Home › 2016 › November

Monthly Archives: November 2016

Quick Steps on a 2003-2013 VW VolksWagen PASSAT Seat Skoda GPS Bluetooth Car Radio Upgrade With Stereo Sound System Backup Camera USB Connection

Posted on by — No Comments ↓ 3,610 views
2003-2013 VW VolksWagen PASSAT Seat Skoda GPS Bluetooth Car Radio after installation

You may realize that although your factory radio can play CD disks and radio to relax you sometimes, it cannot be compatible with some advanced features so that it cannot meet your most needs. Under this circumstance, it is wise for you to replace the factory radio with a new aftermarket car radio. Look at the picture below which is a Seicane 2003-2013 VW VolksWagen PASSAT Seat Skoda GPS Bluetooth Car Radio after installation. You can refer to the following installation guide if you have a same or similar dashboard in your car.

2003-2013 VW VolksWagen PASSAT Seat Skoda GPS Bluetooth Car Radio after installation
2003-2013 VW VolksWagen PASSAT Seat Skoda GPS Bluetooth Car Radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2003-2013 VW VolksWagen PASSAT Seat Skoda car radio installation guide

1. The original car radio.

The original car radio
The original car radio

2. Remove the radio frame.

Remove the radio frame
Remove the radio frame

3. Remove screws that are holding the original car radio.

Remove screws that are holding the original car radio
Remove screws that are holding the original car radio

4. Gently take out the original car radio.

Gently take out the original car radio
Gently take out the original car radio

5. Unplug connectors and cables at the back of the radio.

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

8. Connect the Seicane car radio to your original stereo’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

Wish you can gain valuable information from the above installation guide. If there is any question you cannot deal with independently, you can turn to your dealer or a professional for help. If you still think it too hard for you to install the car radio, you can just arrange a professional to install it directly. But before the installation, please confirm that you already have a suitable car radio. If not, you are recommended to click the link below which is about a 2003-2013 VW VolksWagen PASSAT Seat Skoda GPS Bluetooth Car Radio from Seicane.

http://www.seicane.com/9-inch-hd-touchscreen-2003-2013-vw-volkswagen-passat-seat-skoda-gps-navigation-system-android-3d-gps-navigation-radio-tuner-bluetooth-music-backup-camera-usb-obd2-s30901

This Seicane car radio is advanced enough to be an ideal replacement to upgrade your factory radio of 2003-2013 VW VolksWagen PASSAT Seat Skoda. When you turn on the GPS navigation function, you can be guided to find the best route to get to your desired destinations accurately through turn-by-turn direction and voice prompt. Under the Bluetooth technology, you can easily realize the connection between your enabled cell phone and this car radio so as to dial, receive or reject hands-free phone calls as well as enjoy streaming music from your phone music playlists, which promise you not only a safer but happier driving experience. Wish you like this fantastic car radio from Seicane. Good luck to you!

The Best Way to Upgrade a 2004-2010 CITROEN C4 navigation system head unit with Mirror Link Bluetooth Music OBD2 Backup Camera

Posted on by — 4 Comments ↓ 7,536 views
2004-2010 CITROEN C4 navigation system head unit after installation

First of all, please look at the following image. It is a 2004-2010 CITROEN C4 navigation system head unit after installation. It looks very wonderful, doesn’t it? Here I would like to introduce that how the car stereo installation is achieved. If you are interested in it or you also have a plan to replace your factory radio, you may read this article carefully. Perhaps you are able to learn something from it.

2004-2010 CITROEN C4 navigation system head unit after installation
2004-2010 CITROEN C4 navigation system head unit after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2004-2010 CITROEN C4 car stereo installation guide

1. The original car radio.

The original car radio
The original car radio

2. Remove the storage box; please use a removal tool if necessary.

3. Lift up the panel around the shift lever.

Lift up the panel around the shift lever
Lift up the panel around the shift lever

4. Remove the surrounding frame.

Remove the surrounding frame
Remove the surrounding frame

5. Unscrew the screws that fixed the AC control panel and then unplug the cables behind.

Unscrew the screws that fixed the AC control panel and then unplug the cables behind
Unscrew the screws that fixed the AC control panel and then unplug the cables behind
5-1
5-1

6. Plug the professional car dismantle tool into the CD player, take it out and unplug the connectors.

Plug the professional car dismantle tool into the CD player, take it out and unplug the connectors
Plug the professional car dismantle tool into the CD player, take it out and unplug the connectors

7. Remove the trim panel cover and unplug the connectors behind.

Remove the trim panel cover and unplug the connectors behind
Remove the trim panel cover and unplug the connectors behind

8. Check all the accessories for the new Seicane car stereo.

9. Connect the harnesses to the back of the new Seicane car stereo.

10. Connect the Seicane car stereo to your original stereo’s plugs.

11. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car stereo into the dash.

13. Put everything into their original place. All the installation is done.

 

With the above installation instruction, can you finish the 2004-2010 CITROEN C4 navigation system head unit installation? If there is any question, you can seek good advice from your dealer or someone experienced. If it is the first time for you to start your installation, you’d better ask a professional for help. Anyway, before the installation, please confirm that your new car stereo can fit well with your car. If it cannot work well in your car, you’d better make a better replacement. I would like to recommend a marvelous 2004-2010 CITROEN C4 navigation system head unit from Seicane. For more details, please click:

http://www.seicane.com/hd-touchscreen-2004-2010-citroen-c4-android-radio-dvd-player-gps-navigation-system-with-bluetooth-music-wifi-dab-mirror-link-obd2-backup-camera-s32691

With a large 7inch 1024*600 multi-touch screen, this intelligent car stereo can show you the best display of videos and view effect of navigation. Besides, there are also many practical and entertainment features which can improve your car interior environment and promise you a wonderful driving experience, including 3D GPS navigation system, Bluetooth music, DVD, FM/AM radio, Wi-Fi, etc. If you like this car stereo, just take it and have a ton of fun with it.

How to skillfully upgrade a 1998-2005 BMW E46 gps dvd Bluetooth stereo supports OBD2 DVR Radio

Posted on by — No Comments ↓ 3,610 views
1998-2005 BMW E46 gps dvd Bluetooth stereo after installation

When it comes to the installation of a car radio, some of you may think it can only be achieved by professionals with expertise especially for those who have tried before but failed. In fact, to install a car radio doesn’t require much expertise. If you have correct installation guide and some related experience, you can also succeed in such a job. Of course, you should make clear every step of the installation before you start it. The following comes a 1998-2005 BMW E46 gps dvd Bluetooth stereo installation instruction for you as a reference.

1998-2005 BMW E46 gps dvd Bluetooth stereo after installation
1998-2005 BMW E46 gps dvd Bluetooth stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

1998-2005 BMW E46 car radio installation instruction

1.The original car radio.

The original car radio
The original car radio

2.Remove the decoration strip, pry from the gap by using a flathead screwdriver.

Remove the decoration strip, pry from the gap by using a flathead screwdriver
Remove the decoration strip, pry from the gap by using a flathead screwdriver
2-1
2-1

3.Remove the two fixed screws from the original car radio.

Remove the two fixed screws from the original car radio
Remove the two fixed screws from the original car radio

4.Gently remove the original car radio.

Gently remove the original car radio
Gently remove the original car radio

5.Unplug the power speaker cable(by using a flathead screwdriver) and radio antenna.

Unplug the power speaker cable(by using a flathead screwdriver) and radio antenna
Unplug the power speaker cable(by using a flathead screwdriver) and radio antenna
5-1
5-1

6.Remove the air conditioning control panel. By putting two hands on the air conditioning control panel, and pull it out toward to your own direction.

Remove the air conditioning control panel. By putting two hands on the air conditioning control panel, and pull it out toward to your own direction
Remove the air conditioning control panel. By putting two hands on the air conditioning control panel, and pull it out toward to your own direction

7.Pull out the related wires.

Pull out the related wires
Pull out the related wires

8.Remove the air-conditioning vents. The vent is firmly fixed, press it by 2 thumbs and remove it when the vent come out.

Remove the air-conditioning vents. The vent is firmly fixed, press it by 2 thumbs and remove it when the vent come out
Remove the air-conditioning vents. The vent is firmly fixed, press it by 2 thumbs and remove it when the vent come out

9.Remove the final two screws from the frame, so as to take out the whole unit frame.

Remove the final two screws from the frame, so as to take out the whole unit frame
Remove the final two screws from the frame, so as to take out the whole unit frame

10. Take out the storage box inside, where to install with air conditioning control panel.

11. Check all the accessories for the new Seicane car radio.

12. Connect the harnesses to the back of the new Seicane car radio.

13. Connect the Seicane car radio to your original stereo’s plugs.

14. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

15. Put the new Seicane car radio into the dash.

16. Put everything into their original place. All the installation is done.

 

Is it easy enough for you to understand the above installation instruction for a 1998-2005 BMW E46 gps dvd Bluetooth stereo? Before you start your work, if you have any questions, you can consult your dealer for helpful advice. If you don’t have related experience before and still think it impossible for you to finish the installation, you’d better go to a car stereo upgrade centre to arrange a technician to install the new car radio for your car. To help you find a suitable car radio, I would like to recommend a 1998-2005 BMW E46 gps dvd Bluetooth stereo from Seicane to you. For more details, please click:

http://www.seicane.com/oem-dvd-player-radio-gps-navigation-system-for-1998-2005-bmw-e46-with-bluetooth-hd-1024-600-touch-screen-obd2-dvr-rearview-camera-tv-1080p-video-usb-sd-3g-wifi-steering-wheel-control-mirror-link-s167212

With this excellent 1998-2005 BMW E46 gps dvd Bluetooth stereo in your car, your driving experience will be taken up a notch in a large extent. The built-in 3D GPS navigation system enables you to go anywhere you’d like to through its text-to-speech. The large 8 inch HD 1024*600 multi-touch screen will bring you the best viewing effect when you turn on the DVD player to play movies or videos. The Bluetooth module allows you to make, receive or reject calls and enjoy streaming music without keeping your hands off the steering wheel. If you like it, don’t forget to add it to your cart. Good luck to you!

13 Steps to remove and install a 2005-2012 Mercedes Benz GL Class X164 gps car stereo with OBD2 DVR Rearview camera TV 1080P Video

Posted on by — No Comments ↓ 4,786 views
2005-2012 Mercedes Benz GL Class X164 gps car stereo after installation

With the rapid development and prevailing of online shopping, it is fairly easy to get an advanced car stereo with intelligent features. If you are being tired of your single-functional factory radio, it is wise of you to buy a brand new online and install it on your own which will save you a lot. This passage is about a step-by-step 2005-2012 Mercedes Benz GL Class X164 gps car stereo installation instruction from Seicane. If you own a 2005-2012 Mercedes Benz GL Class X164 gps car stereo, it suggests you to read it carefully.

2005-2012 Mercedes Benz GL Class X164 gps car stereo after installation
2005-2012 Mercedes Benz GL Class X164 gps car stereo after installation

 

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2005-2012 Mercedes Benz GL Class X164 gps car stereo installation instruction

1. The original car stereo.

The original car stereo
The original car stereo

2.Pry the bottoming panel out of the dash with a plastic knife.

Pry the bottoming panel out of the dash with a plastic knife
Pry the bottoming panel out of the dash with a plastic knife
2-1
2-1

3.Pry the air conditioner panel out and remove it.

Pry the air conditioner panel out and remove it
Pry the air conditioner panel out and remove it

4.Remove two screws that fixed the radio on the dashboard with a screwdriver.

Remove two screws that fixed the radio on the dashboard with a screwdriver
Remove two screws that fixed the radio on the dashboard with a screwdriver

5. Use your finger to pull the buckles down.

Use your finger to pull the buckles down
Use your finger to pull the buckles down
5-1
5-1

6.Gently pull the factory radio out of the dash.

Gently pull the factory radio out of the dash
Gently pull the factory radio out of the dash

7. Then unplug the connectors at the back of the factory radio.

Then unplug the connectors at the back of the factory radio
Then unplug the connectors at the back of the factory radio

8. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo
Check all the accessories for the new Seicane car stereo

9. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo
Connect the harnesses to the back of the new Seicane car stereo

10. Connect the Seicane car stereo to your original stereo’s plugs.

11. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car stereo into the dash.

13. Put everything into their original place. All the installation is done.

 

To have a successful installation, please make sure you are clear about every step before your installation. If you have any question, you can consult your dealer for suggestions. But if you don’t have some experience before and you think it too hard for you to achieve the whole installation, you’d better go to a car stereo upgrade centre and ask a technician to help you install it directly. If you are searching for a suitable car stereo online, you may check the link below which is about a remarkable 2005-2012 Mercedes Benz GL Class X164 gps car stereo from Seicane.

http://www.seicane.com/oem-gps-dvd-player-android-navigation-system-for-2005-2012-mercedes-benz-gl-class-x164-gl300-gl350-gl420-with-mirror-link-radio-hd-1024-600-touch-screen-obd2-dvr-rearview-camera-tv-1080p-video-3g-wifi-steering-wheel-control-usb-sd-s167219

This car stereo with the latest Android 5.1.1 operating system and a RK3188 1.6 GHz Cortex A9 Quad-core processor will be your best choice to upgrade your in-car environment. The accurate text-to-speech guidance of the GPS system makes it possible for you to find the best route to your ideal destination. With the aid of Bluetooth technology, you can have hands-free calls to keep safer and stream music to have fun. To please both you and your passenger, this unit allow you to play region-free DVDs, TV programs, FM/AM radio, etc, all the way. Just install this marvelous 2005-2012 Mercedes Benz GL Class X164 gps car stereo in your beloved car and enjoy your long journey from now on!