Home › 2019 › January

Monthly Archives: January 2019

How to Update a 2007 2008 2009 2010 BMW X5 E70/X6 E71 GPS Bluetooth Car Radio with Navi Parts Conveniently

Posted on by — 8 Comments ↓ 10,496 views
2007 2008 2009 2010 BMW X5 E70X6 E71 GPS Bluetooth Car Radio after installation

To have your new car stereo installed in your car, you can either go to a car stereo upgrade center or ask a professional for help. But if you have some related installation experience, you can try to do it on your own with the help of a detailed installation instruction. Here I’d like to share a step-by-step 2007 2008 2009 2010 BMW X5 E70/X6 E71 car stereo installation instruction from Seicane for your reference.If you own the same or similar dashboard and also want to upgrade your factory radio, you can refer to it to help with the installation.

2007 2008 2009 2010 BMW X5 E70X6 E71 GPS Bluetooth Car Radio after installation
2007 2008 2009 2010 BMW X5 E70X6 E71 GPS Bluetooth Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2007 2008 2009 2010 BMW X5 E70/X6 E71 car stereo installation instruction

1. Press the button that indicated so as to open the glove box.

Press the button that indicated so as to open the glove box
Press the button that indicated so as to open the glove box
1-1
1-1

2. Use a pry tool to pry loose the air vent dash trim.

Use a pry tool to pry loose the air vent dash trim
Use a pry tool to pry loose the air vent dash trim
2-1
2-1

3. Pull out the air-conditioning vent and disconnect the plugs connected behind it.

Pull out the air-conditioning vent and disconnect the plugs connected behind it
Pull out the air-conditioning vent and disconnect the plugs connected behind it
3-1
3-1

4. Then you are going to come the side and pull out the one switch for the actual glove box compartment.

Then you are going to come the side and pull out the one switch for the actual glove box compartment
Then you are going to come the side and pull out the one switch for the actual glove box compartment

5. Use a screwdriver to remove the two screws that fix the original car radio dash trim.

Use a screwdriver to remove the two screws that fix the original car radio dash trim
Use a screwdriver to remove the two screws that fix the original car radio dash trim
5-1
5-1

6. Remove two clips that are behind this radio face.

Remove two clips that are behind this radio face
Remove two clips that are behind this radio face
6-1
6-1

7. Remove four screws that fix the original car radio and pull it out from the dash. Then unplug the connectors and wires behind the car radio.

Remove four screws that fix the original car radio and pull it out from the dash. Then unplug the connectors and wires behind the car radio
Remove four screws that fix the original car radio and pull it out from the dash. Then unplug the connectors and wires behind the car radio

8. Unscrew the screws that fix the original display screen and then remove the screen.

Unscrew the screws that fix the original display screen and then remove the screen
Unscrew the screws that fix the original display screen and then remove the screen

9. Disconnect the connectors at the back of the screen.

Disconnect the connectors at the back of the screen
Disconnect the connectors at the back of the screen

10. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

11. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

12. Connect the Seicane car radio to your original radio’s plugs.

13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14. Put the new Seicane car radio into the dash.

15. Put everything into their original place. All the installation is done.

 

Now do you have a general understanding of a 2007 2008 2009 2010 BMW X5 E70/X6 E71 car radio installation? If there are any problems that you don’t know how to deal with, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can straightly go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. Anyway, before installation, it is essential for you to pick an ideal car radio. If you don’t know which kind of car radios can fit your car well, here I would like to share a remarkable 2007 2008 2009 2010 BMW X5 E70/X6 E71 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/android-hd-touchscreen-radio-head-unit-for-2007-2010-bmw-x5-e70-x6-e71-car-stereo-gps-navigation-system-bluetooth-phone-wifi-support-dvr-usb-dab-obdii-steering-wheel-control-backup-camera-s028215

This car radio based on the stable operation system and a powerful processor allows you to embrace a much smoother, faster and easier operation experience than ever before. And if you install it in your beloved car, almost all your different needs in your car can be met.

Even you don’t have any sense of direction, you won’t get lost any longer thanks to this unit. With the assistance of the worldwide real-time GPS navigation system of this unit, you can easily locate where you are currently and accurately find the optimal route to get to any locations you would like to go to. And you can also listen to your favorite music while navigating thanks to this unit’s dual zone function.

Additionally, through the wireless Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you are able to dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from your phone music playlist. Therefore, Bluetooth function can bring you great convenience and enjoyment.

What are you waiting for? If you like this unit, just add it to your shopping cart right now!

How to Install and Upgrade a 2009 2010 2011 2012-2016 NISSAN NV200 GPS Navigation Bluetooth Mirror Link Carplay USB SD Head Unit

Posted on by — No Comments ↓ 3,350 views

If your factory radio is too out-dated, in my opinion, it is wise of you to replace your factory radio with a brand new multifunctional car radio so that you can enjoy more convenience and enjoyment as well as embrace a brand new driving experience. The following is a 2009 2010 2011 2012-2016 NISSAN NV200 car radio installation instruction from Seicane which I would like to share with you. If you own the same or similar dashboard, you’d better refer to this instruction.

2009 2010 2011 2012-2016 NISSAN NV200 car radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2009 2010 2011 2012-2016 NISSAN NV200 car radio installation instruction

1. The original car radio.

The original car radio

2. Grab the ashtray and take it out.

Grab the ashtray and take it out

3. Remove the metal platefrom the bottom.

Remove the metal platefrom the bottom

4. Release this panel.

Release this panel

5.Push the button upwards to unsnap it.

Push the button upwards to unsnap it

6. Take out this panel softly.

Take out this panel softly

7. Unscrew two screws fixed the radio frame.

Unscrew two screws fixed the radio frame

8. Get your nails underneath to click off the radio frame.

Get your nails underneath to click off the radio frame
8-1
8-1
8-2

9. Unscrew the screws holding the radio on the dashboard.

Unscrew the screws holding the radio on the dashboard

10. Take out the original car stereo and disconnect the connectors at the back of the stereo.

11. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo

12. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo

13. Connect the Seicane car stereo to your original stereo’s plugs.

14. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

15. Put the new Seicane car stereo into the dash.

16. Put everything into their original place. All the installation is done.

 

Wish the above installation steps can be helpful for you. If you have any doubts, please don’t hesitate to contact your dealer, communicate with someone experienced or turn to a professional for help. If you still think it hard to install the new car radio by yourself, you can directly ask a professional technician to help you with the installation. Besides, it is very essential for you to pick an ideal car radio. If you have no ideas, you can check out the following link which is an amazing 2009 2010 2011 2012-2016 NISSAN NV200 car radio from Seicane.

https://www.seicane.com/android-hd-touchscreen-radio-for-2009-2016-nissan-nv200-gps-navigation-car-stereo-bluetooth-support-mirror-link-obd2-aux-3g-wifi-dvr-1080p-video-steering-wheel-control-s04109e

Above link related car head unit comes with RAM 2GB \ ROM 32GB \ CPU Quad-core \ Plug and play \ Support RDS, SWC,Carplay Android Auto Support etc. Certainly this one will works for your car and bring you joyful time with driving.

OR

https://www.seicane.com/dvd-navigation-system-touch-screen-for-2009-2015-nissan-nv200-with-bluetooth-remote-control-tv-tuner-radio-s041786r

This car radio comes with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Build-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP etc.

Even though you don’t have a good sense of directions, under the guidance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you can easily know your current locations and find the right way to reach any locations you would like to go to. What’s more, thanks to this unit’s dual zone function, you can freely listen to car radio, USB or SD card music playback under GPS mode.

Additionally, under the wireless Bluetooth technology, without taking your hands off the steering wheel, you can connect your Bluetooth-enabled mobile phone to this car radio, so you can dial, answer, reject and mute Bluetooth hands-free phone calls as well as listen to Bluetooth streaming music from phone music playlists.

Wish you like this unit and good luck to you.

Quick Install and Upgrade Tutorial for a 2008 2009 2010 2011-2015 Mitsubishi Lancer-ex GPS Navigation Bluetooth USB Radio Carplay

Posted on by — No Comments ↓ 1,859 views
2008 2009 2010 2011 2012-2015 Mitsubishi Lancer-ex car radio after installation

If you would like to remove your factory radio and install a new car radio, what you need to do is to find out what features you need. And if your factory radio cannot be compatible with these features you are eager to, you can think about replacing your factory radio with a new aftermarket car radio. The following is a detailed 2008 2009 2010 2011-2015 Mitsubishi Lancer-ex car radio installation instruction from Seicane. If you also own the same or similar dashboard, you can refer to this instruction.

2008 2009 2010 2011 2012-2015 Mitsubishi Lancer-ex car radio after installation
2008 2009 2010 2011 2012-2015 Mitsubishi Lancer-ex car radio after installation

Here are four tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2008 2009 2010 2011-2015 Mitsubishi Lancer-ex car radio installation instruction

1. Before installation, please remove any CDs from the head unit, and then disconnect the negative from your battery.

Before installation, please remove any CDs from the head unit, and then disconnect the negative from your battery
Before installation, please remove any CDs from the head unit, and then disconnect the negative from your battery

2. Remove trim pieces to access original car radio as follows.

Remove trim pieces to access original car radio as follows
Remove trim pieces to access original car radio as follows
2-1
2-1
2-2
2-2
2-3
2-3

3. Remove hazard warning accessory.

Remove hazard warning accessory
Remove hazard warning accessory

4. Disconnect Ribbon Harness and wiring loom.

5. Remove car radio fascia, please gently and carefully pull upwards from left hand corner.

Remove car radio fascia, please gently and carefully pull upwards from left hand corner
Remove car radio fascia, please gently and carefully pull upwards from left hand corner
5-1
5-1

6. Remove the four screws that are holding the originalcar radio in place.

Remove the four screws that are holding the originalcar radio in place
Remove the four screws that are holding the originalcar radio in place

7. Gently take out the original car radio.

Gently take out the original car radio
Gently take out the original car radio

8. Remove theoriginal car radio’s wiring harness and antenna from the back of the car radio.

9. Remove the factory mounting brackets and install them on the new car radio.

10. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

11. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

12. Connect the Seicane car radio to your originalradio’s plugs.

13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

14. Put the new Seicane car radio into the dash.

15. Put everything into their original place. All the installation is done.

 

Wish you can learn something useful from the above installation instruction. If you encounter any difficulties and don’t know how to overcome them, you can seek for advice from your dealer or a professional. Or during the installation, you can contact your dealer, communicate with someone experienced or turn to a professional technician. Anyway, before installation, it is essential for you to select an ideal car radio for your beloved car radio. If you have no ideas, you can refer to the following link which is a remarkable 2008 2009 2010 2011-2015 Mitsubishi Lancer-ex car radio from Seicane.

https://www.seicane.com/android-2008-2015-mitsubishi-lancer-ex-hd-touchscreen-gps-navigation-radio-with-fm-bluetooth-wifi-usb-1080p-video-mirror-link-obd2-rearview-camera-s04117

With this car radio installed in your car, you will freely get access to a wide range of practical and entertainment features, such as GPS navigation function, FM/AM radio, Bluetooth hands-free phone calls, Bluetooth streaming music, AUX function, file management, etc. Thus, this all-in-one car radio from Seicane can be taken as one of the most suitable replacements for your factory radio.

Under the guidance of turn-by-turn directions and voice prompts provided by the high-accuracy 3D GPS navigation system, you can easily know your current locations and find the right way to reach your desired destinations even you are driving around an unfamiliar place. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

Through Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, Bluetooth hands-free phone calls and Bluetooth streaming music are both available for you, which can give you great convenience and enjoyment.

Wish you like this unit and good luck!

How to Upgrade and Install a 2015 Toyota Highlander Bluetooth Music GPS Navigation Mirror Link Car Radio

Posted on by — 2 Comments ↓ 2,240 views
2015 Toyota Highlander Car Radio after installation

If you would like to embrace a brand new driving experience, you can carefully think about removing your factory radio and installing a new aftermarket car radio. While for the installation, you can refer to a related installation guide to help you. The following is a 2015 Toyota Highlander car radio installation guide from Seicane, which will help you gain a general understanding of the car radio installation. If you own the same or similar dashboard, you can refer to this guide carefully.

2015 Toyota Highlander Car Radio after installation
2015 Toyota Highlander Car Radio after installation

Tips about the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2015 Toyota Highlander car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Use a plastic removal tool to remove the panel and frame around the A/C vent.

Use a plastic removal tool to remove the panel and frame around the A/C vent
Use a plastic removal tool to remove the panel and frame around the A/C vent
2-1
2-1

3. Use the plastic removal tool to pry the air conditioning vents and remove them.

Use the plastic removal tool to pry the air conditioning vents and remove them
Use the plastic removal tool to pry the air conditioning vents and remove them

4. Remove the screws that fixed the radio on the dashboard.

5. Gently take out the original car radio.

Gently take out the original car radio
Gently take out the original car radio

6. Disconnect the connectors and cables at the back of the radio.

7. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo
Check all the accessories for the new Seicane car stereo

8. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo
Connect the harnesses to the back of the new Seicane car stereo

9. Connect the Seicane car stereo to your original stereo’s plugs.

10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car stereo into the dash.

12. Put everything into their original place. All the installation is done.

 

Above is the installation guide for a 2015 Toyota Highlander car radio. Wish you can learn some skills from it. If you have any doubts, please feel free to contact your dealer, communicate with someone experienced or turn to a professional for help. Or if you still think it hard to install the new car radio, you’d better go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. For the selection of an ideal car radio, if you have no ideas, you can refer to the following link which is a remarkable 2015 Toyota Highlander car radio from Seicane.

https://www.seicane.com/2015-toyota-highlander-android-gps-navigation-system-touchscreen-radio-bluetooth-obd2-dvr-rearview-camera-tv-1080p-4g-wifi-mirror-link-steering-wheel-control-s18t222

This car radio’s operation has been upgraded to the intelligent and stable Android 6.0 operation system and it has a powerful quad-core CPU processor. And this smart car radio also comes with a wide range of practical and entertainment features, so it can almost meet most of your different needs in car.

With the assistance of the worldwide real-time GPS navigation system of this car radio, you are able to know your current locations and have the most suitable route option to arrive at your destinations. And while navigating, you can freely listen to your favorite music to relax yourself thanks to this unit’s dual zone function.

Through the Bluetooth connection between your Bluetooth-enabled mobile phone and this unit, you are able to dial, answer, reject and mute Bluetooth hands-free phone calls as well as enjoy Bluetooth streaming music. So you can gain a lot of convenience and enjoyment.

What are you waiting for? If you like this unit, just add it to your shopping cart right now.