Home › 2017 › November

Monthly Archives: November 2017

How to Replace a 2008 2009 2010 Jeep Commander Car Radio with Stereo Audio Speakers in a Quick Way

Posted on by — 4 Comments ↓ 6,249 views
2008 2009 2010 Jeep Commander Car Radio after installation

If you are an owner of a 2008 2009 2010 Jeep Commander and happen to plan to replace your factory radio with a brand new multifunctional car radio, you may need a correct installation instruction to help you. This article is mainly about a 2008 2009 2010 Jeep Commander car radio installation instruction, which may help you gain a general understanding of the old radio removal and the new car radio installation. Wish it is helpful for you to some extent.

2008 2009 2010 Jeep Commander Car Radio after installation
2008 2009 2010 Jeep Commander Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008 2009 2010 Jeep Commander car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Remove the panel by prying the edges with a lever.

Remove the panel by prying the edges with a lever
Remove the panel by prying the edges with a lever

3. Unscrew four screws holding the original radio in place with a screwdriver.

Unscrew four screws holding the original radio in place with a screwdriver
Unscrew four screws holding the original radio in place with a screwdriver

4. Take the original radio out of the dash.

Take the original radio out of the dash
Take the original radio out of the dash

5. Disconnect the connectors at the back of the original radio.

Disconnect the connectors at the back of the original radio
Disconnect the connectors at the back of the original radio

6. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo
Check all the accessories for the new Seicane car stereo

7. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo
Connect the harnesses to the back of the new Seicane car stereo

8. Connect the Seicane car stereo to your original car radio’s plugs.

9. Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane stereo into the dash.

11. Put everything into their original place.

 

Wish the above installation steps can be helpful for you to some extent. If you meet any problems and don’t know how to deal with, you can seek help from your dealer, someone experienced or a professional. Anyway, before installation, it is crucial to select an ideal car radio. If you don’t know which kind of car radio can fit your car well, you can check out the following link which is an excellent 2008 2009 2010 Jeep Commander car radio from Seicane.

https://www.seicane.com/android-radio-2008-2009-2010-jeep-commander-gps-navigation-bluetooth-usb-wifi-dvd-player-support-1080p-video-dvr-obd2-rearview-camera-steering-wheel-control-s6933

With this car radio installed in your car, you will able to embrace a smoother, easier and faster operation experience since this car radio runs on the advanced and stable Android 7.1 operation system and a powerful quad-core CPU processor to enhance and improve its capabilities and performance.

The worldwide real-time GPS navigation system is especially built in this car radio, so you don’t need to worry about getting lost any more even you have no good sense of directions. Through the turn-by-turn directions and voice prompts, you are able to easily know your current locations and find the most suitable way to reach your desired destinations.

Additionally, under Bluetooth technology, you are able to connect your Bluetooth-enabled mobile phone to this car radio so as to get access to Bluetooth hands-free phone calls for convenience and Bluetooth streaming music for enjoyment. Thus, you will gain a safer, more convenient and relaxing driving.

If you like this unit, just add it to your shopping cart right now. Good luck to you!

How to Remove a 2010 2011 2012 2013 Mazda 5/Premacy Car Radio to Install a Touch Screen Radio Stereo Navigation System

Posted on by — 2 Comments ↓ 5,877 views
2010 2011 2012 2013 Mazda 5 Premacy Car Radio after installation

There is no doubt that to have both a comfortable car interior environment and a relaxing driving experience is what most car owners are pursuing at present. And to achieve that goal, it is wise of you to think about replacing your factory radio with a new aftermarket car radio. The following is a 2010 2011 2012 2013 Mazda 5/Premacy car radio installation guide. If you have the same or similar dashboard, you can refer to the following guide and take it as a reference.

2010 2011 2012 2013 Mazda 5 Premacy Car Radio after installation
2010 2011 2012 2013 Mazda 5 Premacy Car Radio after installation

Here are some tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and www.seicane.com make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400

2010 2011 2012 2013 Mazda 5/Premacy car radio installation guide

1. Unclip and remove the cup holder panel in the center console.

Unclip and remove the cup holder panel in the center console
Unclip and remove the cup holder panel in the center console
1-1
1-1

2. Unclip and remove the small pocket panel on the back of the center console behind shifter.

Unclip and remove the small pocket panel on the back of the center console behind shifter
Unclip and remove the small pocket panel on the back of the center console behind shifter
2-1
2-1
2-2
2-2

3. Remove two 8mm bolts under the cup holder panel holding the back half of the center console to the front half.

Remove two 8mm bolts under the cup holder panel holding the back half of the center console to the front half
Remove two 8mm bolts under the cup holder panel holding the back half of the center console to the front half

4. Unscrew the shift knob and remove it carefully.

Unscrew the shift knob and remove it carefully
Unscrew the shift knob and remove it carefully

5. Unclip and remove the shifter trim panel.

Unclip and remove the shifter trim panel
Unclip and remove the shifter trim panel

6. Slide both seats forwards and remove two Phillips screws on each side of the center console under the screw covers.

Slide both seats forwards and remove two Phillips screws on each side of the center console under the screw covers
Slide both seats forwards and remove two Phillips screws on each side of the center console under the screw covers
6-1
6-1

7. Unclip and pull back the panels at the lower front sides of the center console.

Unclip and pull back the panels at the lower front sides of the center console
Unclip and pull back the panels at the lower front sides of the center console

8. Remove two Phillips screws from both sides(total of four) of the front lower half of the center console.

Remove two Phillips screws from both sides(total of four) of the front lower half of the center console
Remove two Phillips screws from both sides(total of four) of the front lower half of the center console
8-1
8-1

9. Unclip and remove the vent panel including the hazard switch above the factory radio. Then it will be much easier for you to get access to the screws. And remove the two screws.

Unclip and remove the vent panel including the hazard switch above the factory radio. Then it will be much easier for you to get access to the screws. And remove the two screws
Unclip and remove the vent panel including the hazard switch above the factory radio. Then it will be much easier for you to get access to the screws. And remove the two screws
9-1
9-1
9-2
9-2

10. Remove two screws from behind the shifter trim.

Remove two screws from behind the shifter trim
Remove two screws from behind the shifter trim
10-1
10-1

11. Pull center console forward so as to gain access to two screws under the climate controls. And then remove these two screws.

Pull center console forward so as to gain access to two screws under the climate controls. And then remove these two screws
Pull center console forward so as to gain access to two screws under the climate controls. And then remove these two screws
11-1
11-1

12. Unclip harness and pull rear center console backwards.

Unclip harness and pull rear center console backwards
Unclip harness and pull rear center console backwards

13. Press in shifter to release trigger and pull shifter down, make sure to have a brake on.

Press in shifter to release trigger and pull shifter down, make sure to have a brake on
Press in shifter to release trigger and pull shifter down, make sure to have a brake on

14. Use a pry tool to release climate controls.

Use a pry tool to release climate controls
Use a pry tool to release climate controls

15. Remove one screw and one 10mm bolt.

Remove one screw and one 10mm bolt
Remove one screw and one 10mm bolt

16. Pull factory radio out, release clips and unplug radio connectors.

Pull factory radio out, release clips and unplug radio connectors
Pull factory radio out, release clips and unplug radio connectors

17. Check all the accessories for the new Seicane car radio.

18. Connect the harnesses to the back of the new Seicane car radio.

19. Connect the Seicane car radio to your original car radio ‘s plugs.

20. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

21. Put the new Seicane radio into the dash.

22. Put everything into their original place. All the installation is done.

 

Now do you have a general understanding of 2010 2011 2012 2013 Mazda 5/Premacy car radio installation? If not, please feel free to seek advice from your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. Anyway, before installation, please do select an ideal car radio. If you have no ideas, you can refer to the following link which is an amazing 2010 2011 2012 2013 Mazda 5/Premacy car radio from Seicane.

https://www.seicane.com/hd-touchscreen-android-gps-navigation-car-radio-dvd-player-for-2010-2013-mazda-5-premacy-with-bluetooth-canbus-usb-wifi-obd2-dvr-aux-mirror-link-steering-wheel-control-s18m015

This car radio comes with a wide range of practical and entertainment features to meet your different needs in car. So it can be regarded as one of the best choices to replace your factory radio.

After you get this car radio installed in your car, you can make full use of its built-in GPS navigation system of high accuracy. Through the text-to-speech guidance, you can easily locate where you are and accurately navigate to any locations you would like to go to.

Besides, as long as you connect your Bluetooth-enabled mobile phone to this unit through Bluetooth connection, you can dial, answer, reject or mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music without taking your hands off the steering wheel.

If you like this unit, just add it to your shopping cart. Good luck!

How to Effectively Replace a 2015 2016 2017 JEEP Wrangler Car Radio with DVD Player Bluetooth GPS Navigation System

Posted on by — No Comments ↓ 5,215 views
2015 2016 2017 JEEP Wrangler Car Radio after installation

Would you like to enjoy more up-to-date features brought by an ideal car radio in your car while you are driving? If yes, why not think about replacing your factory radio with a new multifunctional car radio. If you have a 2015 2016 2017 JEEP Wrangler and plan to install a new aftermarket car radio so as to embrace a brand new driving experience, then you can take the following related installation guide as a reference. Wish you can get some help from the guide.

2015 2016 2017 JEEP Wrangler Car Radio after installation
2015 2016 2017 JEEP Wrangler Car Radio after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2015 2016 2017 JEEP Wrangler car radio installation instruction

1. Get the window control out of the original place, so that you can get access to the screw that is behind it.

Get the window control out of the original place, so that you can get access to the screw that is behind it
Get the window control out of the original place, so that you can get access to the screw that is behind it

2. Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control.

Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control
Here we use a precision flat-head screwdriver with cotton cloth, which make sure it not to scratch the window control
2-1
2-1

3. You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out.

You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out
You may start from the corner, which makes it easier for you to get behind and you should be able to pop it up and make it come right out
3-1
3-1

4. There is a clip and you need to push it down and make it come right off, after that, put this window control to the side.

There is a clip and you need to push it down and make it come right off, after that, put this window control to the side
There is a clip and you need to push it down and make it come right off, after that, put this window control to the side
4-1
4-1
4-2
4-2
4-3
4-3

5. Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray.

Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray
Use a seven millimeter screwdriver socket to remove the bolt behind the window control and the in the upper tray
5-1
5-1
5-2
5-2

6. Next you are going to pull away the trim under the steering wheel.

Next you are going to pull away the trim under the steering wheel
Next you are going to pull away the trim under the steering wheel
6-1
6-1

7. With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set.

With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set
With the trim removed, you are going to remove two bolts on either side of the steering column with a seven millimeter socket set

8. Firmly pull the dash and it should be clipped out.

Firmly pull the dash and it should be clipped out
Firmly pull the dash and it should be clipped out
8-1
8-1

9. With the dash removed, you now can have access to the four bolts that are holding the original car radio.

With the dash removed, you now can have access to the four bolts that are holding the original car radio
With the dash removed, you now can have access to the four bolts that are holding the original car radio

10. Remove these four bolts with the seven millimeter screwdriver.

Remove these four bolts with the seven millimeter screwdriver
Remove these four bolts with the seven millimeter screwdriver

11. With all the bolts removed, the original car radio should simply slide out from the original place.

With all the bolts removed, the original car radio should simply slide out from the original place
With all the bolts removed, the original car radio should simply slide out from the original place
11-1
11-1

12. Disconnect the factory connectors and wires at the back of the original car radio.

Disconnect the factory connectors and wires at the back of the original car radio
Disconnect the factory connectors and wires at the back of the original car radio

13. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

14. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

15. Connect the Seicane car radio to your original radio’s plugs.

16. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane car radio into the dash.

18. Put everything into their original place. All the installation is done.

 

Above is the whole removal and installation process for a 2015 2016 2017 JEEP Wrangler. If you have any doubts, please don’t hesitate to seek help from your dealer, someone experienced or a professional. Besides, it is essential for you to pick an ideal car radio for your car. If you have no ideas, here I would like to recommend a remarkable 2015 2016 2017 JEEP Wrangler car radio from Seicane to you. For more details, please click:

https://www.seicane.com/en/android-touchscreen-radio-for-2015-2017-jeep-wrangler-bluetooth-music-gps-navigation-head-unit-support-mirror-link-dab-obdii-usb-tpms-3g-wifi-steering-wheel-control-1080p-video-s04155

This car radio will enable you to have a brand new in-car life since its operation system has been upgraded to the latest and stable Android 6.0 version and it has a powerful quad-core CPU processor.

Under the guidance of the worldwide real-time GPS navigation system, you are allowed to easily locate where you are and have the most suitable route option to arrive at your ideal destinations according to turn-by-turn directions and voice prompts. Besides, thanks to this unit’s dual zone function, you can freely enjoy your favorite music under GPS mode and the music will intelligently switch to GPS voice, which won’t have any negative influence on GPS function.

Besides, this unit comes with a very large 10.1 inch 1024*600 multi-touch screen to provide  you a wide field of viewing.

Wish you like this unit and good luck to you!

The Quick Tutorial on a 2011 2012 KIA K2 RIO Car Radio Installation with Bluetooth GPS Navigation System

Posted on by — No Comments ↓ 2,530 views
2011 2012 KIA K2 RIO Car Radio after installation

To enrich your in-car life or take your in-car life up a level, you can easily replace your factory radio with a new aftermarket car radio. There is no doubt that an ideal car radio can make you enjoy more convenience and enjoyment. If you have some related installation, you can follow the related installation guide to deal with the installation. The following is a 2011 2012 KIA K2 RIO car radio installation instruction which can be taken as your reference.

2011 2012 KIA K2 RIO Car Radio after installation
2011 2012 KIA K2 RIO Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2011 2012 KIA K2 RIO car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Use a plastic removal tool to release the top panel.

Use a plastic removal tool to release the top panel
Use a plastic removal tool to release the top panel

3. Pry the trim panel of the radio with a plastic knife and remove it.

Pry the trim panel of the radio with a plastic knife and remove it
Pry the trim panel of the radio with a plastic knife and remove it
3-1
3-1

4. Unscrew the screws that are holding the radio on the dashboard.

Unscrew the screws that are holding the radio on the dashboard
Unscrew the screws that are holding the radio on the dashboard

5. Take out the radio gently.

Take out the radio gently
Take out the radio gently

6. Unplug the connectors and cables at the back of the radio.

Unplug the connectors and cables at the back of the radio
Unplug the connectors and cables at the back of the radio

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Wish you can learn something useful from the above installation instruction. If you meet any difficulties you don’t know how to overcome, you might as well seek help from your dealer, someone experienced or a professional. Or you can directly arrange a professional technician to help you install the new car radio. Additionally, to help you select a suitable car radio, here I would like to share a marvelous 2011 2012 KIA K2 RIO car radio from Seicane with you. Here comes the related link, please click:

https://www.seicane.com/android-touchscreen-2011-2012-kia-k2-rio-radio-gps-navigation-system-with-dvr-bluetooth-steering-wheel-control-backup-camera-mirror-link-obd2-digital-tv-s18k212

This remarkable car radio with a large 9 inch screen is loaded with the intelligent Android 7.1 operation system, a quad-core 1.6 GHz RK-PX3 CPU processor and 2GB RAM to enable you to enjoy its higher capabilities and performance.

Under the guidance of the turn-by-turn directions and voice prompts offered by the built-in precise GPS navigation system, it will become much easier for you to know your current locations and navigate to any locations you would like to go to. And this unit’s dual zone function enables you to listen to your favorite music while navigating, which won’t have any negative influence on GPS function.

Through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, without taking your hands off the steering wheel, you are able to dial, answer, reject and mute hands-free calls as well as listen to beautiful music streaming from your phone. By doing so, you will gain a lot of convenience and enjoyment.

Wish you enjoy your relaxing trip accompanied by this car radio. Good luck!

Skills to Replace a 2012 2013 Toyota CAMRY GPS DVD Bluetooth Car Radio

Posted on by — No Comments ↓ 2,902 views
2012 2013 Toyota CAMRY GPS DVD Bluetooth Car Radio after installation

As the technology greatly improves, nowadays a car radio is usually compatible with more and more modern features. If you think your factory radio is out of date, it is suggested that you replace it with a new aftermarket car radio. This article is mainly about how to remove the factory radio and install the new car radio for 2012 2013 Toyota CAMRY. If you happen to own the same or similar dashboard, you can refer to it to deal with the installation.

2012 2013 Toyota CAMRY GPS DVD Bluetooth Car Radio after installation
2012 2013 Toyota CAMRY GPS DVD Bluetooth Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts (Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

2012 2013 Toyota CAMRY car radio installation instruction

1. Remove the lower dashboard trim panels and the upper air conditioning vents.

Remove the lower dashboard trim panels and the upper air conditioning vents
Remove the lower dashboard trim panels and the upper air conditioning vents
1-1
1-1
1-2
1-2

2. Gently pry the upper dashboard housing from the radio’s trim bazel using either an automotive trim tool or your hands.

Gently pry the upper dashboard housing from the radio's trim bazel using either an automotive trim tool or your hands
Gently pry the upper dashboard housing from the radio’s trim bazel using either an automotive trim tool or your hands

3. After the upper dashboard housing has been disconnected, remove the two upper &two lower radio mounting screws from the dashboard.

After the upper dashboard housing has been disconnected, remove the two upper &two lower radio mounting screws from the dashboard
After the upper dashboard housing has been disconnected, remove the two upper &two lower radio mounting screws from the dashboard
3-1
3-1
3-2
3-2
3-3
3-3

4. Once the four radio mounting screws have been removed, gently lift the radio from the dashboard in order to gain access to the factory wiring harnesses on the backside.

Once the four radio mounting screws have been removed, gently lift the radio from the dashboard in order to gain access to the factory wiring harnesses on the backside
Once the four radio mounting screws have been removed, gently lift the radio from the dashboard in order to gain access to the factory wiring harnesses on the backside
4-1
4-1

5. Disconnect the connectors at the back of the radio.

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original radio’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Before installation, please confirm that you understand every detailed step. If you have any doubts, please don’t hesitate to seek help from your dealer, someone experienced or a professional. Or you can directly arrange a professional to help you install the new car radio. Anyway, first of all, it is essential for you to select an ideal car radio, here I would like to recommend an amazing 2012 2013 Toyota CAMRY car radio from Seicane to you.

https://www.seicane.com/full-touchscreen-2012-2013-toyota-camry-android-gps-navigation-system-with-radio-rearview-camera-4g-wifi-bluetooth-mirror-link-obd2-dvr-steering-wheel-control-s18t252

This car radio comes with a super large 10.2 inch HD 1024 x 600 multi-touch screen. Based on the most advanced Android 7.1 operation system and a high-quality quad-core 1.6GHz RK PX3 processor, this car radio can greatly facilitate the operation so as to provide its users with a brand new and wonderful operation experience.

Under the guidance of the turn-by-turn directions and voice prompts offered by the worldwide real-time GPS navigation system of high accuracy, you can easily know your current locations and have the optimal route option to reach your desired destinations. And you can also listen to radio, USB or SD card music playback while navigating thanks to this unit’s dual zone function.

Wish you like this unit and good luck to you!