Home › 2018 › December

Monthly Archives: December 2018

Quick Install and Upgrade Tutorial for a 2009-2014 Toyota Highlander GPS Navigation Bluetooth USB WIFI Car Radio Unit

Posted on by — No Comments ↓ 2,005 views

To enjoy more convenience and enjoyment in car, it is wise of you to think about removing your factory radio and installing a new aftermarket car radio. The following is a 2009-2014 Toyota Highlander car radio installation instruction from Seicane. If you own the same or similar dashboard and would like to upgrade your factory radio, you can refer to the instruction carefully. Wish you can learn something useful from it.

2014 2015 Toyota Highlander car radio after installation
2014 2015 Toyota Highlander car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2009-2014 Toyota Highlander car radio installation instruction

1. Carefully pry lower dash panel out.

Carefully pry lower dash panel out
Carefully pry lower dash panel out
1-1
1-1

2. Grip onto the A/C control panel, and give it quick tug to remove.

Grip onto the A/C control panel, and give it quick tug to remove
Grip onto the A/C control panel, and give it quick tug to remove

3. Gently pry out air vent and bazel above the radio.

Gently pry out air vent and bazel above the radio
Gently pry out air vent and bazel above the radio

4. There are four 10mm bolts to be removed.

There are four 10mm bolts to be removed
There are four 10mm bolts to be removed

5. Remove these four 10mm bolts with a screwdriver.

Remove these four 10mm bolts with a screwdriver
Remove these four 10mm bolts with a screwdriver

6. Gently pull the radio out of the dashboard.

Gently pull the radio out of the dashboard
Gently pull the radio out of the dashboard

7. Disconnect the connectors and cables at the back of the radio.

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original radio’s plugs.

11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12. Put the new Seicane car radio into the dash.

13. Put everything into their original place.

 

Wish the above installation instruction can be helpful for you to some degree. If you have any problems, you can contact your dealer, communicate with someone experienced or ask a professional for help. If you still think it hard to finish the whole installation process on your own, you can directly go to a car radio upgrade center and arrange a professional technician to help you install the new car radio. Besides, if you don’t know how to select an ideal car radio for your car, here I would like to recommend an amazing 2009-2014 Toyota Highlander car radio from Seicane to you. For more details, please click:

https://www.seicane.com/seicane-s121012-android-sat-nav-in-car-dvd-system-2008-2014-toyota-highlander-with-cpu-3g-wifi-am-fm-radio-bluetooth-music-mirror-link-obd2-backup-camera-dvr

This powerful 2009-2014 Toyota Highlander car radio comes with come with the latest Android Radio, RAM 4GB \ ROM 64GB \ CPU 8-core \ Built-in Carplay \ 2.5D IPS Screen, Support RDS, SWC, XM radio APP ,etc.

Even though you are not good at identifying directions, under the guidance of turn-by-turn directions and voice prompts provided by the high-accuracy 3D GPS navigation system, you are able to easily locate where you are and navigate to any locations you would like to go to. Besides, this unit comes with dual zone function, which enables you to listen to your favorite music while navigating.

Additionally, under the wireless Bluetooth technology, without taking your hands off the steering wheel, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you to gain a lot of convenience and enjoyment as long as you connect your Bluetooth-enabled mobile phone to this car radio.

Wish you like this multifunctional car radio and good luck to you!

Top Tutorial on the Removal and Installation for a 1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 GPS Navigation USB WIFI Carplay Car Stereo Unit

Posted on by — No Comments ↓ 3,837 views
1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio after installation

If you find that your factory radio is not up-to-date enough for you to get access to some modern and brand new features, it is suggested that you can remove your factory radio and install a new aftermarket car radio for your car. If you get an ideal car radio installed in your car, you can embrace a brand new driving experience. The following is a 1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio installation instruction from Seicane. You can refer to it if you own the same or similar dashboard.

1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio after installation
1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Use a plastic trim tool to remove trim strip.

Use a plastic trim tool to remove trim strip
Use a plastic trim tool to remove trim strip

3. Remove screws marked by red arrows.

Remove screws marked by red arrows
Remove screws marked by red arrows

4. Take original radio out of the car.

Take original radio out of the car
Take original radio out of the car

5. Pull out original power plug of the car.

Pull out original power plug of the car
Pull out original power plug of the car

6. Connect the power cables as the picture shows.

Connect the power cables as the picture shows
Connect the power cables as the picture shows

7. Remove screws in the spare tire in the trunk.

Remove screws in the spare tire in the trunk
Remove screws in the spare tire in the trunk

8. Take out the spare tire.

Take out the spare tire
Take out the spare tire

9. Remove four screws marked with red arrows.

Remove four screws marked with red arrows
Remove four screws marked with red arrows

10. Remove screws in triangle crutch.

Remove screws in triangle crutch
Remove screws in triangle crutch

11. Take out triangle crutch.

Take out triangle crutch
Take out triangle crutch

12. Connect original plug of the car with power plug of DVD GPS.

Connect original plug of the car with power plug of DVD GPS
Connect original plug of the car with power plug of DVD GPS

13. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

14. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

15. Connect the Seicane car radio to your original car radio s plugs.

16. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

17. Put the new Seicane car radio into the dash and install the four screws.

18. Install the trim panel into its original place.

 

Now do you have a general understanding of the above removal and installation process? If you still have any doubts, please feel free to consult your dealer, communicate with someone experienced or turn to a professional for help. Or if you are afraid of making damage to either your car radio or your car, you can directly arrange a professional technician to help you install the new car radio. Anyway, it is essential to select an ideal car radio for your beloved car, if you have no ideas, you can check out the following link which is an amazing 1996 1997 1998 1999-2003 BMW 5 Series E39 520i 523i 525i M5 car radio from Seicane with you. For more details, please click:

https://www.seicane.com/in-dash-1996-2003-bmw-5-series-e39-520i-523i-525i-m5-android-gps-navigation-system-with-touch-screen-3g-wifi-tpms-usb-dvr-obdii-rear-camera-aux-16g-flash-steering-wheel-control-s089993

This amazing car radio is running on the the stable Android 8.0 operation system and a strong eight-core CPU processor as well as 4GB RAM and 32GB ROM, which enables you to have a much smoother, faster and easier operation experience than before.

Even you don’t have a good sense of directions, you can make full use of this unit’s built-in GPS module to locate where you are currently and find the right way to get to your desired destinations. And this unit’s dual zone function enables you to listen to your favorite music while navigating, and the music will automatically switch to GPS voice.

What’s more, under the wireless Bluetooth technology, you can make your Bluetooth-enabled mobile phone pair with this car radio, so you can freely get access to both Bluetooth hands-free phone calls and Bluetooth streaming music for convenience and enjoyment.

If you like this unit, just add it to your shopping cart. Good luck to you!

Quick Installation Instruction for a 2007 2008 2009 2010 Toyota OLD Corolla GPS Navigation Bluetooth Audio USB Radio Stereo

Posted on by — No Comments ↓ 2,145 views
2007 2008 2009 2010 Toyota OLD Corolla GPS Sat Nav Bluetooth Car Radio after installation

There is no doubt that you may feel tired or bored if you have been driving for a long time, and in that case, you must want to refresh yourself. Under this circumstance, you can listen to your favorite music, watch TV programs or play videos in your car. And your factory radio may not support these entertainment features, so you can consider replacing your factory radio with a new aftermarket car radio. The following is a 2007 2008 2009 2010 Toyota OLD Corolla car radio installation guide from Seicane. If you own the same or similar dashboard, you can refer to it carefully.

2007 2008 2009 2010 Toyota OLD Corolla GPS Sat Nav Bluetooth Car Radio after installation
2007 2008 2009 2010 Toyota OLD Corolla GPS Sat Nav Bluetooth Car Radio after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

2007 2008 2009 2010 Toyota OLD Corolla car radio installation guide

1. Remove the bottom panel (air conditioning) with plastic knife.

Remove the bottom panel (air conditioning) with plastic knife
Remove the bottom panel (air conditioning) with plastic knife
1-1
1-1

2. Pry the top of the original car CD panel with plastic knife.

Pry the top of the original car CD panel with plastic knife
Pry the top of the original car CD panel with plastic knife

3. Remove the four screws with a screwdriver.

Remove the four screws with a screwdriver
Remove the four screws with a screwdriver

4. Take the original radio out of the dash.

Take the original radio out of the dash
Take the original radio out of the dash

5. Pull the plug of the original radio.

Pull the plug of the original radio
Pull the plug of the original radio

6. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

7. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

8. Socket docking with the original radio directly, instead of cutting the original plug off.

Socket docking with the original radio directly, instead of cutting the original plug off
Socket docking with the original radio directly, instead of cutting the original plug off

9. Put the original radio plug into our Seicane radio.

Put the original radio plug into our Seicane radio
Put the original radio plug into our Seicane radio

10. Put the new Seicane radio back into the dash.

11. Turn on the new Seicane radio to check if all functions work well. If it doesn’t, please check whether all the cables are connected correctly.

12. Install four screws and panels into their original place.

 

Wish you can learn something useful from the above installation steps. If you come across any problems you don’t know how to deal with, you can seek help from your dealer, someone experienced or a professional. If you still think it hard to install the new car radio, you can directly arrange a professional technician to install the new car radio.

While for the selection of an ideal car radio, if you have no ideas, you can check out the following link which is an amazing 2007 2008 2009 2010 Toyota OLD Corolla car radio from Seicane.

https://www.seicane.com/2007-2008-2009-2010-toyota-old-corolla-android-bluetooth-radio-gps-navigation-head-unit-support-wifi-1080p-video-backup-camera-audio-system-dvr-obd2-s0467

This all-in-one car radio is running on the stable Android 6.1 operation system and a powerful quad-core CPU processor to enhance its capabilities, configuration and performance, so it can be regarded as one of the best replacements for your factory radio. Besides, it also comes with a wide range or practical and entertainment features, mainly including built-in 3D GPS navigation, Bluetooth hands-free phone calls, Bluetooth streaming music, FM/AM radio tuner, file management, USB or SD card connection, etc.

With the assistance of the turn-by-turn directions and voice prompts provided by the high-end 3D GPS navigation system, you are able to locate where you are and navigate to your desired destinations. And this unit’s dual zone function enables you to listen to your favorite music while navigating.

What’s more, through the Bluetooth connection between your Bluetooth-enabled mobile phone and this car radio, both Bluetooth hands-free phone calls and Bluetooth streaming music are available for you to gain more convenience and enjoyment.

If you like this unit, just add it to your shopping cart.