Home › 2022 › January

Monthly Archives: January 2022

How to install a Steering Wheel Audio Control Adapter in your car?

Posted on by — No Comments ↓ 980 views

Installing a new radio definitely can improve our driving life nowadays, However, sometimes when you install a new radio in your car, you will also lose the benefit of the handy controls built into the steering wheel.That’s because those are wired for the original stereo and you can’t just plug them into back of the new radio. To solve this problem, you can consider to install a special adapter by yourself, which will make those controls interface with the new stereo so that you can use them just like you did before. And the following overview of installing a Steering Wheel Control Adapter can take as the reference to help you to complete this task.

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

Installation Guide of Steering Wheel Control

Step 1: Popped off the top panel, then removed a couple of screws and pulled of the main dash panel exposing the radio.

Step 2:  Remove four more screws out from the side of the radio

Step 3: Open the wiring package and tape the wiring you need to use or cut them off

Step 4: Plug the black control cable and then connect one of those two brown wires to a wire on the back of your stereo.

Step 5: Use the Posi-Tap connectors to make all wiring connections between the adapter harness and your stereos.

Step 6:plug this stuff as shown back in.

Step 7: Plug our new adapter and wiring in this stuff as shown.

Step 8: Re-install your stereo and the adapter, then put the dash back together.

Step 9： Put the adapter out  through the bottom of the dash so you can see it.

Step 10: Programming the adapter by turning on the ignition first and then watch for the adapter to start flashing.

Step 11: hold down the volume button on the steering wheel and just wait as it run through its paces figuring out everything it needs to know.

Step 12: Wait until the adapter’s LED is stable (no longer flashing)

Once you’ve followed all these steps instruction above, you can test the buttons to make sure whether your radio and the adapter can work. If you still find it too difficult for you to finish it, you can ask for a professional to give you the proper advice. As far as I am concerned, I would like to search for Internet to find my answers as there are many free resources available here. And here I would like to share a link of wireless steering wheel controller, which can fit for most car DVD GPS Navigation System.

This controller, integrated with the features of steering wheel control and navigation remote control, is upgraded to be more advanced than ever before. It comes with soft buttons and supports wireless luminous steering wheel control.

If you want to know more details about Steering Wheel Control and its related product, please click and visit it at once!

Useful Installation Manual for BMW 7 Series F01 Head Unit with Carplay Android Auto

Posted on by — No Comments ↓ 59 views

As the user of BMW, perhaps you have been familiar to take good care of your car as well as your collections, However, there is one decisive point that can play an important role in your driving life, which is the new head unit itself, bringing you pretty much fun during the driving experience. Therefore, many user of BMW would choose to upgrade their receiver for the high-vehicle car by themselves not only because it can save some budget but also it doesn’t take much time to complete it. Only a few people know exactly how to install their new touch screen and the following useful Installation guide of BMW 7 Series F01 Radio with Carplay Android Auto would definitely give you help and anyone without experience can take it as good reference.

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

Useful Installation of Navigation System for BMW 7 Series 2009-2012

1.Lever air outlet panel from the both right and the left sides.

2.Disconnect the wiring and take off the screws on both sides.

3.Pull out the frame of OEM screen and disconnect the wiring of the OEM screen.

4.Take off the screws on the both sides.

5.Lever AC panel from the left and to the right.

6.Unplug the connectors on the left side and take off the connectors on the right side.

7.Take off the screws on the both sides.

8.Pull out OEM head unit and Unplug the main power cable.

9.Unplug the fiber optical connector and connect the unplugged fiber optical connector with new wiring.

10.Connect OEM male connector with new female connector.

11.Connected the wiring behind the original radio.

12.Adjust all connectors and place them right.

13.Install the CD unit and fix the screws.

14.Plug the new wires of speakers on the screen and connect LVDS connectors.

15..Install the new screen and fix the screw on the both sides.

16.Connect all the cables and put the AC vent board back.

17.Fix the 2 screws and the AC panel.

Until now you should have been clear about how to replace your car audio in your BMW 7 Series and don’t forget to check the functions of your radios and see whether it can perform as the original one as well. If you have any doubt during this procedure, you should ask for a professional for help as they will give you the proper advice at once or you can go to the online service and buy it at your cost . As far as I am concerned, I would like to recommend one of the famous brand—Seicane,  which has been making Android  units over ten years in China, its new product of BMW 7 Series Installation can give you wonderful entertainment in your car.

There are two configurations you can opt for, one is with 4-core CPU, 2GB+32GB, 30EQ DSP; another is with 8-core CPU, 4GB+64GB, 16 EQ DSP, both are Android 10.0 system and can offer stable performance, just buy at your budget.

On the whole, don’t miss this chance if you love it and you will find more surprise than you can imagine !

How to upgrade 2012-2015 Ford Focus Android Units conveniently?

Posted on by — No Comments ↓ 410 views

As we all know, a large touchscreen radio system adds value to our cars as well as improves our in-car life. When we are bored in a long drive, we can use the radio system to enjoy songs, videos. For those who can’t park car easily, with the help of clear rear images shown by the big radio screen, they will park the car easier than before. However, not every car comes with such amazing radio system, if your factory radio can’t do these, it’s high time for you to upgrade it. Upgrading the whole radio system sometimes will be a very difficult job, but if you are the owner of Ford Focus, there is a super easy way to upgrade your radio, that is to install an Android radio screen.

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever or a screwdriver before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

2012-2015 Ford Focus Radio Installation Instruction

Step 1.Remove one bar under the radio with a plastic removal tool.

Step 2.Remove two screws that fixed the trim panel.

Step 3.Gently take out the trim panel.

Step 4.Remove screws fixed the radio.

Step 5.Pull out the original car radio.

Step 6.Unplug the connectors at the back of the car radio.

Step 7.Check all the accessories for the new stereo.

Step 8.Connect the harnesses to the back of the new audio.

Step 9.Connect the new car touch screen to your original radio’s plugs.

Step 10.Turn on the new car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

Step 11.Put the new unit into the dash and everything into their original place.

As the beginner, if you don’t have any idea about how to install your new radios, I believe you will learn a lot by these 11 steps above. After finishing it, please check all of the wires has been connected and all of the functions can be perform as well. If you meet some difficulties during this procedure, you can consult for a professional for help or search the tutorials from the websites. And there are some websites I would like to share with you , particularly for those who has purpose to buy some car audios online, Seicane always offer the fastest and safest service online and provide good package for many customers. Recently , the new double din dedicated Radio for 2012-2015 Ford Focus vehicles just been released and appeal to much attention at the same time. If you want to find a product to replace your original one, this one would be a good choice for you .

Equipped with an Android 10.0 system, 8-core CPU, being able to keep smooth operation and stable performance. If you want a Tesla style radio, this unit would be best choice, you can get it at affordable price within $250.

The fact is that an upgraded car radio helps improve our driving experience and no matter what’s your reason, you are always benefited from our car radios. Don’t hesitate to contact us whenever you need, just visit our pages and you will find many interesting receivers that meet your need.

How to replace the Radio in your BMW 5 Series?

Posted on by — No Comments ↓ 966 views

In your BMW, the radio may no longer work if you’ve had the vehicle for a long time. While BMW makes high-quality automobiles, sometimes the radio receivers are the low-end versions of popular models. Once you’ve opted your new radio, you’ll need to know how to install it. Luckily, changing the radio will only take you just for not long time. And Here is the helpful installation guide of navigation system for BMW 5 Series 2013-2016 Stereo,hope anyone in need can take it as the reference.

Before installation, you should pay attention to some important tips. First of all, you can disconnect the power and prepare some tools such as lever before the removal and the installation. Secondly, you should keep all the separate parts from the car and take great care of the dashboard to avoid scratching it during its detachment and installation.

Last but not least, you should keep handy any parts from the car and make use of all the original screws from the car as much as possible so that each related part of the unit can be fixed securely.

Installation Instruction of Navigation for BMW Series 5 2013-2016

1.Lever air outlet panel from the both sides.

2.Pull out the whole AC panel and Disconnect the wiring.

3.Take off the right and the left bottom screws.

4.Pull out the frame of OEM screen.

5.Disconnect the wiring and take off the panel of the OEM screen.

6.Take off the screw on both sides.

7.Pry up panel and Unplug the two connectors on the back.

8..Take off the screw on both sides.

9.Pull out OEM head unit and Unplug the main power cable. 

10.Unplug the fiber optical connector (if with OEM fiber optical).

11.Connect the unplugged fiber optical connector with new wiring(if with OEM fiber optical).

12.Connect OEM male connector with new female connector.

13.Connected the wiring behind the original radio, then install the CD unit and fix the right side screws.

14.Fix the screw on the left side and Install the button assembly.

15.Connect the new wiring to new screen and Install the new frame.

16.Fix the 2 screws, then Connect the wires and put the AC vent board back.

After you finished the installation procedure, you can test the original car’s functions and see whether it can work well. As far as I am concerned, I would like to choose some optional function and check whether it can have good performance. But if you meet any problems during this process, you can ask for an experienced technician to help you to solve this tough task. And if you still find it too difficult for you to complete it, I want to recommend you to use the internet to search your answer such as Seicane, which has just new released a product of BMW 5 Series for 2013-2016 , and this new unit has got many customer’s attention since it has come out.

Made with a 10.25” IPS touchscreen, not only can you check information at a best view, but you can operate the product very conveniently. Since it only exchanges your original car TFT monitor, all original car functions are kept as before.

Being compatible with original camera and external camera is one of powerful functions of this unit. Moreover, the big screen shows super clear rear images to help you reverse and park the car safely.

To conclusion, if you really like it, please don’t hesitate to visit it now !