A detailed Installation guide for 2010 2011 VW Volkswagen Passat(MK7) car Radio with TV Tuner DVR USB SD 1080P Video DVD Player Bluetooth 3G WIFI

Nowadays for car owners,not only the comfortable and safe driving experience is quite important but also to have a thing with many features to offer lots of fun and convenience such as a new car stereo. The following is the step-by-step installation and removal guide of 2010 2011 VW Volkswagen Passat(MK7) car Radio from Seicane.

2010 2011 VW Volkswagen Passat(MK7) car stereo after installation

2010 2011 VW Volkswagen Passat(MK7) car stereo after installation

Please note:

1.Before any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

 

  • 2010 2011 VW Volkswagen Passat(MK7) car Radioinstallation guide

Step1: Remove the trim panel.

Please pry around the trim panel with a lever and loosen the trim panel with one hand while prying.When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.

     

 

Step2: Remove the four screws on the radio.

Please unscrew the four screws at four corners.Then keep them well for the installation of a new head unit.

Step 2. Remove the four screws on the radio.

Step3: Take the factory radio out of the dash.

After the four screws are unscrewed, you can easily pull the factory radio out of the dash.

Step 3. Take the factory radio out of the dash.

Step4: Disconnect the wiring harness.

Please disconnect the wiring harness at the back of the factory radio before you put it aside.

Step 4. Disconnect the wiring harness.

 

Step 5: Connect the new Seicane stereo to the original wiring harness as the user manual or the wiring diagram shows.

 

Step 6: Turn on the new Seicane stereo to have a check if everything works well. Or please check whether all the cables are connected correctly.

Step 7: Put the new Seicane stereo into the dash and install the four screws.

 

Step 8: Install the trim panel into its original place.

 

  • According to the guide reference above , you may have a general idea about how to install a new aftermarket 2010 2011 VW Volkswagen Passat(MK7) car DVD player. You can ask the dealer or a professional for help if any questions. Meanwhile, it’s vital for you to confirm that your new Car GPS Navigation can fit your car. Also you can check the link below for more details about this modern 2010 2011 VW Volkswagen Passat(MK7) car Radio from Seicane.

https://www.seicane.com/android-dvd-radio-car-navigation-head-unit-for-2008-2013-vw-volkswagen-skoda-seat-with-3g-wifi-mirror-link-obd2-bluetooth

This high-end VW Volkswagen Passat(MK7) car Radio comes with come with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP ,etc. You can be on safe and delightful trips if simply sync with the smart phone,so that you are able to make and receive hands-free calls and stream music. Go ahead to take it right now and have a wonderful time from now on!

How to upgrade a 2005-2012 BMW 3 Series E90 E91 E92 E93 car stereo with DVD Player GPS Navigation System Radio Bluetooth 1080P Video TV Tuner   

Have you ever upgraded your factory radio before? If not, you will be greatly amazed at the different experience if you try to replace your factory radio with a new one. You may worry about the installation. Now I’d like to introduce a step-by-step 2005-2012 BMW 3 Series E90 E91 E92 E93 car stereo installation guide from Seicane to you as a reference.

2005-2012 BMW 3 Series E90 E91 E92 E93 car stereo after installation
2005-2012 BMW 3 Series E90 E91 E92 E93 car stereo after installation

 

Tips about the installation:

 

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

 

 

2005-2012 BMW 3 Series E90 E91 E92 E93 car stereo installation guide

  1. The original dashboard before installation.

    1. The original dashboard before installation.
    1. The original dashboard before installation.

 

  1. Pry the panel off with a lever. You need to lift the air-conditioning assembly and don’t pry the air-conditioning panel off directly.

    2. Pry the panel off with a lever. You need to lift the air-conditioning assembly and don't pry the air-conditioning panel off directly.
    2. Pry the panel off with a lever. You need to lift the air-conditioning assembly and don’t pry the air-conditioning panel off directly.

 

3.Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out.

  • 3-1.Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out.
    3-1.Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out.

    3-2.Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out.
    3-2.Unplug the air-conditioning assembly. Then unscrew the CD player and pull the CD player out.

 

  1. Disconnect the power plug behind the CD player and the plug of the radio aerials.
    4-1. Disconnect the power plug behind the CD player and the plug of the radio aerials.
    4-1. Disconnect the power plug behind the CD player and the plug of the radio aerials.

    4-2. Disconnect the power plug behind the CD player and the plug of the radio aerials.
    4-2. Disconnect the power plug behind the CD player and the plug of the radio aerials.

 

  1. Take off the plastic bracket frame behind the CD Player. Six screws are shown in the picture as follow. 4 of them are T20 screws, 2 of them are turnbuckles(no.8).

    5. Take off the plastic bracket frame behind the CD Player. Six screws are shown in the picture as follow. 4 of them are T20 screws, 2 of them are turnbuckles(no.8).
    5. Take off the plastic bracket frame behind the CD Player. Six screws are shown in the picture as follow. 4 of them are T20 screws, 2 of them are turnbuckles(no.8).

 

  1. Unscrew the 2 turnbuckles(no.8).After the removal, the bracket is not needed, because the DVD comes with its metal bracket panel.

    6. Unscrew the 2 turnbuckles(no.8).After the removal, the bracket is not needed, because the DVD comes with its metal bracket panel.
    6. Unscrew the 2 turnbuckles(no.8).After the removal, the bracket is not needed, because the DVD comes with its metal bracket panel.

 

7.Mount the metal bracket panel of DVD to the position where the factory CD bracket panel is dismounted.          Screw the 4T20 screws on.

  • 7-1.Mount the metal bracket panel of DVD to the position where the factory CD bracket panel is dismounted. Screw the 4T20 screws on.
    7-1.Mount the metal bracket panel of DVD to the position where the factory CD bracket panel is dismounted. Screw the 4T20 screws on.

    7-2.Mount the metal bracket panel of DVD to the position where the factory CD bracket panel is dismounted. Screw the 4T20 screws on.
    7-2.Mount the metal bracket panel of DVD to the position where the factory CD bracket panel is dismounted. Screw the 4T20 screws on.

 

  1. Connect the power plugs of DVD player and the CD player. Then connect the wires to the new Seicane stereo as t he user manual or the wiring diagram shows.
    8-1. Connect the power plugs of DVD player and the CD player. Then connect the wires to the new Seicane radio as t he user manual or the wiring diagram shows.
    8-1. Connect the power plugs of DVD player and the CD player. Then connect the wires to the new Seicane radio as t he user manual or the wiring diagram shows.

    8-2. Connect the power plugs of DVD player and the CD player. Then connect the wires to the new Seicane radio as t he user manual or the wiring diagram shows.
    8-2. Connect the power plugs of DVD player and the CD player. Then connect the wires to the new Seicane radio as t he user manual or the wiring diagram shows.

 

9.Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10.Put the new Seicane stereo into the dash.

11.Put everything into their original place.

 

That’s all the installation method about a 2005-2012 BMW 3 Series E90 E91 E92 E93 car stereo. To make sure you have a successful upgrade, you need to be clear about every step before the installation. You also need to confirm that your new car stereo can be compatible with your car. If you don’t have one, then I’d like to introduce a great 2005-2012 BMW 3 Series E90 E91 E92 E93 car stereo from Seicane to you, please check out for more details:

 

http://www.seicane.com/2005-2012-bmw-3-series-e90-e91-e92-e93-oem-dvd-player-gps-navigation-system-radio-bluetooth-1080p-video-tv-tuner-dvr-usb-sd-canbus-3g-wifi-rearview-camera-s127109d

 

With an advanced WINCE 6.0 CORE operation system, this BMW 3 Series E90 E91 E92 E93 car stereo comes with a variety of useful and amusing and features for you to get the convenience and enjoyment on the way, such as the 3D GPS navigation system of high precision, bluetooth technology, DVD player, FM/AM radio, Ipod, Wifi, USB, SD, etc. What’s more, your steering wheel control can still work after installation. To have a brand new experience, it’s just your best choice!