How to replace a 1998-2006 BMW 3 Series E46 car stereo with Quad-core CPU Bluetooth Radio Tuner Mirror Link OBD2 3G WiFi

1998-2006 BMW 3 Series E46 car stereo after installation

Now I’d like to show you a wonderful 1998-2006 BMW 3 Series E46 car stereo from Seicane to you. It’s taken after the installation. With such an intelligent car stereo in your car, you can not only get to various destination under the guidance of the most accurate GPS navigation system, but also have great fun with its powerful entertainment function. Here comes the detailed installation instruction for it, wish it can be helpful for you.

1998-2006 BMW 3 Series E46 car stereo after installation
1998-2006 BMW 3 Series E46 car stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

1998-2006 BMW 3 Series E46 car stereo installation guide

1. The original car radio.

The original dashboard
The original dashboard

2. Use a lever to remove the trim strip.

Use a lever to remove the trim strip
Use a lever to remove the trim strip

3. Remove the two screws marked in the picture, pull out the original car radio and the air conditioner controller.

Remove the two screws marked in the picture, pull out the original CD player and the air conditioner controller
Remove the two screws marked in the picture, pull out the original CD player and the air conditioner controller

4. Remove the storage box.

Remove the storage box
Remove the storage box

5. Remove the four screws marked in the picture and pull out the radio bracket.

Remove the four screws marked in the picture and pull out the CD bracket
Remove the four screws marked in the picture and pull out the CD bracket

6. The radio bracket and the storage box.

The CD bracket and the storage box
The CD bracket and the storage box

7. Install the air conditioner controller in the place where the storage box used to be.

Install the air conditioner controller in the place where the storage box used to be
Install the air conditioner controller in the place where the storage box used to be

8. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car stereo to your original car radio ‘s plugs.

Connect the Seicane car radio to your original car radio 's plugs
Connect the Seicane car radio to your original car radio ‘s plugs

11. Have a test to check if everything works properly.

Have a test to check if everything works properly
Have a test to check if everything works properly

12. Fasten the screws and install the trim strip back.

Fasten the screws and install the trim strip back
Fasten the screws and install the trim strip back

Can you install this 1998-2006 BMW 3 Series E46 car stereo in you car with the help of the installation instruction ? If not, you can directly have a professional install it. If there is any question, you can ask your dealer for help. But if you haven’t found an ideal head unit for your car, you can refer to this amazing BMW 3 Series E46 car stereo from Seicane. It comes with the latest features and capabilities for you to upgrade your factory radio. For more details, you can click:

http://www.seicane.com/seicane-s12746-16g-1998-2006-bmw-3-series-e46-316i-318i-320i-323i-325i-android-gps-navigation-in-car-dvd-system-with-bluetooth-radio-tuner-mirror-link-obd2-3g-wifi-hd-1024-600-multi-touch-screen


This intelligent BMW 3 Series E46 car stereo can support multimedia formats like DVD/VCD/CD/MP3/MPEG4/DIVX/CD-R/WMA/JPEG etc. to bring you lots of fun while driving. It has turn-by-turn GPS navigation and tons of POIs! You can also safely make and receive hands-free phone calls, scroll contact lists and stream audio with Bluetooth from your enabled smart phone. Just take it and have great fun with it. Good luck to you!

6 comments on “How to replace a 1998-2006 BMW 3 Series E46 car stereo with Quad-core CPU Bluetooth Radio Tuner Mirror Link OBD2 3G WiFi

    • “Dear,
      so sorry for the inconvenience.
      In order to give you a fast solution,we suggest you asked our after sales staff for help.
      The email is Sales1@seicane.
      Have a good day!”

Leave a Reply

Your email address will not be published. Required fields are marked *