Nowadays, ideal car stereos are becoming more available for car owners. But you still need to pay extra money for its installation if you don’t know how to install it. However, if you have a correct guide as well as some related experience, you can finish the installation on your own which can save you a lot of money. This passage is about the installation for a multifunctional Seicane 2013 2014 2015 Honda Accord 9 2.0L Car Stereo. If you own the same dashboard, you can refer to the following detailed instruction.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2013 2014 2015 Honda Accord 9 2.0L Car Stereo installation instruction
1. Use a plastic removal tool to remove the side panels.
2. Remove two screws that fix the pocket.
3. Remove the pocket.
4. Use a plastic removal tool to release the panel to the left of the radio.
5. Use the plastic removal tool to pry the top tray and remove it.
6. There are two top screws and two bottom screws that are holding the radio, remove them with a screwdriver.
7. Pull out the original radio and disconnect connectors at the back of it.
8. Check all the accessories for the new Seicane car stereo.
9. Connect the harnesses to the back of the new Seicane car stereo.
10. Connect the Seicane car stereo to your original stereo’s plugs.
11. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
12. Put the new Seicane car stereo into the dash.
13. Put everything into their original place. All the installation is done.
Now can you finish your car stereo installation with the help of the 2013 2014 2015 Honda Accord 9 2.0L Car Stereo installation guide? If you have any questions, you can consult your dealer for advice or turn to a professional for help. Besides, before the installation, it is especially important for you to check the compatibility between your new car stereo and your car. If you don’t have any ideas, you may check out the link below which is about a 2013 2014 2015 Honda Accord 9 2.0L gps bluetooth car stereo from Seicane. Please click:
This remarkable 2013 2014 2015 Honda Accord 9 2.0L Car Stereo is powerful enough to become your best road companion. With it installed in your beloved car, you can easily get access to hands-free calls and Bluetooth music when you wirelessly connect your enabled mobile phone with this stereo through the Bluetooth module. And you can easily reach any destinations when you press the “GPS” button and make full use of turn-by-turn direction and voice prompts. Besides, thanks to its function as a multimedia player, you are able to freely enjoy music, FM/AM stereo, TV programs, movies, etc. Wish you like it.