Home › 2017 › March

Monthly Archives: March 2017

How to Remove and Install a 2006-2012 TOYOTA RAV4 Car Radio with Bluetooth GPS Navigation System

Posted on by — No Comments ↓ 19,728 views
2006-2012 TOYOTA RAV4 Car Radio after installation

When driving out, you must want to get to a lot of locations without getting lost and have great entertainment at the same time. In that case, it is necessary for you to install a powerful car radio which is integrated with GPS navigation function and entertainment features. If you are tired of your factory radio and want to replace it, then a detailed removal and installation guide can be helpful for you. The following instruction is about a 2006-2012 TOYOTA RAV4 car radio from Seicane. If you happen yo have the same dashboard, you can take it as a reference.

2006-2012 TOYOTA RAV4 Car Radio after installation
2006-2012 TOYOTA RAV4 Car Radio after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2006-2012 TOYOTA RAV4 car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Remove the panel by using plastic removal tool.

Remove the panel by using plastic removal tool
Remove the panel by using plastic removal tool

3. Unplug the hazard warning lights.

Unplug the hazard warning lights
Unplug the hazard warning lights

4. Remove the left panel and unplug the switch.

Remove the left panel and unplug the switch
Remove the left panel and unplug the switch

5. Unplug the switch.

Unplug the switch
Unplug the switch

6. Remove four screws.

Remove four screws
Remove four screws

a. Position for screws.

6-1 Position for screws
6-1 Position for screws

7. Pull out the factory radio.

Pull out the factory radio
Pull out the factory radio

8. The back of the original car radio.

The back of the original car radio
The back of the original car radio

9. Remove 8 screws from original car radio.

Remove 8 screws from original car radio
Remove 8 screws from original car radio
9-1
9-1

10. Remove 2 screws at the top of the new radio.

Remove 2 screws at the top of the new radio
Remove 2 screws at the top of the new radio
10-1
10-1

11. Install 8 screws to new car radio.

Install 8 screws to new car radio
Install 8 screws to new car radio

12. Plug into factory plugs.

Plug into factory plugs
Plug into factory plugs

13. All plugs after connection.

All plugs after connection
All plugs after connection
13-1
13-1

14. Check all the accessories for the new Seicane car radio.

15. Connect the harnesses to the back of the new Seicane car radio.

16. Connect the Seicane car radio to your original car radio ‘s plugs.

17. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

18. If the new Seicane car radio works well, put it into the dash.

19. Put everything into their original place, and all the installation is done.

 

After reading the above installation guide, perhaps now you have a general understanding of the installation on a 2006-2012 TOYOTA RAV4 car radio. If there are any doubts, you are welcome to ask for a wiring diagram from your dealer or seek for professional suggestion from a professional. However, if you don’t know which kind of car stereos can work well in your car, I’d like to recommend a fabulous 2006-2012 TOYOTA RAV4 car radio from Seicane to you. For more information, please click:

http://www.seicane.com/android-aftermarket-head-unit-for-2006-2012-toyota-rav4-with-hd-touchscreen-1024-600-radio-rds-gps-navigation-system-bluetooth-wifi-mirror-link-steering-wheel-control-quad-core-s127106

Loaded with the stable Android 5.1.1 operation system and a high quality RK3188 1.6 GHz Cortex A9 Quad-core processor, this unit’s capabilities and performance can be enhanced to provide you with the best services.

Coming with a 7 inch multi-touch screen with 1024*600 pixels, this unit enables you to enjoy the best display effect when you are watching videos, TV programs and movies. Besides, it can provide you with the perfect view of the road ahead.

What’s more, numerous features are compatible with this unit, including 3D GPS navigation, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth music, CD/DVD player, steering wheel control, USB&SD connection, etc. As long as you take full advantage of these features, you will definitely embrace a brand new driving experience.

Wish you like this unit and good luck to you!

How to Install a 2011 onward Hyundai Accent Blue Car Stereo with Bluetooth GPS System

Posted on by — No Comments ↓ 4,266 views
2011 onward Hyundai Accent Blue Car Stereo after installation

After you get an ideal car stereo, have you considered installing it by yourself? As for the installation, you may worry it may be too complicated. Actually, if you have some related installation experience before, you can follow a correct installation guide to help with the installation. If it is the first time for you to install the stereo, it is highly suggested that you should arrange a technician to help you. A detailed 2011 onward Hyundai Accent Blue car stereo installation instruction is as follow. If you own such a car model, you can refer to it.

2011 onward Hyundai Accent Blue Car Stereo after installation
2011 onward Hyundai Accent Blue Car Stereo after installation

Some tips before the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2011 onward Hyundai Accent Blue car stereo installation instruction

1. Pry the edges of the panel with a lever.

Pry the edges of the panel with a lever
Pry the edges of the panel with a lever

2. Remove the panel with your hands.

Remove the panel with your hands
Remove the panel with your hands

3. Disconnect the connectors at the back of the panel.

Disconnect the connectors at the back of the panel
Disconnect the connectors at the back of the panel

4. Unscrew four screws holding the original radio in place with a screwdriver.

Unscrew four screws holding the original radio in place with a screwdriver
Unscrew four screws holding the original radio in place with a screwdriver

5. Take the original radio out of the dash with your hands.

Take the original radio out of the dash with your hands
Take the original radio out of the dash with your hands

6. Disconnect the connectors at the back of the original radio.

Disconnect the connectors at the back of the original radio
Disconnect the connectors at the back of the original radio

7. Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car stereo
Check all the accessories for the new Seicane car stereo

8. Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car stereo
Connect the harnesses to the back of the new Seicane car stereo

9. Connect the Seicane car stereo to your original car radio’s plugs.

10. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car stereo into the dash.

12. Put everything into their original place.

 

Don’t worry if you come across some problems during the installation. To solve the problems, there are three kinds of people you can seek for help, including your dealer, someone experienced and a professional.

To help you select an ideal car stereo to fit your car very well, I’d like to recommend a remarkable 2011 onward Hyundai Accent Blue car stereo from Seicane to you. For more details, please click:

http://www.seicane.com/seicane-s127202-16g-2011-onward-hyundai-accent-blue-system-gps-android-autoradio-dvd-aftermarket-oem-with-mirror-link-obd2-3g-wifi-bluetooth-music-rearview-camera-hd-1080p-video

If you install this powerful 2011 onward Hyundai Accent Blue car stereo which is compatible with numerous comprehensive features in your car, your driving experience will be taken up a notch.

With the assistance of the high-end 3D GPS navigation system, you can quickly locate where you are and accurately navigate to your ideal destinations according to turn-by-turn directions and voice prompts.

Hands-free calls and streaming music are both available as long as you realize the connection between your Bluetooth-enabled mobile phone and this car stereo under the wireless Bluetooth technology.

Besides, some optional functions can also be added to this unit, such as car DVR, backup camera, DAB, etc. The backup camera can be added to this unit which can do some help to your parking.

Just remember to add this unit to your shopping cart. Wish you enjoy your driving from now on. Good luck to you!

How to Upgrade a 2008-2014 TOYOTA Sequoia DVD Player with a Multifunctional Car Radio with Touch Screen Bluetooth GPS Navigation System

Posted on by — 2 Comments ↓ 6,598 views
2008-2014 TOYOTA Sequoia DVD Player after installation

Among a lot of ways to enhance the capacity of your car, to replace your old factory radio with a brand new car radio can be the best and most effective way. However, some car owners may regard the installation of a car radio as a very complicated job. But actually with a correct installation guide and some relative experience, you can also try to install a new car stereo on your own. Today I would like to introduce how to remove and install a car radio. If your car model is 2008-2014 TOYOTA Sequoia, you can refer to the following 2008-2014 TOYOTA Sequoia DVD Player installation instruction.

2008-2014 TOYOTA Sequoia DVD Player after installation
2008-2014 TOYOTA Sequoia DVD Player after installation

Some tips before the installation:

1. Please disconnect the power before the installation.

2. Please prepare a lever and a screwdriver before the removal and the installation.

3. Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2008-2014 TOYOTA Sequoia car radio installation instruction

1. The original car radio.

The original car radio
The original car radio

2. Pry around the panel on the left of the original car radio with a lever, and release it.

Pry around the panel on the left of the original car radio with a lever, and release it
Pry around the panel on the left of the original car radio with a lever, and release it

3. Remove the bottom pocket with your hands.

Remove the bottom pocket with your hands
Remove the bottom pocket with your hands

4. Remove the air conditioner control with a lever.

Remove the air conditioner control with a lever
Remove the air conditioner control with a lever

5. Remove four mounting screws holding the original car radio in place with a screwdriver as pictures below show.

Remove four mounting screws holding the original car radio in place with a screwdriver as pictures below show
Remove four mounting screws holding the original car radio in place with a screwdriver as pictures below show
5-1
5-1
5-2
5-2

6. Take the original car radio out of the dash with your hands.

Take the original car radio out of the dash with your hands
Take the original car radio out of the dash with your hands

7. Disconnect all connectors at the back of the original car radio.

Disconnect all connectors at the back of the original car radio
Disconnect all connectors at the back of the original car radio

8. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

9. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

10. Connect the Seicane car radio to your original car radio’s plugs.

11. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

12.Put the new Seicane radio into the dash.

13. Put everything into their original place.

 

That’s the installation steps about installing a 2008-2014 TOYOTA Sequoia DVD Player. If you have any questions, you can contact your dealer, seek advice from a professional or a experienced person. If you still think it hard to finish the whole installation process by yourself, we suggest you arrange a technician to help you install the radio straightly.

Besides, if you are still looking for a suitable car radio for your car, you’re recommended to check out the following link which is a 2008-2014 TOYOTA Sequoia DVD Player from Seicane.

http://www.seicane.com/seicane-s127107-android-2008-2014-toyota-sequoia-dvd-player-gps-radio-car-stereo-with-touch-screen-bluetooth-music-3g-wifi-backup-camera-mirror-link-obd2-steering-wheel-control-usb-sd

Equipped with numerous up-to-date features, this 2008-2014 TOYOTA Sequoia DVD Player can be a suitable replacement for your original radio.

With it installed in your car, the 3D GPS navigation can offer the guidance of turn-by-turn directions and voice prompts, so you can easily know your current locations and arrive at your destinations accurately.

The DVD player functionality allows you to play whatever you like to make both yourself and your passengers since there are a wide range of audio and video formats compatible with this unit, including DVD/DIVX/MP4/MP3/MP2/VCD.

And the Bluetooth pairing functionality enables you to enjoy great convenience and enjoyment brought by hands-free calls and streaming music with paying attention to the road ahead and keep your hands on the steering wheel.

Wish you like this car radio. Good luck to you!

How to Upgrade a 2013-2016 Toyota RAV4 Radio with Touch Screen Speakers Sound System

Posted on by — No Comments ↓ 15,054 views
2013-2016 Toyota RAV4 car radio after installation

Do you have a plan to upgrade your factory radio for a more wonderful driving experience? If you do, you have to select a new car radio firstly. After getting a suitable car radio, you can go to a car radio upgrade center to arrange a technician to install the new radio straightly. Or if you have some installation experience before, you can try to install such a radio on your own under a correct installation guide. The following is a 2013-2016 Toyota RAV4 car radio installation guide from Seicane. If you have the same dashboard, you can refer to it carefully so as to finish your installation successfully.

2013-2016 Toyota RAV4 car radio after installation
2013-2016 Toyota RAV4 car radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2013-2016 Toyota RAV4 car radio installation guide

1. Using an automotive trim tool to remove the upper dashboard trim panel. Set the panel aside once removed.

Using an automotive trim tool to remove the upper dashboard trim panel. Set the panel aside once removed
Using an automotive trim tool to remove the upper dashboard trim panel. Set the panel aside once removed
1-1
1-1

2. Gently pry the air conditioning vents on the left and right-hand sides of the factory touch screen unit away from the dashboard.

Gently pry the air conditioning vents on the left and right-hand sides of the factory touch screen unit away from the dashboard
Gently pry the air conditioning vents on the left and right-hand sides of the factory touch screen unit away from the dashboard
2-1
2-1

3. Gently pry the clock display and hazard lamp panel away from the dashboard and set it to the side.

Gently pry the clock display and hazard lamp panel away from the dashboard and set it to the side
Gently pry the clock display and hazard lamp panel away from the dashboard and set it to the side

4. Remove the four retaining screws attaching the factory touch screen unit to the dashboard.

Remove the four retaining screws attaching the factory touch screen unit to the dashboard
Remove the four retaining screws attaching the factory touch screen unit to the dashboard

5. Gently lift the touch screen unit away from the dashboard and lean it forward to gain access to the wiring harnesses on the reverse side.

Gently lift the touch screen unit away from the dashboard and lean it forward to gain access to the wiring harnesses on the reverse side
Gently lift the touch screen unit away from the dashboard and lean it forward to gain access to the wiring harnesses on the reverse side

6. Disconnect the touch screen by unplugging the individual harnesses.

Disconnect the touch screen by unplugging the individual harnesses
Disconnect the touch screen by unplugging the individual harnesses

7. Check all the accessories for the new Seicane car radio.

Check all the accessories for the new Seicane car radio
Check all the accessories for the new Seicane car radio

8. Connect the harnesses to the back of the new Seicane car radio.

Connect the harnesses to the back of the new Seicane car radio
Connect the harnesses to the back of the new Seicane car radio

9. Connect the Seicane car radio to your original radio’s plugs.

10. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

11. Put the new Seicane car radio into the dash.

12. Put everything into their original place.

 

Wish you can learn some skills to achieve the installation of a 2013-2016 Toyota RAV4 car radio. Don’t worry if you meet some difficulties during the installation. To overcome the difficulties, please feel free to contact your dealer or seek help from a professional technician. Or you can also ask an experienced person to help you alongside during the installation.

Since a car radio matters a lot for the successful installation, you have to choose a suitable car radio for your car first of all. If you don’t have any idea, we suggest you check out the following link which is a 2013-2016 Toyota RAV4 car radio from Seicane. Here comes the link, please click:

http://www.seicane.com/hd-touchscreen-1024-600-car-stereo-for-2013-2016-toyota-rav4-android-radio-gps-navigaion-wifi-am-fm-radio-rds-bluetooth-music-1080p-video-mirror-link-steering-wheel-control-quad-core-s128033

This car radio is upgraded to an advanced Android 5.1.1 operation system and a strong RK3188 1.6 GHz Cortex A9 Quad-core processor to enhance the capabilities as well as smooth the operation.

Hand-free calls and streaming music are both supported if you pair your Bluetooth-enabled mobile phone or other enabled devices with this unit through Bluetooth technology. Therefore, you will embrace a safe and cheerful driving.

Thanks to the 3D GPS navigation system of high precision, you can be accurately guided to any places you’d like to go according to turn-by-turn directions and voice prompts. And with dual-zone function, you can play your favorite music behind the scene under GPS mode which won’t have any influence on GPS function.

What’s more, there are a lot of entertainment ways to relax both yourself and your passengers by this radio, including playing DVDs, CD, VCD, music, TV programs and movies, etc.

What are you waiting for? This radio is at a competitive price now, just take it without hesitation!

Excellent Tutorial on a 2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 Radio Removal to Install an All-in-one Stereo CD Player Speakers

Posted on by — 16 Comments ↓ 12,952 views
2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 car stereo after installation

Would you like to listen to your favorite music while you are navigating to your desired destinations under the guidance of GPS navigation system? If your answer is “yes”, you should replace your single functional factory radio with a new aftermarket stereo which supports dual zone function. And to successfully finish the installation, you can find a detailed installation guide to help you. The following is the installation steps on a 2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 car stereo. You might follow them to help with the installation.

2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 car stereo after installation
2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 car stereo after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 car stereo installation steps

1. First detach the gear shift panel.

First detach the gear shift panel
First detach the gear shift panel

2. Use a screw driver to remove the screw marked with a red circle to release the car charger and ashtray.

Use a screw driver to remove the screw marked with a red circle to release the car charger and ashtray
Use a screw driver to remove the screw marked with a red circle to release the car charger and ashtray

3. Remove the car charger and ashtray assembly.

Remove the car charger and ashtray assembly
Remove the car charger and ashtray assembly

4. Use a screw driver to remove the screw marked with a red circle.

Use a screw driver to remove the screw marked with a red circle
Use a screw driver to remove the screw marked with a red circle

5. Pry the air conditioner panel out with a plastic lever.

Pry the air conditioner panel out with a plastic lever
Pry the air conditioner panel out with a plastic lever

6. Remove the original air conditioner panel.

Remove the original air conditioner panel
Remove the original air conditioner panel

7. Remove the heated seat and control panel assembly.

Remove the heated seat and control panel assembly
Remove the heated seat and control panel assembly

8. Pay attention to this buckle.

Pay attention to this buckle
Pay attention to this buckle

9. Remove two screws.

Remove two screws
Remove two screws

10. Pull out the original car radio.

Pull out the original car radio
Pull out the original car radio

11. Check all the accessories for the new Seicane stereo.

Check all the accessories for the new Seicane stereo
Check all the accessories for the new Seicane stereo

12. Connect the harnesses to the back of the new Seicane stereo.

Connect the harnesses to the back of the new Seicane stereo
Connect the harnesses to the back of the new Seicane stereo

13. Connect the Seicane stereo to your original car radio ‘s plugs.

14. Install the new Seicane radio back after the wiring harness has been connected. Fasten the four screws.

Install the new Seicane radio back after the wiring harness has been connected. Fasten the four screws
Install the new Seicane radio back after the wiring harness has been connected. Fasten the four screws

15. Install the air conditioner panel, the car charger, the ashtray, the heated seat and the control panel back.

Install the air conditioner panel, the car charger, the ashtray, the heated seat and the control panel back
Install the air conditioner panel, the car charger, the ashtray, the heated seat and the control panel back

16. Reinstall cigarette lighter.

Reinstall cigarette lighter
Reinstall cigarette lighter

17. Turn on the new Seicane stereo and have a careful check if everything works well.

 

Do not be upset if you meet some difficulties before or during the installation. In order to overcome the difficulties, you can only contact your dealer but also seek help from a professional or an experienced person.

Only a suitable car stereo can work well with your car. So before the installation, please check the compatibility between your new car stereo and your car. If you don’t have a compatible car stereo, you might check out the following link which is a 2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 car stereo from Seicane.

http://www.seicane.com/aftermarket-dvd-player-gps-navigation-system-for-2004-2011-mercedes-benz-clk-w209-clk270-clk320-clk350-clk500-clk550-support-radio-bluetooth-rearview-camera-tv-tuner-usb-sd-canbus-1080p-video-dvr-s127508d

This stereo which is specific for 2004-2011 Mercedes Benz CLK W209 CLK270 CLK320 CLK350 CLK500 CLK550 runs with the latest WinCE 6.0 operation system and a strong MTK3360 800MHZ+250MHZ DSP Dual-Core CPU to provide you with smooth operation and great performance.

When referring the practical features, you must pay attention to its GPS function and Bluetooth connectivity. With the help of the built-in GPS navigation, this stereo enables you to find the best way to reach your desired destinations according to text-to -speech guidance, route planning, lane assist and millions of points of interests. And the dual zone function supported enables you to play your favorite music while navigating.

Under the wireless Bluetooth technology, you can freely connect your Bluetooth-enabled mobile phone or other enabled devices to this unit. By doing so, you can dial, receive, reject and mute hands-free calls as well as listen to your favorite music streaming from your phone music playlists.

Wish you like this unit. Good luck to you!