How to Install a 2012 CITROEN C4 Car Stereo With Radio GPS Navigation Function in an Effective Way

2012 CITROEN C4 car stereo after installation

Would you like to learn to remove your factory radio and install a new car radio on your own? If your answer toward this question is “yes”, then you can find a detailed installation instruction to guide you. This article is mainly about introducing how to install a 2012 CITROEN C4 car stereo with radio, GPS function and other useful features. If you own the same vehicle type, you might as well refer to this instruction carefully. Wish it is helpful for you.

2012 CITROEN C4 car stereo after installation
2012 CITROEN C4 car stereo after installation

Before and during installation, you should notice:

1. Before connecting, please make sure the ignition is off to avoid short circuit.

2. Ensure connect the yellow and red power cable at last.

3. Ensure that all loose wires are isolated with electrical tape

4. Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5. Ensure that all ground is connected to the same place.

6. Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2012 CITROEN C4 car stereo installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Use a plastic knife to pry the trim panel and remove it.

Use a plastic knife to pry the trim panel and remove it
Use a plastic knife to pry the trim panel and remove it
2-1
2-1
2-2
2-2

3. Remove screws that are holding the radio.

Remove screws that are holding the radio
Remove screws that are holding the radio

4. Take out the original car radio.

Take out the original car radio
Take out the original car radio

5. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio
Disconnect the connectors and cables at the back of the radio

6. Check all the accessories for the new Seicane car radio.

7. Connect the harnesses to the back of the new Seicane car radio.

8. Connect the Seicane car radio to your original stereo’s plugs.

9. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car radio into the dash.

11. Put everything into their original place. All the installation is done.

 

If you have any doubts, please don’t hesitate to consult your dealer, communicate with someone experienced or turn to a professional for help. Besides, before installation, it is essential for you to carefully pick an ideal car radio. Here I would like to recommend a remarkable 2012 CITROEN C4 car stereo from Seicane with you. For more details, please click:

https://www.seicane.com/hd-touchscreen-radio-android-head-unit-for-2012-citroen-c4-car-stereo-gps-navigation-system-bluetooth-phone-wifi-support-mirror-link-obdii-dvr-steering-wheel-control-usb-s086990f

This powerful car stereo is running on the newest Android 6.0 operation system, high-quality 8-core CPU and 2GB RAM.

Even though you are not good at identifying directions, the high-accuracy 3D GPS navigation system is specially built in to offer you some help. With the help of the worldwide real-time navigation, you can get access to features like current location, 3D street view, landmark building display, turn-by-turn voice directions, etc. So you can be accurately guided to arrive at your desired destinations.

Besides, under the wireless Bluetooth technology, without taking your hands off the steering wheel, hands-free calls and streaming music are both available as long as you pair your Bluetooth-enabled mobile phone with this unit.

If you like this unit, just add it to your shopping cart right now. Good luck!

The Advanced Instruction on a 2014 2015 2016 2017 Jeep Grand Cherokee Car Radio Removal and Installation

There is no denying that with an ideal car radio installed in your car, you can get access to a wide range of practical and entertainment features. So if you are fed up with your factory radio, you can replace it with a new aftermarket car radio. And with a related installation guide, you can also try to remove the factory radio and install the new car radio. The following is a 2014 2015 2016 2017 Jeep Grand Cherokee car radio installation guide from Seicane. Wish you can get some help from it.

2014 2015 2016 2017 Jeep Grand Cherokee Car Radio after installation
2014 2015 2016 2017 Jeep Grand Cherokee Car Radio after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriverbefore the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s therecommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2014 2015 2016 2017 Jeep Grand Cherokee car radio installation guide

1. Prepare a plastic removal tool. Remove the AC control panel.

Prepare a plastic removal tool. Remove the AC control panel
Prepare a plastic removal tool. Remove the AC control panel
1-1
1-1

2. Remove two screws below.

Remove two screws below
Remove two screws below
2-1
2-1

3. Remove the radio trim panel with a plastic removal tool.

Remove the radio trim panel with a plastic removal tool
Remove the radio trim panel with a plastic removal tool
3-1
3-1

4. Unscrew four screws that are holding the radio on the dashboard.

Unscrew four screws that are holding the radio on the dashboard
Unscrew four screws that are holding the radio on the dashboard

5. Gently remove the original radio.

Gently remove the original radio
Gently remove the original radio

6. Disconnect the connectors and cables at the back of the radio.

Disconnect the connectors and cables at the back of the radio
Disconnect the connectors and cables at the back of the radio

7. Check all the accessories for the new Seicane car radio.

8. Connect the harnesses to the back of the new Seicane car radio.

9. Connect the Seicane car radio to your original stereo’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place. All the installation is done.

 

Wish the above removal and installation steps can be helpful for you. If you have any questions, you can contact your dealer, communicate with someone experienced or turn to a professional for help. Or you can directly arrange a professional technician to help you install the new car radio. Besides, to help you select an ideal car radio, here I would like to share an amazing 2014 2015 2016 2017 Jeep Grand Cherokee car radio from Seicane with you.

https://www.seicane.com/hd-touch-screen-2014-2015-2016-2017-jeep-cherokee-android-radio-gps-navigation-bluetooth-music-usb-wifi-audio-system-support-dvr-obd2-tpms-digital-tv-backup-camera-1080p-video-auto-a-v-s18jp62

This great 2014 2015 2016 2017 Jeep Grand Cherokee car radio, equipped with the worldwide real-time 3D GPS navigation system, enables you to locate where you are and navigate to your desired destinations through turn-by-turn directions and voice prompts. And this unit’s dual zone function enables you to freely listen to your favorite music while navigating. Besides, you can also make full advantage of this unit’s built-in Bluetooth module to get access to hands-free calls and Bluetooth music streaming from your Bluetooth-enabled mobile phone and this unit.

Don’t hesitate to purchase this unit and wish you enjoy your driving accompanied by it!