Professional 9 steps to install a 2002 2003-2007 Dodge Dakota P/U radio with Bluetooth Music IPOD MP3 AUX Backup Camera Dual Zone

2002 2003-2007 Dodge Dakota P U radio after installation

To remove an old factory radio and install a new one is just a job which takes about half an hour. It’ s not too difficult especially when you find the detailed installation instruction specially for your car. If you are a car owner of 2002 2003-2007 Dodge Dakota P/U and are looking for the removal and installation guide for your car, then this article about the 2002 2003-2007 Dodge Dakota P/U radio installation instruction from Seicane is worth your careful reading.

2002 2003-2007 Dodge Dakota P U radio after installation
2002 2003-2007 Dodge Dakota P U radio after installation

 

 

Tips about the installation:

 

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

  1. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2002 2003-2007 Dodge Dakota P/U radio installation guide

 

1.Loosen the trim panel with a lever.

1.Loosen the trim panel with a lever
1.Loosen the trim panel with a lever

 

2.Take the panel off the dash and disconnect the wires from the car.

2-1.Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car.
2-2.Take the panel off the dash and disconnect the wires from the car.
2-2.Take the panel off the dash and disconnect the wires from the car.

 

3.Remove the four screws which are holding the original radio with a screwdriver.

3.Remove the four screws which are holding the unit with a screwdriver.
3.Remove the four screws which are holding the unit with a screwdriver.

 

4.Take out the original radio and disconnect the wire harness at the back of the original radio.

4-1.Take out the unit and disconnect the wire harness at the back of the unit.
4-1.Take out the unit and disconnect the wire harness at the back of the unit.
4-2.Take out the unit and disconnect the wire harness at the back of the unit.
4-2.Take out the unit and disconnect the wire harness at the back of the unit.

 

5.Check all the accessories for the new Seicane radio.

5.Check all the accessories for the new Seicane car radio.
5.Check all the accessories for the new Seicane car radio.

 

6.Connect the Seicane radio to your original car radio ‘s plugs.

6-1. Connect the Seicane car stereo to your original car radio 's plugs.
6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.
6-2. Connect the Seicane car stereo to your original car radio 's plugs.
6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.
6-3. Connect the Seicane car stereo to your original car radio 's plugs.
6-3. Connect the Seicane car stereo to your original car radio ‘s plugs.

 

7.Put the new Seicane radio into the dash.

7.Put the new Seicane stereo into the dash.
7.Put the new Seicane stereo into the dash.

 

8.Turn on the new radio and have a test if the new Seicane radio is working without problem..

9.Put trim panel back on your new Seicane radio after the normal test.

 

Can you understand all the steps above for the 2002 2003-2007 Dodge Dakota P/U radio installation? If not, it’s suggested you consult your dealer. Please make clear every step before the installation. You can also have your new radio installed by a professional.

Besides, a fitting car radio is needed for a successful upgrade. If you don’t have one, you can refer to this amazing 2002 2003-2007 Dodge Dakota P/U radio from Seicane, which is an ideal car radio with many features for you to upgrade your factory radio. For more details, please click:

 

http://www.seicane.com/top-2002-2007-dodge-dakota-p-u-durango-touch-screen-gps-radio-stereo-cd-dvd-player-bluetooth-music-ipod-iphone-mp3-aux-backup-camera-dual-zone-t6015

 

This modern 2002 2003-2007 Dodge Dakota P/U radio is based on WinCE 6.0 operation system, and comes with a 1GHz Cortex A9 MStar 785 CPU for you to improve the performance. The latest GPS navigation system is built for you to get access to the worldwide real-time traffic information to reach your destination smoothly and punctually. Besides, you can also utilize the bluetooth feature for hands-free calls and audio streaming to keep safe and relaxed on the way.

 

To relax on all your trips, this top 2002 2003-2007 Dodge Dakota P/U radio can be your perfect road companion. Just take it and go right now!

2 comments on “Professional 9 steps to install a 2002 2003-2007 Dodge Dakota P/U radio with Bluetooth Music IPOD MP3 AUX Backup Camera Dual Zone

Leave a Reply

Your email address will not be published. Required fields are marked *