How to upgrade 2012-2014 Chevrolet S10 Radio navigation system support Bluetooth Carplay rearview camera?

Do you still use your car radios for many years? Have you consider to have better voice for your receiver within minutes? The best option to answer these question is to upgrade your car stereo by yourself as it can save money and time. Especially if you are the owner of Chevrolet S10, the feed of paying cost can be reduced and you can have better sound quality in the car life. However, not every beginner know exactly about how to upgrade their head unit without any support. And here is an referred article for those who are interested in replacing the Chevrolet head unit Navigation System, which will show you the specific steps of installation.

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

2012 2013 2014 Chevrolet S10 stereo removal:

1.Gently lever the upper trim housing panel from the dash with a removal tool.

2.Lever edges of side panel,release and reposition the shifter.

3.Make out 2 screws(this screw and the other corresponding one) from the storage pocket,remove car storage.

4.Make out 4 screws which are on the accessory control panel.

5.When you remove this very tough panel you should be patient and the clips will loosen.,then let panel hang to side.

6.Make out 2 screws from radio control panel,unplug the radio control panel.

7.Take out the really strange blue clip absolutely before removing the other connector,and remove the latter one.

8.Get out 2 screws which are on the radio chassis,and remove the other 2 screws which are near the top of the stereo,in order to fasten the screen.

9.Make screen out by pulling,and get behind clip out.

10.There are still 2 screws on stereo,remove them from car head unit.

11.Take stereo and connectors out.

12.Read installation instructions that within you new bought stereo,precisely make cables connection between new stereo with car.

13.After correct connection,install your new unit into your car and turn on it to test whether your actions are all right.

13.Fix 2 screws to the stereo and install the dvd player in position.

14.Make 2 screws back to the place near top of the stereo,and 2 screws to radio chassis.

15.Make other parts back to original place and don’t forget to firm their screws back to them to fix corresponding machine.

These are the whole process of installing your Chevrolet radio and you may have better understanding about how to upgrade it. But if you still think it is hard for you to install, you can ask for a technical professional for help as they will provide you the best support. Or you can also search the internet for the answers, here I would like to shard a link of Chevrolet Android unit from Seicane, where you can find many car accessories here.

This product is built-in GPS module, which promise you will never get lost when you are driving. And you can also connect your phone to the radio as it has carplay function.

If you want to know more details please visit it now.