Home › 2019 › March

Monthly Archives: March 2019

The installation instruction for 2012 2013 2014 Hyundai Avante Elantra GPS Navigation Bluetooth Radio Head Unit

Posted on by — No Comments ↓ 3,548 views
2012 2013 2014 Hyundai Avante Elantra car radio after installation

With time going, you may find that your car stereo system is out of date to support the new functions. The normal way to solve it is to remove the original one and install the new system accordingly to have total refreshed and complete audio-visual enjoyment when driving.

No worries, here we conclude some car radio installation instruction from Seicane specially for 2012 2013 2014 Hyundai Avante Elantra. You can take it as a reference.

2012 2013 2014 Hyundai Avante Elantra car radio after installation
2012 2013 2014 Hyundai Avante Elantra car radio after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2012 2013 2014 Hyundai Avante Elantra car radio installation instruction

1. Remove the trim panels from each side of center console.

Remove the trim panels from each side of center console
Remove the trim panels from each side of center console

2. Remove bottom 4 bolts behind the trim piece.

Remove bottom 4 bolts behind the trim piece
Remove bottom 4 bolts behind the trim piece

3. Gently pry around the side of trim panel and then remove the bottom ac vent controls.

Gently pry around the side of trim panel and then remove the bottom ac vent controls
Gently pry around the side of trim panel and then remove the bottom ac vent controls

4. Remove 4 screws securing radio chassis to sub dash.

Remove 4 screws securing radio chassis to sub dash
Remove 4 screws securing radio chassis to sub dash

5. Gently pry around the side of bottom trim panel and take out the original radio.

Gently pry around the side of bottom trim panel and take out the original radio
Gently pry around the side of bottom trim panel and take out the original radio

6. Disconnect the smaller harness on the behind of the original car radio.

Disconnect the smaller harness on the behind of the original car radio
Disconnect the smaller harness on the behind of the original car radio

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original car radio’s plugs.

10. Install four screws and trim panel.

11. Install the trim piece.

12. Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

 

Before installation, please make clear every detailed specific step and your car model and related compatible replacement radio system. If you have any doubts, please don’t hesitate to consult your dealer for seeking valuable advice. If you are still searching for an ideal car radio, here I would like to share a remarkable Seicane Android 6.0 HD Touchscreen Stereo Bluetooth GPS Navigation Radio System for 2012 2013 2014 Hyundai Avante Elantra with you. For more details, please click:

https://www.seicane.com/2012-2013-2014-hyundai-avante-elantra-android-hd-touchscreen-stereo-bluetooth-gps-navigation-radio-with-wifi-aux-usb-steering-wheel-control-support-dvr-rearview-camera-obd-h783

This unit is specially for 2012 2013 2014 Hyundai Avante Elantra, which comes with a large 9.7 inch screen with HD 1024*768 resolution.

Quad-core 1.5GHz CPU, up to 600MHz GPU made it possible to offer smooth and fast experience when execute the multitask.

With stable Android 6.0 operation system and multipoint high sensitive touchscreen, it has great advantage in smooth operation and visual enjoyment.

The powerful GPS module, supporting both online and offline navigation app from google play market and updating data at any time, leads you in the right way whenever you don’t know the ways or lose internet connection. Besides, it supports Bluetooth, RDS radio, steering wheels control, rear wheel camera control etc to meet your overall demands.

How do you think this unit? How about having a try!

How to Easily Install and Upgrade a GPS Navigation Bluetooth Radio Head Unit for 2006 2007 2008 2009-2012 Toyota Corolla

Posted on by — No Comments ↓ 2,371 views
Car Radio Player for 2006-2012 Toyota Corolla after installation

Is there any moment you found the original radio is kind of too old to totally meet your needs?

Is there any moment you are tired of the complicated operation and craving for the more convenient stereo system?

Come on, time to change and upgrade it with a brand new aftermarket car radio.

The following is a 2006 2007 2008 2009-2012 Toyota Corolla car radio installation instruction from Seicane, which enables you to have a general understanding of the new car radio. If you have the same or similar dashboard, you can refer to the following instruction.

Car Radio Player for 2006-2012 Toyota Corolla after installation
Car Radio Player for 2006-2012 Toyota Corolla after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2006-2012 Toyota Corolla car radio installation instruction

1. Remove the trim pieces above cup holder with a lever.

Remove the trim pieces above cup holder with a lever
Remove the trim pieces above cup holder with a lever

2. Remove 4 bolts behind the trim piece.

Remove 4 bolts behind the trim piece
Remove 4 bolts behind the trim piece

3. Gently pry around the side of trim panel and then remove the upper trim panel.

Gently pry around the side of trim panel and then remove the upper trim panel
Gently pry around the side of trim panel and then remove the upper trim panel

4. Gently pry around the side of bottom trim panel and take out the original radio.

Gently pry around the side of bottom trim panel and take out the original radio
Gently pry around the side of bottom trim panel and take out the original radio

5. Disconnect the smaller harness on the behind of the original car radio.

Disconnect the smaller harness on the behind of the original car radio
Disconnect the smaller harness on the behind of the original car radio

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original car radio’s plugs.

9. Install four screws and trim panel.

10. Install the trim piece.

11. Turn on the new radio and have a comprehensive test if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

 

Before installation, please make clear every detailed specific step and your car mode and related compatible replacement radio system. If you have any doubts, please don’t hesitate to consult your dealer for seeking valuable advice. If you are still searching for an ideal car radio, here I would like to share a remarkable Seicane Android 6.0 Multimedia Autoradio GPS Navigation System for 2006-2012 Toyota Corolla with you. For more details, please click:

https://www.seicane.com/android-4-2-multimedia-autoradio-dvd-system-for-2006-2012-toyota-corolla-with-gps-touch-screen-3g-wifi-1080p-mirror-link-obd2-k76288

Loaded with the advanced and stable Android 6.0 operation system and a high-quality quad-core CPU processor, this amazing car radio can bring you the excellent fluent using experience.

Built in GPS module with dual zone function, you can get to anywhere with accurate guidance easily. At the same time, Bluetooth chips built inside makes it support Bluetooth hands-free call, and Bluetooth streaming music playing from phone. Equipped with 4G,Wi-Fi, it can be connected to Wifi spot anytime .

Additionally, it also supports DVR, 1DIN DVD or OBDII as an option function.

Wish you like this unit and good luck to you!

The Quick Upgrade and Install Instruction for a 2013 2014 2015 2016 BMW 2 Series F22/F45 MPV NBT GPS Navigation Bluetooth Car Radio

Posted on by — No Comments ↓ 2,797 views
2013 2014 2015 2016 BMW 2 Series F22 F45 MPV NBT car radio after installation

When you drive your car out for a self-driving travel with your families or friends, you must want to play some music, TV programs or movies to make all of you relaxed on the way. Under this circumstance, it is essential for you to install a multifunctional head unit with entertainment features which can add a lot of fun to your long tedious trip. The following is a 2013 2014 2015 2016 BMW 2 Series F22/F45 MPV NBT car radio installation guide from Seicane with you. If you have the same or similar dashboard, you can take it as a reference.

2013 2014 2015 2016 BMW 2 Series F22 F45 MPV NBT car radio after installation
2013 2014 2015 2016 BMW 2 Series F22 F45 MPV NBT car radio after installation

Before and during installation, you should notice:

1. Before connecting,please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire,so when replace the fuse, please consult the professional.

7. For your convenience, here’s there commended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2013 2014 2015 2016 BMW 2 Series F22/F45 MPV NBT car radio installation guide

1. The original car radio.

The original car radio
The original car radio

2. Use a pry tool to loose the air vent and then remove the air vent.

Use a pry tool to loose the air vent and then remove the air vent
Use a pry tool to loose the air vent and then remove the air vent

3. Unplug the connectors at the back of the air vent.

Unplug the connectors at the back of the air vent
Unplug the connectors at the back of the air vent

4. Use a screwdriver to remove the screws that fix the radio panel.

Use a screwdriver to remove the screws that fix the radio panel
Use a screwdriver to remove the screws that fix the radio panel

5. Take out the panel.

Take out the panel
Take out the panel

6. Disconnect the connectors at the back of the panel.

Disconnect the connectors at the back of the panel
Disconnect the connectors at the back of the panel

7. Use a screwdriver to remove the screws of the radio and then pull out the original car radio.

Use a screwdriver to remove the screws of the radio and then pull out the original car radio
Use a screwdriver to remove the screws of the radio and then pull out the original car radio

8. Unplug the connectors or cables at the back of the car radio.

Unplug the connectors or cables at the back of the car radio
Unplug the connectors or cables at the back of the car radio

9. Remove the two screws that fix the display and then remove the display.

Remove the two screws that fix the display and then remove the display
Remove the two screws that fix the display and then remove the display

10. Check all the accessories for the new Seicane car radio.

11. Connect the harnesses to the back of the new Seicane car radio.

12. Connect the Seicane car radio to your original radio’s plugs.

13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14. Put the new Seicane car radio into the dash.

15. Put everything into their original place. All the installation is done.

 

Now can you understand all the steps mentioned and learn some skills to help install your new car radio all by yourself? If you still have any doubts, you can contact your dealer, communicate with someone experienced or turn to a professional for help. And moreover, you can directly go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to select an ideal car radio for your beloved car. Here I would like to share a remarkable 2013 2014 2015 2016 BMW 2 Series F22/F45 MPV NBT car radio from Seicane with you. For more details, please click:

https://www.seicane.com/hd-touchscreen-android-2013-2016-bmw-2-series-f22-f45-mpv-nbt-car-stereo-radio-head-unit-gps-navigation-bluetooth-phone-mp3-support-steering-wheel-control-wifi-backup-camera-s028202

This car radio is running with the stable Android operation system and powerful CPU processor, which will enables you to embrace a much smoother, faster and easier operation experience. Since this car radio comes with a wide range of practical and entertainment features, almost all your different needs can be met in your beloved car. These comprehensive features are mainly including high-end 3D GPS navigation system, Bluetooth hands-free calls, Bluetooth music,FM/ AM radio tuner, USB & SD connection, etc. What’s more, apart from these features, there are also some optional functions being supported to be added to this unit according to your preference, such as car DVR, backup camera, OBD2, CarPlay dongle and so on forth. As long as you make full advantage of these modern features, you are able to improve both your in-car environment and gain a brand new driving experience.

Wish you have a wonderful driving experience accompanied by this amazing car radio.

Upgrade and Installation Tutorial for a 2009 2010 2011 2012-2015 BMW X1 E84 GPS Navigation Bluetooth Audio Car Radio

Posted on by — No Comments ↓ 3,713 views
2009 2010 2011 2012-2015 BMW X1 E84 Car Stereo after installation

As a car owner, you must want to create a convenient and relaxing in-car environment and own a wonderful driving experience. To achieve this goal, you can install a new multifunctional car radio to replace your factory radio which is incompatible with a range of modern features. Here I would like to introduce a detailed Seicane car radio installation guide for a 2009 2010 2011 2012-2015 BMW X1 E84 car radio with you. If you have the same or similar dashboard, you can refer to this guide carefully.

2009 2010 2011 2012-2015 BMW X1 E84 Car Stereo after installation
2009 2010 2011 2012-2015 BMW X1 E84 Car Stereo after installation

Precautions for this installation:

1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2. Please make sure that all fastened wires are isolated with electrical tape.

3. Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2009 2010 2011 2012-2015 BMW X1 E84 car radio installation guide

1. Use a plastic removal tool to pry the air-conditioning vent panel.

Use a plastic removal tool to pry the air-conditioning vent panel
Use a plastic removal tool to pry the air-conditioning vent panel

2. Gently remove the hazard button.

Gently remove the hazard button
Gently remove the hazard button
2-1
2-1

3. After remove the screws that fix the top panel, gently take out this panel.

After remove the screws that fix the top panel, gently take out this panel
After remove the screws that fix the top panel, gently take out this panel
3-1
3-1

4. Use the removal tool to pop out the panel beside the gear shift.

Use the removal tool to pop out the panel beside the gear shift
Use the removal tool to pop out the panel beside the gear shift

5. Remove the air-conditioning panel with the help of the removal tool.

Remove the air-conditioning panel with the help of the removal tool
Remove the air-conditioning panel with the help of the removal tool

6. Disconnect the connectors and plugs at the back of the climate control panel.

Disconnect the connectors and plugs at the back of the climate control panel
Disconnect the connectors and plugs at the back of the climate control panel

7. Unscrew the screws that fix the original car radio with a screwdriver.

Unscrew the screws that fix the original car radio with a screwdriver
Unscrew the screws that fix the original car radio with a screwdriver

8. Pull out the original car radio.

Pull out the original car radio
Pull out the original car radio

9. Unplug the connectors and cables at the back of the car radio.

Unplug the connectors and cables at the back of the car radio
Unplug the connectors and cables at the back of the car radio

10. Check all the accessories for the new Seicane car radio.

11. Connect the harnesses to the back of the new Seicane car radio.

12. Connect the Seicane car radio to your original radio’s plugs.

13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14. Put the new Seicane car radio into the dash.

15. Put everything into their original place. All the installation is done.

 

Wish you can achieve the whole removal and installation process after reading the above instruction. If you have any difficulties that you do not know how to overcome, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Anyway, before installation, please make sure that you’ve already got an ideal car radio for your beloved car. If you don’t have, here I would like to share a remarkable 2009 2010 2011 2012-2015 BMW X1 E84 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/hd-touchscreen-android-2009-2015-bmw-x1-e84-with-monitor-cic-aftermarket-radio-head-unit-car-stereo-gps-navigation-system-bluetooth-phone-support-wifi-dvr-steering-wheel-control-s028239

Your driving experience will be improved to a large extent if you install this car radio in your car. This car radio can offer you the best service due to its higher configuration and performance.

With the assistance of the worldwide real-time GPS navigation system, you can easily locate where you are currently and get the optimal route option to reach any locations you would like to go to according to the turn-by-turn directions and voice prompts. And this unit comes with dual zone function, which enables you to listen to your favorite music while navigating.

Additionally, through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you can freely get access to Bluetooth hands-free phone calls as well as Bluetooth streaming music without taking your hands off the steering wheel control. Thanks to this function, you will gain a lot of convenience and entertainment.

Wish you like this unit. Good luck to you!