Home › 2017 › June

Monthly Archives: June 2017

How to Upgrade a 2008 2009 2010 2011 2012-2014 Mercedes Benz GLK X204 GLK350 GLK320 GLK280 GLK250 GLK220 GLK200 GPS Bluetooth Car Radio Perfectly

Posted on by — 14 Comments ↓ 16,601 views
2008 2009 2010 2011 2012-2014 Mercedes Benz GLK X204 GPS Bluetooth Car Radio after installation

If you want to pursue a more convenient and comfortable in-car life as well as a brand new driving experience, as far as I am concerned, it is the easiest and best way for you to replace  your factory radio with a new multifunctional car radio. The following is a detailed 2008 2009 2010 2011 2012-2014 Mercedes Benz GLK X204 GLK350 GLK320 GLK280 GLK250 GLK220 GLK200 car radio installation guide. If you have the same or similar dashboard, you might as well refer to this guide before you start your installation work.

2008 2009 2010 2011 2012-2014 Mercedes Benz GLK X204 GPS Bluetooth Car Radio after installation
2008 2009 2010 2011 2012-2014 Mercedes Benz GLK X204 GPS Bluetooth Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008 2009 2010 2011 2012-2014 Mercedes Benz GLK X204 GLK350 GLK320 GLK280 GLK250 GLK220 GLK200 car radio installation guide

1. The original car radio.

The original car radio
The original car radio

2. Use a flat removal tool to pry up the air vent.

Use a flat removal tool to pry up the air vent
Use a flat removal tool to pry up the air vent

3. Remove the air vent and disconnect the connector at the back of the air vent.

Remove the air vent and disconnect the connector at the back of the air vent
Remove the air vent and disconnect the connector at the back of the air vent
3-1
3-1

4. Use the flat removal tool to pry the screen panel.

Use the flat removal tool to pry the screen panel
Use the flat removal tool to pry the screen panel
4-1
4-1

5. Use a screwdriver to remove screws that are holding teh screen.

Use a screwdriver to remove screws that are holding teh screen
Use a screwdriver to remove screws that are holding teh screen
5-1
5-1

6. Pry the car radio panel.

Pry the car radio panel
Pry the car radio panel

7. Remove the screws that are holding the car radio.

Remove the screws that are holding the car radio
Remove the screws that are holding the car radio
7-1
7-1

8. Use a removal tool to help you remove the original car radio.

Use a removal tool to help you remove the original car radio
Use a removal tool to help you remove the original car radio

9. Take the original car radio out from the dashboard.

Take the original car radio out from the dashboard
Take the original car radio out from the dashboard

10. Disconnect the connectors and cables at the back of the original car radio.

Disconnect the connectors and cables at the back of the original car radio
Disconnect the connectors and cables at the back of the original car radio

11. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

12. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

13. Connect the Seicane car radio to your original car radio’s plugs.

14. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

15. If the new Seicane car radio works well, put it into the dash.

16. Put everything into their original place, and all the installation is done.

 

It is normal if you encounter any problems during the installation process. In that case, it is suggested that you should contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly go to a car radio upgrade center to ask a professional to help you install the new car radio.

Besides, it is essential for you to pick an ideal car radio for your beloved car. If you don’t know what kind of car radios can fit your car, I’d like to introduce an amazing 2008 2009 2010 2011 2012-2014 Mercedes Benz GLK X204 GLK350 GLK320 GLK280 GLK250 GLK220 GLK200 car radio from Seicane to you. For more details, please click:

https://www.seicane.com/oem-2008-2009-2010-mercedes-benz-glk350-glk320-glk280-glk250-glk220-glk200-android-radio-gps-navigation-dvd-with-touchscreen-bluetooth-wifi-obd2-mirror-link-s32708

This car radio can enhance it capacity, improve its performance and facilitate its operation since it is upgraded to run on the stable Android 6.0 operation system and a high-quality 8 – Core 1.5 GHz RK-PX5 A53 processor.

Both your car interior environment and driving experience can be greatly improved thanks to these features supported by this unit, mainly including the high-end 3D GPS navigation function, FM/AM radio, DVD player, Bluetooth hands-free call, Bluetooth streaming music, AUX, USB/ SD connection, etc.

Even though you don’t have a good sense of directions, you can depend on the 3D GPS navigation system of high accuracy to locate where you are and find the right way to reach your desired destinations through turn-by-turn directions and voice prompts. Additionally, this unit’s dual zone function enables you to listen to your favorite music while navigating.

Wish you enjoy your driving accompanied by this unit. Good luck to you!

How to Install a 2006 2007 2008 2009 2010-2011 Honda Civic Car Stereo Audio with Bluetooth GPS Navigation System

Posted on by — 4 Comments ↓ 10,054 views
2006 2007 2008 2009 2010-2011 Honda Civic Car Stereo Audio after installation

There is no denying that with a remarkable car stereo installed in your car, your in-car life can be taken up a notch. Therefore, more and more car owners are trying to replace their factory radio with a new aftermarket car stereo so as to get access to a lot of upgraded and brand new features. Today I would like to share a detailed 2006 2007 2008 2009 2010-2011 Honda Civic car stereo installation instruction from Seicane with you. If you also own a 2006 2007 2008 2009 2010-2011 Honda Civic, you might as well read the following instruction carefully.

2006 2007 2008 2009 2010-2011 Honda Civic Car Stereo Audio after installation
2006 2007 2008 2009 2010-2011 Honda Civic Car Stereo Audio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006 2007 2008 2009 2010-2011 Honda Civic car stereo installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Pry the cover of the slot below the CD player with a lever and remove it.

Pry the cover of the slot below the CD player with a lever and remove it
Pry the cover of the slot below the CD player with a lever and remove it

3. Remove two screws inside the slot with a ninety-degree screwdriver.

Remove two screws inside the slot with a ninety-degree screwdriver
Remove two screws inside the slot with a ninety-degree screwdriver

4. Pry the lower panel with a lever, loosen it with your hands at the same time, after that, remove the panel.

Pry the lower panel with a lever, loosen it with your hands at the same time, after that, remove the panel
Pry the lower panel with a lever, loosen it with your hands at the same time, after that, remove the panel

5. Remove one screw in the dash.

Remove one screw in the dash
Remove one screw in the dash

6. Remove the vent panel.

Remove the vent panel
Remove the vent panel

7. Unplug the connectors beneath the panel.

Unplug the connectors beneath the panel
Unplug the connectors beneath the panel

8. Pry the edges along the panel of the original radio, then remove it, after that, take the original car radio out of the dash.

Pry the edges along the panel of the original radio, then remove it, after that, take the original car radio out of the dash
Pry the edges along the panel of the original radio, then remove it, after that, take the original car radio out of the dash

9. Unplug the connectors at the back of the original radio.

Unplug the connectors at the back of the original radio
Unplug the connectors at the back of the original radio
9-1
9-1

10. Disconnect the antenna and the other connector on the other side of the original radio.

Disconnect the antenna and the other connector on the other side of the original radio
Disconnect the antenna and the other connector on the other side of the original radio
10-1
10-1

11. Check all the accessories for the new Seicane car stereo.

12. Connect the harnesses to the back of the new Seicane car stereo.

13. Connect the Seicane car stereo to your original car radio’s plugs.

14. Put the new Seicane car stereo into the dash.

15. Turn on the new Seicane car stereo and check whether the unit is working properly.

 

Wish the above installation instruction can do you some help. If you have any doubts, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. Or for avoiding damage to either your car stereo or your car, you’d better go to a car stereo upgrade center to ask a technician to help you install the new car stereo.

Anyway, before installation, please make sure you’ve had an ideal car stereo. If not, I’d like to recommend an excellent 2006 2007 2008 2009 2010-2011 Honda Civic car stereo from Seicane to you. For more details, please click:

https://www.seicane.com/2006-2011-honda-civic-android-radio-gps-navigation-with-hd-touchscreen-mirror-link-bluetooth-obd2-dvr-rearview-camera-steering-wheel-control-wifi-1080p-s32710

Loaded with the stable Android 6.0 operation system and a powerful 8-core 1.5 GHz RK-PX5 A53 processor, this car stereo can be regarded as the best replacement for your factory radio because of its enhanced and improved capacity and performance.

The built-in GPS navigation system of this car stereo makes it easier for you to locate where you are and find the right way to reach your desired destinations through turn-by-turn direction and voice prompts. Besides, while navigating, you can also enjoy your favorite music thanks to this unit’s dual zone function.

Besides, through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can dial, answer, reject and mute hands-free calls as well as listen to your favorite music streaming from your phone music playlists, which add both convenience and enjoyment to your in-car life.

Wish you enjoy your driving experience accompanied by this car stereo. Good luck to you!

A Detailed Instruction on a 2006 2007 2008 2009 2010 2011 2012 Toyota Rav4 GPS Bluetooth DVD Car Radio Upgrade

Posted on by — 6 Comments ↓ 6,858 views
2006 2007 2008 2009 2010 2011 2012 Toyota Rav4 GPS Bluetooth DVD Car Radio after installation

The steady technology development makes it possible for people to enjoy the latest and the most advanced features with a certain amount of money. Nowadays, to have an ideal in-car environment and enjoy more convenience, more and more car owners choose to replace their factory radio with new multifunctional car radios. This article will introduce a 2006 2007 2008 2009 2010 2011 2012 Toyota Rav4 car radio installation instruction from Seicane. If you own the same car model, you can refer to this instruction carefully to help with your installation in the future.

2006 2007 2008 2009 2010 2011 2012 Toyota Rav4 GPS Bluetooth DVD Car Radio after installation
2006 2007 2008 2009 2010 2011 2012 Toyota Rav4 GPS Bluetooth DVD Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2009 2010 2011 2012 Toyota Rav4 car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Remove the panel by using plastic removal tool.

Remove the panel by using plastic removal tool
Remove the panel by using plastic removal tool

3. Unplug the hazard warning lights.

Unplug the hazard warning lights
Unplug the hazard warning lights

4. Remove the left panel and unplug the switch.

Remove the left panel and unplug the switch
Remove the left panel and unplug the switch

5. Unplug the switch.

Unplug the switch
Unplug the switch

6. Remove four screws.

Remove four screws
Remove four screws
6-1
6-1 a. Position for screws.

7. Pull out the factory radio.

Pull out the factory radio
Pull out the factory radio

8. The back of the original car radio.

The back of the original car radio
The back of the original car radio

9. Remove 8 screws from original car radio.

Remove 8 screws from original car radio
Remove 8 screws from original car radio
9-1
9-1

10. Remove 2 screws at the top of the new radio.

Remove 2 screws at the top of the new radio
Remove 2 screws at the top of the new radio
10-1
10-1

11. Install 8 screws to new car radio.

Install 8 screws to new car radio
Install 8 screws to new car radio

12. Plug into factory plugs.

Plug into factory plugs
Plug into factory plugs

13. All plugs after connection.

All plugs after connection
All plugs after connection
13-1
13-1

14. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

15. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

16. Connect the Seicane car radio to your original car radio ‘s plugs.

17. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

18. If the new Seicane car radio works well, put it into the dash.

19. Put everything into their original place, and all the installation is done.

 

Wish the above installation instruction can be helpful for you. If you have any doubts, just don’t hesitate to consult your dealer, communicate with someone experienced or turn to a professional for help. If you still think the installation process is too complicated for you to finish by yourself, you can also straightly go to a car radio upgrade center and ask a technician to help you install the new car radio. Moreover, if you are still looking for a suitable car radio but don’t know what kind of car radios can fit your car well, you might as well check out the following link which is a 2006 2007 2008 2009 2010 2011 2012 Toyota Rav4 car radio from Seicane.

https://www.seicane.com/hd-touchscreen-2006-2012-toyota-rav4-android-radio-dvd-gps-navigation-system-bluetooth-obd2-dvr-rearview-camera-1080p-steering-wheel-control-3g-wifi-s32790

Based on the stable Android 6.0 operation system, a powerful 8-core 1.5 GHz RK-PX5 A53 processor and 32 GB INand Flash as well as 2GB RAM, this car radio can provide its users with higher capacities and better performance.

When you are traveling around an unfamiliar place, even you have no good sense of directions, you can turn on the GPS function to find the right way to reach your destinations. Thanks to the high-accuracy 3D GPS navigation system, you are able to accurately arrive at your destinations by getting access to a lot of features, including landmark building display, 3D street view, destination search, turn-by-turn voice directions, etc. And thanks to dual zone function, you can freely enjoy your favorite music from radio/AV/DVD/TV etc under GPS mode.

If you like this car radio, just add it to your shopping cart. Good luck to you!

How to Upgrade a 2015 Ford focus Car Radio with GPS Bluetooth DVD Player in a Proper Way

Posted on by — 6 Comments ↓ 6,194 views

Having a comfortable in-car environment and great enjoyment is what most car owners want to pursue while they are driving cars on all trips. And now an intelligent car radio can help realize this goal. As a matter of fact, to install a new car radio is not a difficult thing for you with some related installation experience and a correct guide. The following is a 2015 Ford focus car radio installation instruction from Seicane. If you also have the same or similar dashboard, you can follow this instruction step by step.

2015 Ford focus Car Radio after installation
2015 Ford focus Car Radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2015 Ford focus car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Remove one bar under the radio with a plastic removal tool.

Remove one bar under the radio with a plastic removal tool
Remove one bar under the radio with a plastic removal tool
2-1
2-1

3. Remove two screws that fixed the trim panel.

Remove two screws that fixed the trim panel
Remove two screws that fixed the trim panel
3-1
3-1

4. Gently take out the trim panel.

Gently take out the trim panel
Gently take out the trim panel
4-1
4-1

5. Remove screws fixed the radio.

Remove screws fixed the radio
Remove screws fixed the radio

6. Pull out the original car radio.

Pull out the original car radio
Pull out the original car radio

7. Unplug the connectors at the back of the car radio.

Unplug the connectors at the back of the car radio
Unplug the connectors at the back of the car radio

8. Check all the accessories for the new Seicane car radio.

9. Connect the harnesses to the back of the new Seicane car radio.

10. Connect the Seicane car radio to your original stereo’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place. All the installation is done.

 

Before the installation, please confirm that you’ve made clear every detailed step. If not, please don’t hesitate to consult your dealer for seeking advice or turn to a professional for help. Or during the installation, you can ask someone experienced to help you alongside. If you still think it hard to install the new car radio by yourself, you’d better arrange a technician to help install the car radio.

Besides, to help you select an ideal car radio, you can refer to a great 2015 Ford focus car radio from Seicane. Here comes the related link, please click:

https://www.seicane.com/2015-ford-focus-bluetooth-android-radio-dvd-gps-navigation-with-touchscreen-mirror-link-obd2-dvr-rearview-camera-1080p-3g-wifi-steering-wheel-control-s32556

Integrated with a wide range of practical and entertainment features, this modern multifunctional car radio will become an ideal replacement for your factory radio in 2015 Ford focus.

With the assistance of the high-end GPS navigation system, you won’t get lost even you are in a totally unfamiliar place. According to features, including current location, speed, mileage, landmark building display, 3D street view, destination search and turn-by-turn voice directions, you can be accurately guided to anywhere you would like to go.

Under the wireless Bluetooth connectivity, you can pair your Bluetooth-enabled mobile phone with this unit so as to dial, answer, reject and mute hands-free calls as well as enjoy your favorite music streaming from your phone playlists without taking your hands off the steering wheel. So you get great convenience and enjoyment.

If you like this car radio, just add this unit to your shopping cart. Wish you have a brand new driving experience accompanied by it. Good luck to you!

The Effective Way on Replacing a 2000 2001 2002 2003 2004-2011 Mercedes BENZ SLK Class SLK200 SLK280 SLK350 SLK55 GPS Bluetooth DVD Car Radio

Posted on by — 9 Comments ↓ 6,136 views
2000 2001 2002 2003 2004-2011 Mercedes BENZ SLK Class SLK200 SLK280 SLK350 SLK55 GPS Bluetooth DVD Car Radio after installation

As you know, an ideal car stereo can provide you with great convenience and enjoyment for car owners all the way. And thanks to special wiring harness, actually the installation of a car stereo is not complicated. Therefore, with some related installation experience and a correct installation guide, you can also easily finish the whole installation by yourself. This article aims to introduce a step-by-step 2000 2001 2002 2003 2004-2011 Mercedes BENZ SLK Class SLK200 SLK280 SLK350 SLK55 car radio installation instruction from Seicane to you. You may take it as a reference if you have the same or similar dashboard.

2000 2001 2002 2003 2004-2011 Mercedes BENZ SLK Class SLK200 SLK280 SLK350 SLK55 GPS Bluetooth DVD Car Radio after installation
2000 2001 2002 2003 2004-2011 Mercedes BENZ SLK Class SLK200 SLK280 SLK350 SLK55 GPS Bluetooth DVD Car Radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2000 2001 2002 2003 2004-2011 Mercedes BENZ SLK Class SLK200 SLK280 SLK350 SLK55 car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Push inwards adn remove one T20 screw with a screwdriver.

Push inwards adn remove one T20 screw with a screwdriver
Push inwards adn remove one T20 screw with a screwdriver
2-1
2-1

3. Remove the cover around the cigarette lighter and then unscrew another T20 screw.

Remove the cover around the cigarette lighter and then unscrew another T20 screw
Remove the cover around the cigarette lighter and then unscrew another T20 screw
3-1
3-1
3-2
3-2

4. Lift up the shift boot, unplug the connectors at the back and put it aside.

Lift up the shift boot, unplug the connectors at the back and put it aside
Lift up the shift boot, unplug the connectors at the back and put it aside
4-1
4-1
4-2
4-2
4-3
4-3

5. Pull out the cigarette lighter and remove the connectors behind.

Pull out the cigarette lighter and remove the connectors behind
Pull out the cigarette lighter and remove the connectors behind
5-1
5-1

6. Remove the AC control and disconnect connectors.

Remove the AC control and disconnect connectors
Remove the AC control and disconnect connectors
6-1
6-1

7. Unscrew a set of screws, remove and unplug the connectors at the back.

Unscrew a set of screws, remove and unplug the connectors at the back
Unscrew a set of screws, remove and unplug the connectors at the back
7-1
7-1
7-2
7-2
7-3
7-3

8. Remove bottom screws that are holding the radio on the dashboard.

Remove bottom screws that are holding the radio on the dashboard
Remove bottom screws that are holding the radio on the dashboard

9. Unscrew top screws and remove the cover.

Unscrew top screws and remove the cover
Unscrew top screws and remove the cover
9-1
9-1
9-2
9-2

10. Remove another two screws that hold the radio.

Remove another two screws that hold the radio
Remove another two screws that hold the radio

11. Remove the original car radio and then disconnect the connectors behind.

Remove the original car radio and then disconnect the connectors behind
Remove the original car radio and then disconnect the connectors behind

12. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

13. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

14. Connect the Seicane car radio to your original stereo’s plugs.

15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16. Put the new Seicane car radio into the dash.

17. Put everything into their original place. All the installation is done.

 

Wish the above installation steps can be helpful for you. Whether you have any doubts about your car radio or your car, you can seek help from your dealer, someone experienced or a professional. To avoid making damage to either your car radio or your car, you can straightly arrange a professional technician to help install the new car radio. While for selecting an ideal car radio, if you have no ideas, I’d like to share an amazing 2000 2001 2002 2003 2004-2011 Mercedes BENZ SLK Class SLK200 SLK280 SLK350 SLK55  car radio from Seicane with you.

https://www.seicane.com/touchscreen-radio-dvd-player-gps-navigation-system-for-2000-2011-mercedes-benz-slk-slk200-slk280-slk-350-slk55-with-bluetooth-wifi-steering-wheel-control-backup-camera-dvr-obd2-s32576

This car radio’s operation system has been upgraded to the advanced Android 6.0 version and it is featured with a powerful 8-core 1.5 GHz RK-PX5 A53 processor. Besides, it comes with a lot of practical and entertainment features to meet your different needs in your car, so it can be regarded as the best replacement for your factory radio.

With this car radio installed in your car, you must be surprised by comprehensive features, including 3D GPS navigation system, DVD player, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, AUX, file management, steering wheel control, USB/SD card connection, etc.

By making full use of this unit’s 3DGPS function, you can get a lot of help. Under the assistance of the worldwide real-time GPS navigation system, you can easily and quickly know your current locations and accurately guide to your desired destinations according to turn-by-turn directions and voice prompts. Additionally, you can also freely enjoy your favorite music while navigating thanks to this car radio’s dual zone function.

Wish you enjoy your driving accompanied by this all-in-one car radio. Good luck!

How to Upgrade a 2005 2006 2007 2008 2009-2011 Seat Leon GPS Bluetooth Car Radio Effortlessly

Posted on by — No Comments ↓ 3,038 views
2005 2006 2007 2008 2009-2011 Seat Leon GPS Bluetooth Car Radio after installation

For most car owners who want to have a wonderful driving experience, they must want everything in their cars is upgraded enough to meet all their needs in car. In that case, they can replace their factory radio with a new aftermarket car radio. And actually, it is quite easy to install a new car radio. If you also want to replace your factory radio, you can find a detailed installation guide to help you. This article aims to introduce a detailed 2005 2006 2007 2008 2009-2011 Seat Leon car radio installation guide from Seicane. Wish you can get some help from it.

2005 2006 2007 2008 2009-2011 Seat Leon GPS Bluetooth Car Radio after installation
2005 2006 2007 2008 2009-2011 Seat Leon GPS Bluetooth Car Radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005 2006 2007 2008 2009-2011 Seat Leon car radio installation guide

1. Remove the top panel with a lever.

Remove the top panel with a lever
Remove the top panel with a lever

2. Disconnect the connector at the back of the panel.

Disconnect the connector at the back of the panel
Disconnect the connector at the back of the panel

3. Unscrew the screw with a screwdriver.

Unscrew the screw with a screwdriver
Unscrew the screw with a screwdriver

4. Remove the metal sheet on the top with your hands.

Remove the metal sheet on the top with your hands
Remove the metal sheet on the top with your hands

5. Unscrew two screws circled in red shown as follows under the metal sheet.

Unscrew two screws circled in red shown as follows under the metal sheet
Unscrew two screws circled in red shown as follows under the metal sheet

6. Remove the air conditioner vent with your hands.

Remove the air conditioner vent with your hands
Remove the air conditioner vent with your hands

7. Unscrew two screws under the vent with a screwdriver.

Unscrew two screws under the vent with a screwdriver
Unscrew two screws under the vent with a screwdriver

8. Remove the panel on the original car radio.

Remove the panel on the original car radio
Remove the panel on the original car radio

9. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver
Unscrew four screws holding the original car radio with a screwdriver

10. Take the original car radio out of the dash.

Take the original car radio out of the dash
Take the original car radio out of the dash

11. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio
Disconnect all the connectors at the back of the original car radio

12. Check all the accessories for the new Seicane car radio.

13. Connect the harnesses to the back of the new Seicane car radio.

14. Connect the Seicane car radio to your original car radio’s plugs.

15. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

16. Put the new Seicane car radio into the dash.

17. Put everything into their original place.

 

Wish the above installation steps can be helpful for you to some degree. If you have some problems you cannot deal with independently, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can straightly have the new car radio installed by a professional technician. Whatever is your plan, first of all, it is essential for you to pick an ideal car radio. If you have no idea, you can check out the following link which is a fabulous 2005 2006 2007 2008 2009-2011 Seat Leon car radio from Seicane.

https://www.seicane.com/android-2005-2011-seat-leon-gps-dvd-player-in-dash-radio-system-with-hd-touch-screen-bluetooth-3g-wifi-mirror-link-obd2-dvr-backup-camera-s129698e

This car radio is based on the stable Android 6.0 operation system, a high-quality 8-core 1.5 GHz RK-PX5 A53 processor and 32GB INand flash as well as 2GB RAM to provide you with the best services.

You are going to enjoy both great convenience and enjoyment since this car radio comes with a lot of features, mainly including 3D GPS navigation system, Bluetooth hands-free calls, Bluetooth streaming music, FM/AM radio, file management, AUX, steering wheel, etc.

According to turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you are able to easily locate where you are and gain the best route option to arrive at your destinations accurately.

Besides, under the wireless Bluetooth technology, both hands-free calls and streaming music are both available for you as long as you pair your Bluetooth-enabled mobile phone with this smart car radio. By doing so, you can enjoy a convenient and pleasant driving experience.

Please don’t forget to add this car radio to your shopping cart if you like it. Good luck!