Home › 2018 › September

Monthly Archives: September 2018

How to Effective Upgrade a 2006 2007 2008 2009-2012 Suzuki SX4 GPS Sat Nav Bluetooth Audio Car Radio Stereo

Posted on by — 3 Comments ↓ 4,350 views
2006 2007 2008 2009 2010-2012 Suzuki SX4 car radio after installation

If you cannot wait to enjoy a more convenient and enjoyable in-car environment in your car, it will be a wise choice for you to install a new aftermarket car radio to replace your factory radio. With such an idea car radio installed in your car, you will get access to GPS navigation, Bluetooth hands-free phone calls, Bluetooth streaming music, FM/AM radio, etc. While for the installation, you can either go to a car radio upgrade center or turn to a professional technician for help. The following is a 2006 2007 2008 2009 2010-2012 Suzuki SX4 car radio installation guide from Seicane, you refer to it if you own the same or similar dashboard.

2006 2007 2008 2009 2010-2012 Suzuki SX4 car radio after installation
2006 2007 2008 2009 2010-2012 Suzuki SX4 car radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2006 2007 2008 2009 2010-2012 Suzuki SX4 car radio installation guide

1. The original car radio.

The original car radio
The original car radio

2. Remove two side panels.

Remove two side panels
Remove two side panels

3. Remove four screws that are holding the radio.

Remove four screws that are holding the radio
Remove four screws that are holding the radio

4. Gently pull out the original radio.

Gently pull out the original radio
Gently pull out the original radio

5. Disconnect the connectors and cables at the back of the radio.

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Now do you have a general understanding of the installation process about a 2006 2007 2008 2009-2012 Suzuki SX4 car radio? If you haven’t had any ideas, you can contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard to install the new car radio, you can directly arrange a professional technician to help you install the new car radio. And since it is very crucial for you to select an ideal car radio for your beloved car. If you don’t know which kind of car radio can fit your car well, you can refer to the following link which is a remarkable 2006 2007 2008 2009-2012 Suzuki SX4 car radio from Seicane. For more details, please click:

https://www.seicane.com/hd-touchscreen-android-radio-gps-for-2006-2012-suzuki-sx4-with-bluetooth-music-wifi-audio-system-1080p-video-usb-obd2-mirror-link-dvr-s04142



With the assistance of the worldwide real-time GPS navigation system of high accuracy, this car radio enables you to know your current location and find the right way to reach your desired destinations accurately even if you don’t have good sense of directions. And thanks to this unit’s dual zone function, this unit enables you to listen to your favorite music while navigating.

Besides, through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, you can able to dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to your favorite music streaming from your phone music playlists.

What’s more, you can also add a rear view camera to this unit for automatically switching to the parking image while reversing, which can help you gain a safe driving experience to some extent.

Wish you like this unit and good luck to you!

How to Remove a 2004 2005 2006 2007-2011 Ford Focus Exi MT Car Radio and Install a New Aftermarket Car Radio with a new Bluetooth Music Navigation System

Posted on by — No Comments ↓ 5,412 views
2004 2005 2006 2007-2011 Ford Focus Exi MT Car Radio after installation

Do not overestimate the complexity of the removal and installation on a car radio even you don’t have a general understanding at all. Actually, the car radio installation doesn’t require too much expertise so that you can also finish the whole installation process with a correct instruction and some related experience. The following is a detailed 2004 2005 2006 2007-2011 Ford Focus Exi MT car radio installation instruction from Seicane on a car radio. If you own the same or similar dashboard, you can refer to this car radio carefully.

2004 2005 2006 2007-2011 Ford Focus Exi MT Car Radio after installation
2004 2005 2006 2007-2011 Ford Focus Exi MT Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screw driver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s there commended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2004 2005 2006 2007-2011 Ford Focus Exi MT car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Carefully pry the plastic trim plate with both of your hands, which is in front of the place where the old car radio is situated.

Carefully pry the plastic trim plate with both of your hands, which is in front of the place where the old car radio is situated
Carefully pry the plastic trim plate with both of your hands, which is in front of the place where the old car radio is situated
2-1
2-1

3. Use a Philips screwdriver to unscrew the four self-tapping screws.

Use a Philips screwdriver to unscrew the four self-tapping screws
Use a Philips screwdriver to unscrew the four self-tapping screws
3-1
3-1

4. Gently remove the original car radio out of the dash.

Gently remove the original car radio out of the dash
Gently remove the original car radio out of the dash

5. Disconnect the antenna and connectors at the back of the original car radio.

Disconnect the antenna and connectors at the back of the original car radio
Disconnect the antenna and connectors at the back of the original car radio

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original car radio’s plugs.

9. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. If the new Seicane car radio works well, put it into the dash.

11. Put everything into their original place, and all the installation is done.

 

Wish the above installation steps can be helpful for you. If you meet any problems that you cannot solve by yourself, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to install the new car radio, you can directly arrange a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to pick an ideal car radio for your beloved car. If you have no ideas, you can refer to the following link which is a remarkable 2004 2005 2006 2007-2011 Ford Focus Exi MT car radio from Seicane. For more details, please click:

https://www.seicane.com/android-2004-2011-ford-focus-exi-mt-touchscreen-radio-gps-navi-with-usb-wifi-bluetooth-music-audio-system-1080p-video-mirror-link-dvr-obd2-s0473

This great car radio is running on the stable Android 6.0 operation system and a powerful quad-core CPU processor to strengthen its capabilities and performance. Therefore, with this car radio installed in your car, you can enjoy much smoother, faster and easier operation experience.

Thanks to this unit’s worldwide real-time GPS navigation system of high accuracy, you can easily locate where you are and get the optimal route option to reach your desired destinations according to turn-by-turn directions and voice prompts. Besides, through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your mobile phone music playlists. If you like this car radio, just don’t hesitate to add it to your shopping cart.

Wish you enjoy your driving accompanied by this car radio. Good luck!

How to Quick Remove and Replace a 2011 2012 2013 2014-2016 Honda CITY GPS Navigation Bluetooth Touch Screen Audio system Car Radio

Posted on by — 2 Comments ↓ 4,334 views

As far as I am concerned, an ideal car radio should not only come with practical features to bring convenience for a car owner but also meet the car owner’s entertainment needs to offer him a pleasant driving experience. If you think your old radio is not ideal enough, it is wise of you to quit it and install a new multifunctional one. This article mainly introduces some steps to upgrade a 2011 2012 2013 2014-2016 Honda CITY car radio. If you are interested in it, you can read it carefully.

2011 2012 2013 2014-2016 Honda CITY car radio after installation
2011 2012 2013 2014-2016 Honda CITY car radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. Please prepare a lever and a screwdriver before the removal and the installation.

5. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

 

2011 2012 2013 2014-2016 Honda CITY car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Remove screw below the radio and then pry the panel with a plastic removal tool.

Remove screw below the radio and then pry the panel with a plastic removal tool
Remove screw below the radio and then pry the panel with a plastic removal tool

3. Remove the storage pocket and then unscrew two hidden screws with a screwdriver.

Remove the storage pocketand then unscrew two hidden screws with a screwdriver
Remove the storage pocketand then unscrew two hidden screws with a screwdriver

4. Pry the panel with a plastic removal tool and then remove it.

Pry the panel with a plastic removal tool and then remove it
Pry the panel with a plastic removal tool and then remove it

5. Take out the original radio and disconnect the connectors at the back of the radio.

6. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo
Check all the accessories for the new Seicane car stereo

7. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo
Connect the harnesses to the back of the new Seicane car stereo

8. Connect the Seicane car stereo to your original stereo’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

 

If you comes across any problems, please don’t hesitate to consult your dealer, communicate with someone experienced or turn to a professional for help. Or if you are afraid of making damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. As for the selection of an ideal car radio, if you have no ideas, here I would like to share a remarkable 2011 2012 2013 2014-2016 Honda CITY car radio from Seicane with you. For more details, please click:

https://www.seicane.com/2011-2012-2016-honda-city-hd-touchscreen-android-radio-car-stereo-with-gps-navigation-bluetooth-usb-wifi-obd2-1080p-rearview-camera-mirror-link-s0409

This car radio comes with a wide range of practical and entertainment features, mainly including 3D GPS navigation system, FM/AM radio, Bluetooth hands-free phone calls, Bluetooth streaming music, SD card or USB connection, file management, etc.

Under the wireless Bluetooth technology, you can connect your Bluetooth-enabled mobile phone to this car radio so as to get access to both Bluetooth hands-free phone calls and Bluetooth streaming music without taking your hands off the steering wheel. Besides, thanks to this unit’s built-in high-end 3D GPS navigation system, you are able to easily know your current locations and find the right way to reach any locations you would like to go to under the guidance of the turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Wish you like this remarkable car radio and good luck to you!

Quick Upgrade and Replace tutorial for a 2003 2004 2005 2006-2007 Honda Accord 7 Bluetooth GPS Navigation Car Radio Audio system

Posted on by — 23 Comments ↓ 14,601 views
2003 2004 2005 2006-2007 Honda Accord 7 car radio after installation

What would you if you want to improve your in-car environment and take your driving experience up a notch? If I were you, I will remove the factory radio and install a new aftermarket car radio, which comes with both practical and entertainment features. If you also plan to replace your factory radio, you can refer to a correct installation guide to help you. This article mainly aims to introduce a 2003 2004 2005 2006-2007 Honda Accord 7 car radio installation guide from Seicane. If you own the same or similar dashboard, you can refer to this guide carefully.

2003 2004 2005 2006-2007 Honda Accord 7 car radio after installation
2003 2004 2005 2006-2007 Honda Accord 7 car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriverbefore the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2003 2004 2005 2006-2007 Honda Accord 7 car radio installation guide

1. Use a plastic removal tool to pry the panel on the top of the car radio.

Use a plastic removal tool to pry the panel on the top of the car radio
Use a plastic removal tool to pry the panel on the top of the car radio

2. Pull up the panel and put it aside.

Pull up the panel and put it aside
Pull up the panel and put it aside

3. Use the plastic removal tool to remove the trim part around the gear shifter, and then unplug the connectors or wires at the back.

Use the plastic removal tool to remove the trim part around the gear shifter, and then unplug theconnectors or wires at the back
Use the plastic removal tool to remove the trim part around the gear shifter, and then unplug the connectors or wires at the back
3-1
3-1

4. Get the gear shifter removed to thelower position and then remove the small plastic part whichis shown below. Then use a screw driver to unscrew all screws that fix the whole plastic part and then remove it.

Get the gear shifter removed to thelower position and then remove the small plastic part whichis shown below. Then use a screw driver to unscrew all screws that fix the whole plastic part and then remove it
Get the gear shifter removed to thelower position and then remove the small plastic part whichis shown below. Then use a screw driver to unscrew all screws that fix the whole plastic part and then remove it
4-1
4-1
4-2
4-2

5. Remove screws that fix the compartment on the bottom of the original car radio and then remove the compartment.

Remove screws that fix the compartment on the bottom of the original car radio and then remove the compartment
Remove screws that fix the compartment on the bottom of the original car radio and then remove the compartment
5-1
5-1

6. Remove all screws that fix the original car radio.

Remove all screws that fix the original car radio
Remove all screws that fix the original car radio

7. Gently take out the original car radio and unplug the connectors and cables at the back of the radio.

Gently take out the original car radio and unplug the connectors and cables at the back of the radio
Gently take out the original car radio and unplug the connectors and cables at the back of the radio

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original stereo’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place. All the installation is done.

 

Now do you have a understanding of 2003 2004 2005 2006-2007 Honda Accord 7 car radio installation? If you have any doubts, you can contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to install a new car radio, you can straightly go to a car radio upgrade center and ask a professional technician to help you install the new car radio. While for the selection of an ideal car radio, you can refer to the following link which is a 2003 2004 2005 2006-2007 Honda Accord 7 car radio from Seicane. For more details, please click:

https://www.seicane.com/android-2003-2007-honda-accord-7-car-stereo-gps-navigation-head-unit-with-1080p-video-bluetooth-music-autoradio-steering-wheel-control-rearview-camera-dvr-4g-wifi-s301188


With this car radio installed in your car, you can freely get access to a wide range of practical and entertainment features, mainly including 3D GPS navigation system of high precision, FM/AM radio tuner, Bluetooth hands-free phone calls, Bluetooth streaming music, file management, SD card or USB connection, etc.

With the assistance of the worldwide real-time GPS navigation system, you can easily locate where you are currently and find the right way to get to any locations you would like to go to according to the turn-by-turn directions and voice prompts. And thanks to this unit’s dual zone function, you can also listen to your favorite music while navigating.

Additionally, this unit comes with built-in Bluetooth module, which enables you to dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone music playlists for both convenience and enjoyment.

If you are interested with this car radio, just install it and enjoy your driving accompanied by it. Good luck!