If your factory radio is too out-dated, in my opinion, it is wise of you to replace your factory radio with a brand new multifunctional car radio so that you can enjoy more convenience and enjoyment as well as embrace a brand new driving experience. The following is a 2009 2010 2011 2012-2016 NISSAN NV200 car radio installation instruction from Seicane which I would like to share with you. If you own the same or similar dashboard, you’d better refer to this instruction.
Some tips before the installation:
1. Please disconnect the power before the installation.
2. Please prepare a lever and a screwdriver before the removal and the installation.
3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2009 2010 2011 2012-2016 NISSAN NV200 car radio installation instruction
1. The original car radio.
2. Grab the ashtray and take it out.
3. Remove the metal platefrom the bottom.
4. Release this panel.
5.Push the button upwards to unsnap it.
6. Take out this panel softly.
7. Unscrew two screws fixed the radio frame.
8. Get your nails underneath to click off the radio frame.
9. Unscrew the screws holding the radio on the dashboard.
10. Take out the original car stereo and disconnect the connectors at the back of the stereo.
11. Check all the accessories for the new Seicane car stereo.
12. Connect the harnesses to the back of the new Seicane car stereo.
13. Connect the Seicane car stereo to your original stereo’s plugs.
14. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
15. Put the new Seicane car stereo into the dash.
16. Put everything into their original place. All the installation is done.
Wish the above installation steps can be helpful for you. If you have any doubts, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard to install the new car radio by yourself, you can directly ask a professional technician to help you with the installation. Besides, it is very essential for you to pick an ideal car radio. If you have no ideas, you can check out the following link which is an amazing 2009 2010 2011 2012-2016 NISSAN NV200 car radio from Seicane.
Above link related car head unit comes with RAM 2GB \ ROM 32GB \ CPU Quad-core \ Plug and play \ Support RDS, SWC,Carplay Android Auto Support etc. Certainly this one will works for your car and bring you joyful time with driving.
OR
This car radio comes with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Build-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP etc.
Even though you don’t have a good sense of directions, under the guidance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you can easily know your current locations and find the right way to reach any locations you would like to go to. What’s more, thanks to this unit’s dual zone function, you can freely listen to car radio, USB or SD card music playback under GPS mode.
Additionally, under the wireless Bluetooth technology, without taking your hands off the steering wheel, you can connect your Bluetooth-enabled mobile phone to this car radio, so you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from phone music playlists.
Wish you like this unit and good luck to you.
Recent Comments