions that you don’t know how to solve, you can call your supplier to talk with skilled people or ask a professional technician for valuable help. Also, you can directly go to the car radio upgrade center and arrange a professional technician to get your new car radio installed. Anyway, you must choose the best way to install you car radio, so that you can avoid unnecessary damage to your car and car radio. If you are thinking about how to choose an ideal car radio for you beloved car, here I would like to share with you the excellent 2013 2014 2015 2016 2017 2018 BMW 6 Series F06/F12 NBT GPS Navigation Radio from Seicane. Please click for more information:

https://www.seicane.com/hd-touchscreen-gps-navigation-radio-for-2013-2014-2018-bmw-6-series-f06-f12-nbt-android-stereo-usb-bluetooth-support-mirror-link-dvr-s028256k

Designed for the 2013 2014 2015 2016 2017 2018 BMW 6 Series F06 / F12 NBT, this outstanding car radio has a variety of features and can help you enjoy a better driving experience, including 5 point touch screen, 6-core Rockchip PX CPU, GPS, video output, Carplay, etc. Since the unit designed with these entertainment features and practical functions, this remarkable radio can meet almost all your needs. Take the Carplay function as an example. This Carplay USB dongle can support the CARPLAY USB product. Support all Android car DVD products, the original car voice control, the original car screen touch.

Such a fascinating unit, why not buy now?

How to Quickly Install and Upgrade a 2011 2012 BMW 6 Series F06/F12 CIC GPS Navigation Radio

The Global Positioning System (GPS) Navigation Kit guides you through alternative routes in an unfamiliar area and maps and times your journey to a specific destination. GPS navigators can access a network of approximately 30 Earth orbit satellites to pinpoint your latitude and longitude. Then The GPS receiver overwrites the information onto a series of preloaded maps to correctly calculate route information, speed and direction.But now, your factory radio navigator can not satisfy you anymore. More and more people are looking for a new unit and replace it by themselves. But how to replace it by yourself, the following is an instruction on 2011 2012 BMW 6 Series F06/F12 CIC GPS Navigation Radio from Seicane, you can take it as a reference if you have a car which is similar to 2011 2012 BMW 6 Series F06/F12 CIC.

2011 2012 BMW 6 Series F06/F12 CIC GPS Navigation Radio after installation

Something you should know:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2011 2012 BMW 6 Series F06/F12 CIC GPS navigation radio installation guidance

1. Original dashboard.

Original dashboard.

2. Pry loose the right side air outlet.

Pry loose the right side air outlet.

3. Pry loose the left side air outlet.

Pry loose the left side air outlet.

4. Take out the air-conditioning decorated plate.

Take out the air-conditioning decorated plate.

5. Take out the decorated strip.

Take out the decorated strip.

6. Remove four fixed screws.

Remove four fixed screws.

7. Pry loose and take out the panel.

Pry loose and take out the panel.

8. Remove four screws of original host.

Remove four screws of original host.

9. Remove two screws of the monitor.

Remove two screws of the monitor.

10. Take out the original monitor.

Take out the original monitor.

11. Remove the protection panel in the right side of armrest box.

Remove the protection panel in the right side of armrest box.

12. Remove two screws.

Remove two screws.

13. Remove the cover of the gear knob.

Remove the cover of the gear knob.

14. Remove original IDRIVE screws and take out the panel.

Remove original IDRIVE screws and take out the panel.

15. Remove IDRIVE cable, and connect it to Android power harness.

Remove IDRIVE cable, and connect it to Android power harness.

16. Connect the original power harness with Android cable.

Connect the original power harness with Android cable.

17. Fixed the plastic cover of Android unit to original dashboard.

Fixed the plastic cover of Android unit to original dashboard.

18. Full test.

Full test.

By now, do you understand each of the detailed steps in the above installation tips? If you are still not clear, please ask your dealer, skilled friend or professional for help. If you are afraid of any damage to your car or car radio, you can go to the car radio center and get your new car radio installed by a professional technician from your dealer. You must know car radios play an essential role in installation, it is wise to choose the ideal car radio. If you have no idea, i would like to share a remarkable 2011-2012 BMW 6 Series F06/F12 CIC GPS Navigation Radio from Seicane with you, see more details by click the following link:

https://www.seicane.com/polegadas-touchscreen-androide-2011-2012-bmw-6-series-f06-f12-cic-gps-radio-navegac-o-com-usb-wifi-suporte-bluetooth-tpms-dvr-televis-o-digital-s028236k

This powerful car radio has a large 10.25 inch digital multi-touch screen with a resolution of 1280 x 480, allowing you to enjoy the smooth display of movies, video, TV shows, and also a clear view on road.
Also, with wireless Bluetooth function, you have free access to Bluetooth hands-free calling and Bluetooth streaming music while keeping you safe and fun.

The advanced GPS module is specially designed for this device, it allows you to quickly find your location and navigate to any destination you want. What’s more, because of the strong dual zone function of this car radio, you can enjoy live music while navigating.

Why not add this unit into you shopping cart?