How to Install a 2007 2008 2009 2010-2013 Honda Fit Car Stereo to Fix Radio Problems in an Effective Way

2007 2008 2009 2010-2013 Honda Fit Car Stereo after installation

If you are not satisfied with your factory radio since it cannot be compatible with some modern or upgraded features, it is suggested that you can replace your factory radio with a new aftermarket car radio. If you wonder how to install a 2007 2008 2009 2010-2013 Honda Fit car radio, then you can carefully read the following installation instruction on a 2007 2008 2009 2010-2013 Honda Fit car radio. Wish it is helpful for you.

2007 2008 2009 2010-2013 Honda Fit Car Stereo after installation
2007 2008 2009 2010-2013 Honda Fit Car Stereo after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2007 2008 2009 2010-2013 Honda Fit car radio installation instruction

1. Open the glove box at first.

Open the glove box at first
Open the glove box at first

2. Remove the four screws of gloves box as these pictures show.

Remove the four screws of gloves box as these pictures show
Remove the four screws of gloves box as these pictures show
2-2
2-2
2-3
2-3
2-4
2-4

3. Unscrew the two bolts under the radio.

Unscrew the two bolts under the radio
Unscrew the two bolts under the radio
3-2
3-2

4. Take out the original car radio.

Take out the original car radio
Take out the original car radio

5. Remove the original car radio.

Remove the original car radio
Remove the original car radio

6. Disconnect all connectors at the back of the original car radio.

Disconnect all connectors at the back of the original car radio
Disconnect all connectors at the back of the original car radio

7. Remove screws of air condition as these pictures show.

Remove screws of air condition as these pictures show
Remove screws of air condition as these pictures show
7-2
7-2
7-3
7-3
7-4
7-4
7-5
7-5

8. Pull out the air outlet of air condition.

Pull out the air outlet of air condition
Pull out the air outlet of air condition

9. Remove the hazard warning switch light.

Remove the hazard warning switch light
Remove the hazard warning switch light

10. Install the air outlet with the unit.

11. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

12. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

13. Connect the Seicane car radio to your original car radio’s plugs.

14. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

15. Put the new Seicane radio into the dash.

16. Put everything into their original place. All the installation is done.

 

If you have any doubts, please feel free to consult your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard to finish the whole installation process, you’d better arrange a professional technician to help you install the new car radio straightly. Besides, if you don’t know how to select a suitable car stereo for your car, I’d like to recommend an amazing 2007 2008 2009 2010-2013 Honda Fit car radio from Seicane to you. For more details, please click:

https://www.seicane.com/2007-2008-2009-2013-honda-fit-android-hd-touchscreen-gps-navigation-system-with-bluetooth-wifi-mirror-link-steering-wheel-control-s0402

This powerful car radio is running on the stable Android 6.1 operation system and high-quality quad-core CPU processor.

Even though you are not good at identifying directions, the high-accuracy 3D GPS navigation system is specially built in to offer you some help. With the help of the worldwide real-time navigation, you can get access to features like current location, 3D street view, landmark building display, turn-by-turn voice directions, etc. So you can be accurately guided to arrive at your desired destinations.

Additionally, under the wireless Bluetooth technology, without taking your hands off the steering wheel, both Bluetooth hands-free phone calls and Bluetooth streaming music are available as long as you pair your Bluetooth-enabled mobile phone with this unit.

Wish you like this multifunctional car radio and good luck to you!

6 comments on “How to Install a 2007 2008 2009 2010-2013 Honda Fit Car Stereo to Fix Radio Problems in an Effective Way

Leave a Reply

Your email address will not be published. Required fields are marked *