Easy Guide for a 2016 Jeep Renegade Bluetooth GPS Car Radio Upgrade

When considering enhancing your car’s capabilities, as far as I am concerned, the easiest an most popular way you can adopt is to upgrade your factory radio. An ideal car radio can only improve your car interior environment but also bring a lot of convenience and enjoyment for your. The following is a 2016 Jeep Renegade car radio installation guide from Seicane. If you also have the same or similar dashboard, then you can read the following guide to help install your new car radio in your car.

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2016 Jeep Renegade car radio installation guide

1. Start by removing the car radio trim panel using a flat pry tool.

2. Use a screwdriver to remove screws that are holding the radio on the dashboard.

3. Gently pull the original radio out from the dash.

4. Disconnect all the connectors and cables at the back of the radio.

5. Check all the accessories for the new Seicane car radio.

6. Connect the harnesses to the back of the new Seicane car radio.

7. Connect the Seicane car radio to your original radio’s plugs.

8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car radio into the dash.

10. Put everything into their original place. All the installation is done.

 

After reading the above installation guide, if you have any doubts about the wiring, you can contact your dealer for seeking a wiring diagram. Or you can turn to a professional for help. If you still think it hard for you to finish the whole upgrade process by yourself, you’d better directly go to a car radio upgrade center and ask a professional to help you install the new car radio.

Since an ideal car radio matters a lot in installation, if you don’t know how to select a suitable car radio for your beloved car, I’d like to share an amazing 2016 Jeep Renegade car radio from Seicane with you. For more details, please click:

https://www.seicane.com/2016-jeep-renegade-touchscreen-android-radio-gps-navigation-system-with-usb-bluetooth-wifi-1080p-aux-mirror-link-steering-wheel-control-s04131

This car radio can be regarded as one of your best choices to replace your factory radio. Loaded with the advanced and stable Android 6.0 operation system and equipped with a powerful quad-core CPU processor, this car radio enables you to embrace much smoother and faster operation experience than ever before.

Under the guidance of turn-by-turn direction and voice prompts provided by the high-end 3D GPS navigation system, you will have difficulty in knowing your current locations and navigating to your desired destinations. Additionally, while navigating, you can freely listen to music thanks to this unit’s dual zone function. And the music will automatically switch to GPS voice.

While for entertainment features, you can watch fantastic videos, TV programs and movies, etc through this large 9 inch HD 1024*600 multi-touch screen. It will show you wonderful display effect and enable you to have a good view of the road ahead.

If you like this car radio, just remember to add it to your shopping cart. Good luck to you!