Home › 2017 › Page 2

Yearly Archives: 2017

The Most Effective Way to Upgrade a 2009 2010 2011 2012 2013 Subaru outback GPS Car Radio with Bluetooth Speakers Navigation DVD Player

Posted on by — 4 Comments ↓ 8,978 views
2009 2010 2011 2012 2013 Subaru outback GPS Car Radio after installation

First of all, please look at the following image. It is a 2009 2010 2011 2012 2013 Subaru outback car radio from Seicane after installation. It looks very awesome, isn’t it? If you have the same or similar dashboard and would like to upgrade your factory radio, you can refer to the following installation guide to help with the new car radio installation.

2009 2010 2011 2012 2013 Subaru outback GPS Car Radio after installation
2009 2010 2011 2012 2013 Subaru outback GPS Car Radio after installation

Here are some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriverbefore the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009 2010 2011 2012 2013 Subaru outback car radio installation guide

1. The original car radio.

The original car radio
The original car radio

2. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside
2-1
2-1
2-2
2-2

3. Remove six screws that fixed the radio on the dashboard.

Remove six screws that fixed the radio on the dashboard
Remove six screws that fixed the radio on the dashboard
3-1
3-1
3-2
3-2
3-3
3-3

4. Gently pull the factory radio out of the dash.

Gently pull the factory radio out of the dash
Gently pull the factory radio out of the dash

5. Then unplug the connectors at the back of the factory radio.

Then unplug the connectors at the back of the factory radio
Then unplug the connectors at the back of the factory radio

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

That’s the whole removal and installation process for a 2009 2010 2011 2012 2013 Subaru outback car radio. If you cannot fully understand, please feel free to seek help from your dealer,, someone experienced or a professional. Besides, if you still think it hard for you to finish the whole installation process, you can directly arrange a professional to help you install the new car radio.

To help you select an ideal car radio, I would like to recommend a fabulous 2009 2010 2011 2012 2013 Subaru outback car radio from Seicane to you. Here comes the link, please click:

https://www.seicane.com/2009-2013-subaru-outback-android-radio-gps-navigation-system-with-bluetooth-dvd-player-with-hd-touch-screen-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-steering-wheel-control-usb-sd-mirror-link-s167069

Even you are driving around an unfamiliar city, you can depend on the built-in 3D GPS navigation system. With its help, you can plan the most suitable route to get to your destinations without mistakes through text-to-speech guidance. And this unit’s dual zone function makes it possible for you to enjoy your favorite music while navigating.

Besides, to guarantee your driving safety, the Bluetooth module is built in to make it possible for you to dial, receive or reject hands-free phone calls as well as enjoy streaming music from your phone music playlists without keeping your hands off the steering wheel.

What are you waiting for? Just add this unit to your shopping cart right now!

How to Upgrade a 2015 2016 Mercedes-Benz SMART GPS Bluetooth Car Radio Easily

Posted on by — No Comments ↓ 3,108 views
2015 2016 Mercedes-Benz SMART GPS Bluetooth Car Radio after installation

If your are desired of a brand new driving experience, you can think about replacing your factory radio with a new aftermarket car radio. And you can also try to remove the factory radio and install the new car radio by yourself since the car radio upgrade process is not complicated. The following is a 2015 2016 Mercedes-Benz SMART car radio installation guide. If you own the same or similar dashboard and you plan to upgrade your factory radio, you can refer to the guide carefully.

2015 2016 Mercedes-Benz SMART GPS Bluetooth Car Radio after installation
2015 2016 Mercedes-Benz SMART GPS Bluetooth Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2015 2016 Mercedes-Benz SMART car radio installation guide

1. Remove the decoration trim strips both on the left side and right side of the radio.

Remove the decoration trim strips both on the left side and right side of the radio
Remove the decoration trim strips both on the left side and right side of the radio
1-1
1-1
1-2
1-2

2. Use a plastic removal tool to pry the gap.

Use a plastic removal tool to pry the gap
Use a plastic removal tool to pry the gap
2-1
2-1
2-2
2-2

3. Gently take out the original radio.

Gently take out the original radio
Gently take out the original radio
3-1
3-1

4. Unplug the connectors and cables at the back of the radio.

5. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

6. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

7. Connect the Seicane car radio to your original stereo’s plugs.

8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car radio into the dash.

10. Put everything into their original place. All the installation is done.

 

Wish you succeed in the car radio installation with the help of the above installation guide. If you encounter any problems you cannot deal with by yourself, please don’t hesitate to seek help from your dealer, someone experienced or a professional. Anyway, before installation, please do select an ideal car radio. If you don’t have any ideas, you can refer to the following link which is a marvelous 2015 2016 Mercedes-Benz SMART car radio from Seicane.

https://www.seicane.com/android-hd-touchscreen-radio-for-2015-2016-mercedes-benz-smart-car-stereo-gps-navigation-system-bluetooth-support-mirror-link-obd2-aux-3g-wifi-dvr-1080p-video-steering-wheel-control-s75b01

This all-in-one car radio supports a wide range of practical and entertainment features, which can add a lot of convenience and enjoyment to your driving.

Under the wireless Bluetooth technology, you are able to dial, answer, reject or mute Bluetooth hands-free calls as well as listen to Bluetooth streaming music from your phone music playlists without taking your hands off the steering wheel. And this car radio’s additional features can also add a lot of fun to your trip.

Wish you have a wonderful driving experience accompanied by this car radio. Good luck!

How to Easily Upgrade a 2004 2005 2006 2007 2008-2010 Toyota Sienna Car Radio with Bluetooth GPS DVD Player Function

Posted on by — 8 Comments ↓ 11,562 views
2004 2005 2006 2007 2008-2010 Toyota Sienna Car Radio after installation

Do you have a 2004 2005 2006 2007 2008-2010 Toyota Sienna? And would you like to create a more convenient and relaxing in-car environment as well as embrace a brand new driving experience? If your answer is “yes”, then you can think about replacing your factory radio with a new aftermarket car radio. The following is a 2004 2005 2006 2007 2008-2010 Toyota Sienna car radio installation instruction from Seicane, which can be taken as your reference.

2004 2005 2006 2007 2008-2010 Toyota Sienna Car Radio after installation
2004 2005 2006 2007 2008-2010 Toyota Sienna Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004 2005 2006 2007 2008-2010 Toyota Sienna car radio installation instruction

1. The original car radio for 2004-2010 Toyota Sienna.

The original car radio for 2004-2010 Toyota Sienna
The original car radio for 2004-2010 Toyota Sienna

2. Use a flat-head screwdriver or a flat pry tool to pry up the vertical panels of the right and left side of the original car radio and climate control system.

Use a flat-head screwdriver or a flat pry tool to pry up the vertical panels of the right and left side of the original car radio and climate control system
Use a flat-head screwdriver or a flat pry tool to pry up the vertical panels of the right and left side of the original car radio and climate control system

3. Disconnect the wiring from the side panels. There are two wiring connectors on the left panel and only one connector on the right panel. Please carefully press the tab to release the connectors.

Disconnect the wiring from the side panels. There are two wiring connectors on the left panel and only one connector on the right panel. Please carefully press the tab to release the connectors
Disconnect the wiring from the side panels. There are two wiring connectors on the left panel and only one connector on the right panel. Please carefully press the tab to release the connectors
3-1
3-1

4. Remove the center channel speaker grill panel above the car radio. Please use a pry tool or a flat head screwdriver to pry up the top (center channel speaker) panel above the car radio and then remove it.

Remove the center channel speaker grill panel above the car radio. Please use a pry tool or a flat head screwdriver to pry up the top (center channel speaker) panel above the car radio and then remove it
Remove the center channel speaker grill panel above the car radio. Please use a pry tool or a flat head screwdriver to pry up the top (center channel speaker) panel above the car radio and then remove it
4-1
4-1

5. Remove the center speaker. There are two 10mm hex head nuts securing the center speaker, so you need to use a 10-mm Hollow-Shank nut screwdriver to remove these two bolts.

Remove the center speaker. There are two 10mm hex head nuts securing the center speaker, so you need to use a 10-mm Hollow-Shank nut screwdriver to remove these two bolts
Remove the center speaker. There are two 10mm hex head nuts securing the center speaker, so you need to use a 10-mm Hollow-Shank nut screwdriver to remove these two bolts

6. Disconnect the speaker wiring harness. Please press the tab down so as to release the wiring connector, and then set the speaker and bolts aside.

Disconnect the speaker wiring harness. Please press the tab down so as to release the wiring connector, and then set the speaker and bolts aside
Disconnect the speaker wiring harness. Please press the tab down so as to release the wiring connector, and then set the speaker and bolts aside

7. Remove the 4 10mm hex head nuts from the car radio. There are 4 bolts holding the car radio in the dash (2 on each side). Please use a screwdriver to remove these four bolts.

Remove the 4 10mm hex head nuts from the car radio. There are 4 bolts holding the car radio in the dash (2 on each side). Please use a screwdriver to remove these four bolts
Remove the 4 10mm hex head nuts from the car radio. There are 4 bolts holding the car radio in the dash (2 on each side). Please use a screwdriver to remove these four bolts
7-1
7-1

8. Gently pull the original car radio out of the dash and then disconnect the wiring from the original car radio. Then put the original car radio aside.

Gently pull the original car radio out of the dash and then disconnect the wiring from the original car radio. Then put the original car radio aside
Gently pull the original car radio out of the dash and then disconnect the wiring from the original car radio. Then put the original car radio aside
8-1
8-1

9. If necessary, please remove the left and right radio mounting brackets to install on the new Seicane car radio.

If necessary, please remove the left and right radio mounting brackets to install on the new Seicane car radio
If necessary, please remove the left and right radio mounting brackets to install on the new Seicane car radio

10. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

11. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

12. Connect the Seicane car radio to your original car radio’s plugs.

Connect the Seicane car radio to your original car radio's plugs
Connect the Seicane car radio to your original car radio’s plugs

13. Gently place the new Seicane car radio into the opening of the dash and test it.

14. Re-seat the stereo in the dash and reinstall the 4 bolts.

15. Carefully reconnect the center speaker and reinstall the 2 bolts.

Carefully reconnect the center speaker and reinstall the 2 bolts
Carefully reconnect the center speaker and reinstall the 2 bolts

16. Carefully reinstall top center channel speaker grill panel.

Carefully reinstall top center channel speaker grill panel
Carefully reinstall top center channel speaker grill panel

17. Reconnect all the electrical connectors and then reinstall the left and right side panels.

 

Wish you can succeed in the whole upgrade process of this unit. If you have any doubts, you can consult your dealer for seeking advice or turn to a professional for help. Anyway, first of all, please select an ideal car radio for your beloved car. If you don’t have any ideas, I’d like to recommend a great 2004 2005 2006 2007 2008-2010 Toyota Sienna car radio from Seicane to you. For more details, please click:

https://www.seicane.com/oem-android-2004-2010-toyota-sienna-radio-dvd-gps-navigation-system-with-bluetooth-hd-touchscreen-mirror-link-4g-wifi-aux-dvr-1080p-dab-tpms-backup-camera-s166205

This great car radio, featured with the intelligent Android 7.1 operation system and a high-quality quad-core CPU processor, enables you to enjoy its fast response, smooth operation and high performance.

Thanks to the turn-by-turn directions and voice prompts provided by the 3D GPS navigation system, you can easily know your current locations and navigate to your desired destinations. And with dual zone function, this unit enables you to listen to your favorite music while navigating. And the music can automatically switch to GPS voice.

Additionally, this unit also comes with some entertainment features to add a lot of fun to your driving.

Wish you like this unit and good luck to you.

The Advanced Instruction on a 2014 2015 2016 2017 Jeep Grand Cherokee Car Radio Removal and Installation with a Bluetooth GPS Navigation System

Posted on by — No Comments ↓ 7,637 views
2014 2015 2016 2017 Jeep Grand Cherokee Car Radio after installation

There is no denying that with an ideal car radio installed in your car, you can get access to a wide range of practical and entertainment features. So if you are fed up with your factory radio, you can replace it with a new aftermarket car radio. And with a related installation guide, you can also try to remove the factory radio and install the new car radio. The following is a 2014 2015 2016 2017 Jeep Grand Cherokee car radio installation guide from Seicane. Wish you can get some help from it.

2014 2015 2016 2017 Jeep Grand Cherokee Car Radio after installation
2014 2015 2016 2017 Jeep Grand Cherokee Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriverbefore the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2014 2015 2016 2017 Jeep Grand Cherokee car radio installation guide

1. Prepare a plastic removal tool. Remove the AC control panel.

Prepare a plastic removal tool. Remove the AC control panel
Prepare a plastic removal tool. Remove the AC control panel
1-1
1-1

2. Remove two screws below.

Remove two screws below
Remove two screws below
2-1
2-1

3. Remove the radio trim panel with a plastic removal tool.

Remove the radio trim panel with a plastic removal tool
Remove the radio trim panel with a plastic removal tool
3-1
3-1

4. Unscrew four screws that are holding the radio on the dashboard.

Unscrew four screws that are holding the radio on the dashboard
Unscrew four screws that are holding the radio on the dashboard

5. Gently remove the original radio.

Gently remove the original radio
Gently remove the original radio

6. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio
Disconnect the connectors and cables at the back of the radio

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original stereo’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Wish the above removal and installation steps can be helpful for you. If you have any questions, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. Besides, to help you select an ideal car radio, here I would like to share an amazing 2014 2015 2016 2017 Jeep Grand Cherokee car radio from Seicane with you.

https://www.seicane.com/hd-touch-screen-2014-2015-2016-2017-jeep-cherokee-android-radio-gps-navigation-bluetooth-music-usb-wifi-audio-system-support-dvr-obd2-tpms-digital-tv-backup-camera-1080p-video-auto-a-v-s18jp62

This great 2014 2015 2016 2017 Jeep Grand Cherokee car radio, equipped with the worldwide real-time 3D GPS navigation system, enables you to locate where you are and navigate to your desired destinations through turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to freely listen to your favorite music while navigating. Besides, you can also make full advantage of this unit’s built-in Bluetooth module to get access to hands-free calls and Bluetooth music streaming from your Bluetooth-enabled mobile phone and this unit.

Don’t hesitate to purchase this unit and wish you enjoy your driving accompanied by it!

How to Upgrade a 2015 2016 HYUNDAI TUSCON IX35 (RHD) Car Radio Audio with Bluetooth GPS Navigation Function

Posted on by — No Comments ↓ 5,583 views
2015 2016 HYUNDAI TUSCON IX35 (RHD) Car Radio after installation

As a car owner, you may find that your factory radio will be not compatible with some modern features after being used for a long time. In that case, you can replace it with a new aftermarket car radio. This article is mainly about a 2015 2016 HYUNDAI TUSCON IX35 (RHD) car radio installation guide from Seicane. If you have the same or similar dashboard, you can refer to this guide carefully.

2015 2016 HYUNDAI TUSCON IX35 (RHD) Car Radio after installation
2015 2016 HYUNDAI TUSCON IX35 (RHD) Car Radio after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2015 2016 HYUNDAI TUSCON IX35 (RHD) car radio installation guide

1. The original car radio.

The original car radio
The original car radio

2. Use plastic removal tools to pry the top panel and remove it.

Use plastic removal tools to pry the top panel and remove it
Use plastic removal tools to pry the top panel and remove it
2-1
2-1

3. Remove three top screws that secure the panel.

Remove three top screws that secure the panel
Remove three top screws that secure the panel

4. Use the plastic removal tool to pry the car radio trim panel.

Use the plastic removal tool to pry the car radio trim panel
Use the plastic removal tool to pry the car radio trim panel

5. Use a kick tool to release two clips.

Use a kick tool to release two clips
Use a kick tool to release two clips

6. Carefully remove the panel.

Carefully remove the panel
Carefully remove the panel

7. Use a screwdriver to remove four screws that hold the original car radio on the dashboard.

Use a screwdriver to remove four screws that hold the original car radio on the dashboard
Use a screwdriver to remove four screws that hold the original car radio on the dashboard

8. Gently take out the original car radio.

Gently take out the original car radio
Gently take out the original car radio

9. Disconnect connectors and cables at the back the radio.

10. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

11. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

12. Connect the Seicane car radio to your original radio’s plugs.

13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14. Put the new Seicane car radio into the dash.

15. Put everything into their original place. All the installation is done.

 

Wish you can gain some inspiration from the above installation guide. If you have any doubts, you can seek help from your dealer, someone experienced or a professional. Or you can directly arrange a professional technician to help you install the new car radio.

Besides, it is essential for you to select an ideal car radio for your beloved car. If you have no ideas, I’d like to share an amazing 2015 2016 HYUNDAI TUSCON IX35 (RHD) car radio from Seicane with you. Here comes the link, please click:

https://www.seicane.com/touchscreen-for-android-2015-hyundai-tuscon-ix35-rhd-dvd-player-radio-gps-bluetooth-navigation-system-car-stereo-with-1080p-video-mirror-link-steering-wheel-control-3g-wifi-obd2-tpms-backup-camera-s18hy065r

Compatible with a wide range of practical and entertainment features, this car radio can provide you with a brand new driving experience.

Thanks to the worldwide real-time GPS navigation system, you are able to know your current locations and navigate to your desired destinations through turn-by-turn directions. And this unit’s dual zone function enables you to freely listen to radio, USB or SD card music playback.

Besides, this unit’s additional entertainment features will add a lot of joyfulness to your driving.

Wish you like this unit and good luck to you.

A Common Way to Upgrade a 2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 Car Radio with Bluetooth GPS Navigation DVD Player

Posted on by — No Comments ↓ 8,244 views
2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 Car Radio after installation

Believe it or not, to install a remarkable all-in-one car radio for your car will bring your great convenience and enjoyment during driving. Therefore, more and more car owners would like to replace their old factory radio with a new aftermarket car radio. If you also want to upgrade your factory radio, you can find a related installation guide to help you. The following is a 2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 car radio installation guide from Seicane. If you have the same or similar dashboard, you can refer to this guide carefully.

2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 Car Radio after installation
2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 Car Radio after installation

Before and during installation, you should notice:

1. Before connecting,please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire,so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 car radio installation guide

1. Remove the padded covers from the two sides of the lower section at the center of the dash.

Remove the padded covers from the two sides of the lower section at the center of the dash
Remove the padded covers from the two sides of the lower section at the center of the dash
1-1
1-1

2. Next remove the silver Philips-head screw at the top and unclip the plastic retainer at the bottom of each side cover.

Next remove the silver Philips-head screw at the top and unclip the plastic retainer at the bottom of each side cover
Next remove the silver Philips-head screw at the top and unclip the plastic retainer at the bottom of each side cover

3. Remove the side covers by pulling them towards the rear of the vehicle and slightly outwards.

Remove the side covers by pulling them towards the rear of the vehicle and slightly outwards
Remove the side covers by pulling them towards the rear of the vehicle and slightly outwards
3-1
3-1

4. Carefully remove the top cover by using a plastic flat removal tool.

5. Remove the air conditioning vents, and then disconnect the temperature control wires.

Remove the air conditioning vents, and then disconnect the temperature control wires
Remove the air conditioning vents, and then disconnect the temperature control wires

6. Remove the radio fascia and disconnect the wires at the back of it.

Remove the radio fascia and disconnect the wires at the back of it
Remove the radio fascia and disconnect the wires at the back of it

7. Pull out the lower segment containing the ashtray and power outlets.

8. Remove the air conditioning control and display section and its wiring connector.

Remove the air conditioning control and display section and its wiring connector
Remove the air conditioning control and display section and its wiring connector
8-1
8-1

9. Remove screws that fix the radio on the dashboard.

10. Disconnect the connectors at the back of the radio.

11. Check all the accessories for the new Seicane car radio.

12. Connect the harnesses to the back of the new Seicane car radio.

13. Connect the Seicane car radio to your original radio’s plugs.

14. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

15. Put the new Seicane car radio into the dash.

16. Put everything into their original place.

 

Wish the above installation guide can do some help for your upgrading. If you have any doubts, you can turn your dealer or a professional for help. Or you can ask someone experienced to help you alongside. Besides, to help your better choose a suitable car radio for your car, I’d like to share a remarkable 2004 2005 2006 2007 2008-2016 TOYOTA LAND CRUISER LC200 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/oem-android-dvd-player-for-2004-2016-toyota-land-cruiser-lc200-radio-replacement-with-touch-screen-gps-car-stereo-bluetooth-music-mirror-link-obd2-3g-wifi-video-backup-camera-s18t265

This unit is upgraded to the most advanced Android 7.1.2 operation system and a high-quality quad-core CPU processor, so you can enjoy its higher configuration and better performance.

With the worldwide real-time GPS navigation system built in this unit, you can easily locate where you are and navigate to your desired destinations through turn-by-turn directions and voice prompts. And while navigating, you can also listen to radio, USB or SD card music playback thanks to this unit’s dual zone function.

And under the wireless Bluetooth technology, you can pair your Bluetooth-enabled mobile phone with this car radio so as to get access to Bluetooth hands-free calls and Bluetooth streaming music which can bring you both convenience and joyfulness during driving.

Wish you like it and good luck to you!

How to Remove and Install a 2008 2009 2010 2011 2012-2016 TOYOTA Venza GPS Navi DVD Car Stereo with Bluetooth Audio Navigation DVD Player Fast

Posted on by — 2 Comments ↓ 10,333 views
2008 2009 2010 2011 2012-2016 TOYOTA Venza GPS Navi after installation

If you plan to build a more comfortable and convenient in-car environment as well as embrace a brand new driving experience, it will be a great choice of you to replace your factory radio with a new aftermarket car radio. To help you successfully finish the whole removal and installation process, here I’d like to share a 2008 2009 2010 2011 2012-2016 TOYOTA Venza car radio installation instruction from Seicane with you. If you have the same or similar dashboard, you can refer to this instruction to help with your installation.

2008 2009 2010 2011 2012-2016 TOYOTA Venza GPS Navi after installation
2008 2009 2010 2011 2012-2016 TOYOTA Venza GPS Navi after installation

Here are some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriverbefore the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008 2009 2010 2011 2012-2016 TOYOTA Venza car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Use a plastic removal tool to remove the paneland disconnect the connector at the back of it.

Use a plastic removal tool to remove the paneland disconnect the connector at the back of it
Use a plastic removal tool to remove the paneland disconnect the connector at the back of it
2-1
2-1

3. Remove Phillip screws which fix the AC control.

Remove Phillip screws which fix the AC control
Remove Phillip screws which fix the AC control

4. Take out the AC controland unplug the connector at the back.

Take out the AC controland unplug the connector at the back
Take out the AC controland unplug the connector at the back

5. Use a screwdriver and flexibility jointto remove mounting screws.

6. Gently take out the original car radio.

Gently take out the original car radio
Gently take out the original car radio

7. Disconnect the connectors and cables at the back of the radio.

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original radio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place.

 

Wish you get some inspiration from the above steps. If you have any questions, you might as well consult your dealer for valuable advice or seek help from a professional. Or if you are afraid of making damage to either your car radio or your car, you can directly go to a car radio upgrade center to have the new car radio installed by a professional technician.

Besides, as for the selection of an ideal car radio, if you don’t have any ideas, I’d like to recommend a remarkable 2008 2009 2010 2011 2012-2016 TOYOTA Venza car radio from Seicane to you.

https://www.seicane.com/cheap-2008-2016-toyota-venza-head-unit-with-radio-bluetooth-gps-navigation-system-touch-screen-cd-dvd-player-3g-wifi-mirror-link-obd2-aux-dvr-steering-wheel-control-backup-camera-s18t027

After get this car radio installed in your car, your car interior environment can be greatly improved and you can embrace a brand new driving experience.

Even you are traveling around a totally unfamiliar place, you won’t get lost any more since this unit come with the high-accuracy GPS navigation function. With its help, you can easily know your current locations and find the right way to reach your desired destinations through text-to-speech guidance. And while navigating, you can freely listen to your favorite music thanks to this unit’s dual zone function, and the music will automatically switch to GPS voice.

Wish you like this unit and good luck to you!

Effective Steps to Install a 2008 2009 2010 2011 2012-2017 JEEP Wrangler Car Radio with GPS Bluetooth Car Radio

Posted on by — 4 Comments ↓ 7,796 views

As the technology rapidly develops, an ideal car radio should be compatible with a higher performance and various functions. If your factory radio can not support many modern features, then it is wise of you to replace your factory radio with a new aftermarket car radio. The following is a straightforward 2008 2009 2010 2011 2012-2017 JEEP Wrangler car radio installation instruction from Seicane. If you have the same or similar dashboard, you can refer to this instruction carefully.

2008 2009 2010 2011 2012-2017 JEEP Wrangler Car Radio after installation
2008 2009 2010 2011 2012-2017 JEEP Wrangler Car Radio after installation

4 tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2008 2009 2010 2011 2012-2017 JEEP Wrangler car radio installation instruction

1. Get the window control out of the original place, so that you can get access to the screw that is behind it.

Get the window control out of the original place, so that you can get access to the screw that is behind it
Get the window control out of the original place, so that you can get access to the screw that is behind it

2. Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control.

Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control
Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control
2-1
2-1

3. You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out.

You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out
You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out
3-1
3-1

4. There is a clip and you need to push it down and make it come right off, after that, put this window control to the side.

There is a clip and you need to push it down and make it come right off, after that, put this window control to the side
There is a clip and you need to push it down and make it come right off, after that, put this window control to the side
4-1
4-1
4-2
4-2
4-3
4-3

5. Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray.

Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray
Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray
5-1
5-1
5-2
5-2

6. Next you are going to pull away the trim under the steering wheel.

Next you are going to pull away the trim under the steering wheel
Next you are going to pull away the trim under the steering wheel
6-1
6-1

7. With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set.

With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set
With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set

8. Firmly pull the dash and it should be clipped out.

Firmly pull the dash and it should be clipped out
Firmly pull the dash and it should be clipped out
8-1
8-1

9. With the dash removed, you now can have access to the four bolts that are holding the original car radio.

With the dash removed, you now can have access to the four bolts that are holding the original car radio
With the dash removed, you now can have access to the four bolts that are holding the original car radio

10. Remove these four bolts with the seven millimeter screwdriver.

Remove these four bolts with the seven millimeter screwdriver
Remove these four bolts with the seven millimeter screwdriver

11. With all the bolts removed, the original car radio should simply slide out from the original place.

With all the bolts removed, the original car radio should simply slide out from the original place
With all the bolts removed, the original car radio should simply slide out from the original place
11-1
11-1

12. Disconnect the factory connectors and wires at the back of the original car radio.

Disconnect the factory connectors and wires at the back of the original car radio
Disconnect the factory connectors and wires at the back of the original car radio

13. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

14. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

15. Connect the Seicane car radio to your original radio’s plugs.

16. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane car radio into the dash.

18. Put everything into their original place. All the installation is done.

 

Wish the above installation guide can be helpful for you. If you have any doubts, please don’t hesitate to consult your dealer, someone experienced or turn to a professional for help. Anyway, before installation, please select an ideal car radio for your beloved car. If you don’t have any ideas, you might as well check out the following link which is an amazing 2008 2009 2010 2011 2012-2017 JEEP Wrangler car radio from Seicane.

https://www.seicane.com/android-hd-touchscreen-radio-head-unit-for-2008-2009-2010-2011-2017-jeep-wrangler-with-gps-navigation-system-bluetooth-music-wifi-usb-mirror-link-1080p-video-s18jp25

This intelligent car radio for a 2008 2009 2010 2011 2012-2017 JEEP Wrangler can be regarded as one of the best replacements for your outdated factory radio. It is running on the most advanced and stable Android 7.1.2 operation system and a high-quality quad-core CPU processor to enhance your car’s capabilities and performance.

When you turn on the GPS navigation system, you are able to know your current locations and get the optimal route option to reach your desired destinations through turn-by-turn directions and voice prompts. And with dual zone function, this unit enables you to listen to your favorite music while navigating, which won’t have any negative influence on GPS navigation function.

Wish you enjoy your trip accompanied by this unit. Good luck to you!

How to Replace a 2013 OPEL MOKKA Car Radio with Touch Screen DVD Bluetooth GPS Navigation System

Posted on by — 2 Comments ↓ 9,920 views
2013 OPEL MOKKA Car Radio after installation

For a more convenient and comfortable in-car environment as well as a more relaxing driving experience, more and more car owners would like to replace their factory radio with a new aftermarket car radio which comes with a lot of comprehensive features to meet their needs in car. If you also want to upgrade your in-car experience, you can consider replacing your factory radio under the guidance of a related guide. The following is a 2013 OPEL MOKKA car radio installation guide. If you have the same or similar dashboard, you can take this guide as a reference.

2013 OPEL MOKKA Car Radio after installation
2013 OPEL MOKKA Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2013 OPEL MOKKA car radio installation guide

1. The original car radio.

The original car radio
The original car radio

2. Use a plastic removal tool to remove the trim panel.

Use a plastic removal tool to remove the trim panel
Use a plastic removal tool to remove the trim panel
2-1
2-1

3. Use a screwdriver to remove four screws that are fixing the radio panel.

Use a screwdriver to remove four screws that are fixing the radio panel
Use a screwdriver to remove four screws that are fixing the radio panel
3-1
3-1

4. Remove the original car radio panel.

Remove the original car radio panel
Remove the original car radio panel

5. Remove screws that are holding the original car radio.

Remove screws that are holding the original car radio
Remove screws that are holding the original car radio

6. Gently take the original car radio out of the dashboard and disconnect the connectors at the back of it.

Gently take the original car radio out of the dashboard and disconnect the connectors at the back of it
Gently take the original car radio out of the dashboard and disconnect the connectors at the back of it

7. Use the plastic removal tool to pry up the air vent and remove the connector at the back so as to get access to the screen.

Use the plastic removal tool to pry up the air vent and remove the connector at the back so as to get access to the screen
Use the plastic removal tool to pry up the air vent and remove the connector at the back so as to get access to the screen

8. Unscrew screws that are holding the screen and then remove the screen.

9. Check all the accessories for the new Seicane car radio.

10. Connect the harnesses to the back of the new Seicane car radio.

11. Connect the Seicane car radio to your original radio’s plugs.

12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane car radio into the dash.

14. Put everything into their original place. All the installation is done.

 

Wish you can gain some inspiration from the above installation instruction. If you come across any problems you cannot solve independently, please don’t hesitate to consult your dealer or seek help from a professional. Besides, you can also ask someone experienced to help you alongside. Anyway, it is essential for you to pick an ideal car radio for your beloved car. If you don’t have any ideas, you can check out the following link which is an amazing 2013 OPEL MOKKA car radio from Seicane.

https://www.seicane.com/aftermarket-radio-android-dvd-player-for-2013-opel-mokka-gps-navigation-support-wifi-bluetooth-usb-1080p-video-mirror-link-dvr-obd2-dab-s32549f

This remarkable car radio based on the advanced Android 7.1.1 operation system and a high-quality quad-core CPU processor will greatly facilitate the operation and performance.

Thanks to the worldwide real-time GPS navigation system of high accuracy, you can easily know your current locations and be guided to any locations you would like to go to through turn-by-turn directions and voice prompts. And you can make use of the dual zone function to enjoy your favorite music while navigating.

Under the wireless Bluetooth technology, you are able to pair your Bluetooth-enabled mobile phone with this unit so as to dial, answer, reject and mute hands-free calls as well as listen to streaming music, which can provide you with a safer and more relaxing trip.

What are you waiting for? If you like this unit, just add it to your shopping cart.

How to Upgrade a 2005 2006 2007 2008 2009-2012 BMW 3 Series E90 E91 E92 E93 Car Radio with Radio DVD Player GPS Navigation System

Posted on by — 2 Comments ↓ 10,272 views
2005 2006 2007 2008 2009-2012 BMW 3 Series E90 E91 E92 E93 Car Radio after installation

If you are desired of a brand new driving experience, you can think about replacing your factory radio with a new aftermarket car radio which can support a lot of comprehensive features in your car. If you are going to install a new car radio by yourself, what you need to do is to find a detailed installation instruction to help you. Here comes a detailed 2005 2006 2007 2008 2009-2012 BMW 3 Series E90 E91 E92 E93 car radio installation instruction from Seicane. If you also have a 2005 2006 2007 2008 2009-2012 BMW 3 Series E90 E91 E92 E93, you can follow it to install your new car radio step by step.

2005 2006 2007 2008 2009-2012 BMW 3 Series E90 E91 E92 E93 Car Radio after installation
2005 2006 2007 2008 2009-2012 BMW 3 Series E90 E91 E92 E93 Car Radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005 2006 2007 2008 2009-2012 BMW 3 Series E90 E91 E92 E93 car radio installation instruction

1. The original dashboard before installation.

The original dashboard before installation
The original dashboard before installation

2. Pry the panel off with a lever. You need to lift the air-conditioning assembly and don’t pry the air-conditioning panel off directly.

Pry the panel off with a lever. You need to lift the air-conditioning assembly and don't pry the air-conditioning panel off directly
Pry the panel off with a lever. You need to lift the air-conditioning assembly and don’t pry the air-conditioning panel off directly

3. Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out.

Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out
Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out
3-1
3-1

4. Disconnect the power plug behind the CD player and the plug of the radio aerials.

Disconnect the power plug behind the CD player and the plug of the radio aerials
Disconnect the power plug behind the CD player and the plug of the radio aerials
4-1
4-1

5. Take off the plastic bracket frame behind the CD player. Six screws are shown in the picture as follow. 4 of them are T20 screws, 2 of them are turnbuckles (no.8).

Take off the plastic bracket frame behind the CD player. Six screws are shown in the picture as follow. 4 of them are T20 screws, 2 of them are turnbuckles (no.8)
Take off the plastic bracket frame behind the CD player. Six screws are shown in the picture as follow. 4 of them are T20 screws, 2 of them are turnbuckles (no.8)

6. Unscrew the 2 turnbuckles (no.8).After the removal, the bracket is not needed, because the DVD comes with its metal bracket panel.

Unscrew the 2 turnbuckles (no.8).After the removal, the bracket is not needed, because the DVD comes with its metal bracket panel
Unscrew the 2 turnbuckles (no.8).After the removal, the bracket is not needed, because the DVD comes with its metal bracket panel

7. Check all the accessories for the new Seicane radio.

8. Connect the harnesses to the back of the new Seicane radio.

9. Connect the Seicane radio to your original radio’s plugs.

10. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane radio into the dash.

12. Put everything into their original place.

 

Wish the above installation instruction can be helpful for you to some extent. If you meet any difficulties, you can consult your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard for you to install the new car radio, it is suggested that you should arrange a professional technician to help you directly install the new car radio. To help you select an ideal car radio, I would like to share a remarkable 2005 2006 2007 2008 2009-2012 BMW 3 Series E90 E91 E92 E93 car radio from Seicane with you. Here comes the link, please click:

https://www.seicane.com/android-radio-dvd-player-radio-for-2005-2012-bmw-3-series-e90-e91-e92-e93-automatic-air-gps-navigation-system-support-bluetooth-1080p-video-usb-multi-media-player-dvr-mirror-link-s32713f

Loaded with the latest and most stable Android 7.1.1 operation system and a high-quality quad-core CPU processor, this intelligent car radio can provide you with faster response, higher performance and better capabilities to enrich your in-car life.

With the assistance of the high-accuracy 3D GPS navigation system, you are able to locate where you are and navigate to your desired destinations through turn-by-turn directions and voice prompts. And while navigating, you can also freely listen to radio, USB or SD music playback, which won’t have any negative influence on GPS function.

While as for the entertainment features, you can utilize this unit’s DVD player function to play your favorite music, TV programs, movies, etc to play whatever you like in motion.

If you like this car radio, just add it to your shopping cart and wish you have a wonderful driving experience accompanied by it.