How to replace and upgrade 2008-2012 Ford Mustang F150 Car Stereos by 10 steps?

With the improvement of people’s life, more and more people choose to upgrade their factory audio system as it can make their driving experience more enjoyable. Therefore the replacement of car touch screen has been the first daunting task for them. And if you own 2009 Ford Mustang F150, the following steps of upgrading 2008-2012 Ford Mustang F150 Car stereos may take an important role in your impressive installation. And as long as you read it with enough patience, you will learn the whole DIY installation procedure in an easy way.

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever or a screwdriver before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

2008-2012 Ford Mustang F150 Radio Installation Instruction

Step 1.Remove two screws on the center console and pull up the the rectangular trim piece around the shifter

Step 2.Pull the center console up and Remove two Phillips screws from arm rest console

Step 3.Remove plastic trim around shifter and the center trim.

Step 4.Remove stereo side panels and six screws.

Step 5.use your finger to disconnect the HVAC connector on both sides of passenger and the driver

Step 6.Remove trim and disconnect connectors.

Step 7.Remove four 7mm screws and Disconnect connectors from the back of the stereo.

Step 8.Connect connectors in their proper slots.

Step 9.Tighten the six screws around the stereo and install two side panels around the stereo.

Step 10.Install center plastic trim, shifter trim, and tighten two Phillips screws on center console.

Hope you can benefit from the above steps and have an overview about how to install your own stereos. If you meet any troubles during this process, you should seek help from your dealer or some experienced technician. Remember to check whether all the functions of stereos can be used in this way. If you still have some doubts during this process, you can contact us by Seicane.com, recently it has new release product of 2008-2012 Ford Mustang F150 Radio, which will give you more entertainment about driving time.

If you like to listen to radios, it’s the best choice for you. This head unit integrated with high-sensitive radio IC with good reception, which can support worldwide analog radio channels reception. While the RDS standard includes some European countries where with RDS radio signal.

Besides, It looks great and it sounds great exactly. If you have any question about this receiver, please don’t hesitate to get in touch with us. And if you want to know more details about it , feel free to post and right here in the comments on our relevant site.

2 comments on “How to replace and upgrade 2008-2012 Ford Mustang F150 Car Stereos by 10 steps?

  1. Can i take radio headunit from a 2018 Ford mustang and install it in a 2010 F150.
    Will the unit fit & sync in the f150

    • “Dear,
      This is Seicane.com.
      Thanks for interested in our product.
      Could you please send us the photo of your car’s dashboard to [email protected]?  
      And could you please tell us the model and year of your car?
      Then we can help you check if this unit can fit your car or not ,hope you could cooperate with us.
      Looking forward to hearing from you soon.
      Thank you & Best regards!

Leave a Reply

Your email address will not be published. Required fields are marked *