An ideal car radio plays a very important role in a car since it can help bring great convenience and entertainment all the way. If you are fed up with your factory radio due to its simple functions, you can think about replacing it with a brand new multifunctional car radio. If you own a 2013 2014 2015 2016 Toyota RAV4 and plan to upgrade your factory radio, you can refer to the following 2013 2014 2015 2016 Toyota RAV4 car radio installation instruction from Seicane. Wish you can get some help from this instruction.
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2013 2014 2015 2016 Toyota RAV4 car radio installation instruction
1. Using a plastic removal tool to remove the upper dashboard trim panel. Set the panel aside once removed.
2. Gently pry the air conditioning vents on the left and right-hand sides of the factory radio away from the dashboard.
3. Gently pry the clock display and hazard lamp panel away from the dashboard and set it to the side.
4. Remove the four retaining screws attaching the factory radio to the dashboard.
5. Gently lift the touch screen unit away from the dashboard and lean it to gain access to the wiring harness on the reverse side.
6. Disconnect the factory radio by unplugging the individual harnesses.
7. Check all the accessories for the new Seicane car stereo.
8. Connect the harnesses to the back of the new Seicane car stereo.
9. Connect the Seicane car stereo to your original stereo’s plugs.
10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11. Put the new Seicane car stereo into the dash.
12. Put everything into their original place. All the installation is done.
Don’t worry if you encounter any problems during the installation. To solve these problems, you can not only contact your dealer for a wiring diagram but also turn to a professional for help. Besides, if you still think it hard for you to install the new car radio, you can directly arrange a professional technician to help you. Anyway, it is essential for you to select an ideal car radio. If you have no ideas, you can check out the following link which is a remarkable 2013 2014 2015 2016 Toyota RAV4 car radio from Seciane.
This car radio is loaded with the latest and stable Android 7.1 operation system and a high-quality quad-core CPU processor to enhance its capabilities and improve its performance.
With the assistance of the high-end 3D GPS navigation system of this unit, you can easily locate where you are and find the right way to reach any locations you would like to go to according to turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to freely listen to your favorite music while navigating.
Additionally, by paring your Bluetooth-enabled mobile phone and this car radio, you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your mobile phone playlists. Therefore, you will get great convenience and enjoyment.
Wish you like this unit and enjoy your in-car life accompanied by this unit. Good luck to you!
Recent Comments