How to Replace a 2013 OPEL MOKKA Car Radio with Touch Screen DVD Bluetooth GPS Navigation System

2013 OPEL MOKKA Car Radio after installation

For a more convenient and comfortable in-car environment as well as a more relaxing driving experience, more and more car owners would like to replace their factory radio with a new aftermarket car radio which comes with a lot of comprehensive features to meet their needs in car. If you also want to upgrade your in-car experience, you can consider replacing your factory radio under the guidance of a related guide. The following is a 2013 OPEL MOKKA car radio installation guide. If you have the same or similar dashboard, you can take this guide as a reference.

2013 OPEL MOKKA Car Radio after installation
2013 OPEL MOKKA Car Radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2013 OPEL MOKKA car radio installation guide

1. The original car radio.

The original car radio
The original car radio

2. Use a plastic removal tool to remove the trim panel.

Use a plastic removal tool to remove the trim panel
Use a plastic removal tool to remove the trim panel
2-1
2-1

3. Use a screwdriver to remove four screws that are fixing the radio panel.

Use a screwdriver to remove four screws that are fixing the radio panel
Use a screwdriver to remove four screws that are fixing the radio panel
3-1
3-1

4. Remove the original car radio panel.

Remove the original car radio panel
Remove the original car radio panel

5. Remove screws that are holding the original car radio.

Remove screws that are holding the original car radio
Remove screws that are holding the original car radio

6. Gently take the original car radio out of the dashboard and disconnect the connectors at the back of it.

Gently take the original car radio out of the dashboard and disconnect the connectors at the back of it
Gently take the original car radio out of the dashboard and disconnect the connectors at the back of it

7. Use the plastic removal tool to pry up the air vent and remove the connector at the back so as to get access to the screen.

Use the plastic removal tool to pry up the air vent and remove the connector at the back so as to get access to the screen
Use the plastic removal tool to pry up the air vent and remove the connector at the back so as to get access to the screen

8. Unscrew screws that are holding the screen and then remove the screen.

9. Check all the accessories for the new Seicane car radio.

10. Connect the harnesses to the back of the new Seicane car radio.

11. Connect the Seicane car radio to your original radio’s plugs.

12. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

13. Put the new Seicane car radio into the dash.

14. Put everything into their original place. All the installation is done.

 

Wish you can gain some inspiration from the above installation instruction. If you come across any problems you cannot solve independently, please don’t hesitate to consult your dealer or seek help from a professional. Besides, you can also ask someone experienced to help you alongside. Anyway, it is essential for you to pick an ideal car radio for your beloved car. If you don’t have any ideas, you can check out the following link which is an amazing 2013 OPEL MOKKA car radio from Seicane.

https://www.seicane.com/aftermarket-radio-android-dvd-player-for-2013-opel-mokka-gps-navigation-support-wifi-bluetooth-usb-1080p-video-mirror-link-dvr-obd2-dab-s32549f

This remarkable car radio based on the advanced Android 7.1.1 operation system and a high-quality quad-core CPU processor will greatly facilitate the operation and performance.

Thanks to the worldwide real-time GPS navigation system of high accuracy, you can easily know your current locations and be guided to any locations you would like to go to through turn-by-turn directions and voice prompts. And you can make use of the dual zone function to enjoy your favorite music while navigating.

Under the wireless Bluetooth technology, you are able to pair your Bluetooth-enabled mobile phone with this unit so as to dial, answer, reject and mute hands-free calls as well as listen to streaming music, which can provide you with a safer and more relaxing trip.

What are you waiting for? If you like this unit, just add it to your shopping cart.