When traveling around an unfamiliar city, you can turn on your car radio with GPS function to navigate you to your desired destinations and make full use of its entertainment features to relax both yourself and your passengers. However, if your original car radio is not up-to-date enough to be compatible with so many advanced features, it is suggested that you should replace your factory radio with a new aftermarket car radio. Here I would like to share an easy installation instruction on a 2007 2008 2009 2010 2011-2013 Honda Fit car radio from Seicane with you. If you have the same or similar dashboard, you can take it as reference.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts (Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2007 2008 2009 2010 2011-2013 Honda Fit car radio installation instruction
1. Open the glove box at first.
2. Remove the four screws of gloves box as these pictures show.
3. Unscrew the two bolts under the radio.
4. Take out the original car radio.
5. Remove the original car radio.
6. Disconnect all connectors at the back of the original car radio.
7. Remove screws of air condition as these pictures show.
8. Pull out the air outlet of air condition.
9. Remove the hazard warning switch light.
10. Install the air outlet with the unit.
11. Check all the accessories for the new Seicane car radio.
12. Connect the harnesses to the back of the new Seicane car radio.
13. Connect the Seicane car radio to your original car radio’s plugs.
14. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
15. Put the new Seicane radio into the dash.
16. Put everything into their original place. All the installation is done.
That’s the whole process about the removal and installation of a 2007 2008 2009 2010 2011-2013 Honda Fit car radio. If you have any questions, please fee free to browse some professional websites, contact your dealer or turn to a professional for help. Or you can directly ask a technician to help you install the new car radio. Anyway, it is necessary for you to select an ideal car radio first of all. If you don’t know how to pick a car radio that can work well with your car, here I’d like to recommend an excellent 2007 2008 2009 2010 2011-2013 Honda Fit car radio from Seicane to you. For more details, please click:
This car radio with a large 10.1 inch multi-touch screen is running on the advanced Android 6.0 operation system and a powerful CPU processor, so this car radio can operate more stably and faster than your original car radio.
With the assistance of the high-accuracy GPS navigation system, you can easily know your current location and plan the most suitable route to arrive at your destinations through turn-by-turn directions and voice prompts. While navigating, you can make use of this unit’s dual zone function to play your favorite music, which won’t have any negative influence on GPS function.
Besides, through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone with this car radio, you can get access to both Bluetooth hands-free calls and streaming music with keeping your hands on the steering wheel and your eyes on the road ahead. Thus, you can enjoy the great convenience and enjoyment brought by GPS function.
Wish you like this unit and good luck to you!