Specific installation steps for 2012 2013 2014 Chevrolet S10 navigation system support BT pairing rearview camera

If you are a owner of 2012 2013 2014 Chevrolet S10,I think you should be someone who are interested in upgrading your car stereos.

Actually the operating system of most car stereos are same,so a new stereo may can installed in several cars.A car also has some choices.

Let’s have a look at following image first :it’s head unit after upgrade,DVD GPS navigation system of 2012 2013 2014 Chevrolet S10.

Then you can decide whether to learn specific installation steps for 2012 2013 2014 Chevrolet S10 navigation system support BT pairing rearview camera.

Head unit after upgrade,DVD GPS navigation system of 2012 2013 2014 Chevrolet S10
Head unit after upgrade,DVD GPS navigation system of 2012 2013 2014 Chevrolet S10

This unit can be installed in your car if it belongs to what is mentioned in the picture.In addition,maybe this stereo can be installed into not only one type car,what can we know whether it’s suitable?All right,you can have a careful watch at its trim panel and make a comparison between factory one and this one,if they are same then the answer is yes.

Some of you may think installing Chevrolet S10 navigation radio in your car by yourself is not possible.However it’s very possible because many car owners who are not professional have achieved this goal by himself,of course it’s under the condition that him or her has made enough preparations for it,such as searching related information and ask workers of this market to get problems solved.Next comes to Chevrolet S10 radio installation.

2012 2013 2014 Chevrolet S10 stereo removal:

1.Gently lever the upper trim housing panel from the dash with a removal tool

Gently lever the upper trim housing panel from the dash with a removal tool
Gently lever the upper trim housing panel from the dash with a removal tool

 

 

 

 

 

 

 

2.Lever edges of side panel,release and reposition the shifter

Fasten and reposition the shifter
Fasten and reposition the shifter

 

 

 

 

 

 

3.Make out 2 screws(this screw and the other corresponding one) from the storage pocket,remove car storage

Make out 2 screws
Make out 2 screws

 

 

 

 

 

 

remove car storage
remove car storage

 

 

 

 

 

 

4.Make out 4 screws which are on the accessorv control panel

Make out 4 screws which are on the accessorv control panel
Make out 4 screws which are on the accessorv control panel

 

 

 

 

 

 

 

 

Make out 4 screws which are on the accessorv control panel
Make out 4 screws which are on the accessorv control panel

 

 

 

 

 

 

 

 

5.When you remove this very tough panel you should be patient and the clips will loosen.,then let panel hang to side

remove this very tough panel
remove this very tough panel

 

 

 

 

 

6.Make out 2 screws from radio control panel,unplug the radio control panel

Make out 2 screws from radio control panel
Make out 2 screws from radio control panel

 

 

 

 

 

 

7.Take out the really strange blue clip absolutely before removing the other connector,and remove the latter one

Take out the really strange blue clip absolutely
Take out the really strange blue clip absolutely

 

 

 

 

 

 

8.Get out 2 screws which are on the radio chassis,and remove the other 2 screws which are near the top of the stereo,in order to fasten the screen

Get out 2 screws which are on the radio chassis
Get out 2 screws which are on the radio chassis

 

 

 

 

 

 

9.Make screen out by pulling,and get behind clip out

Make screen out
Make screen out

 

 

 

 

 

 

10.There are still 2 screws on stereo,remove them from car head unit

 

remove them from car head unit
remove them from car head unit

 

 

 

 

 

 

11.Take stereo and connectors out

Take stereo and connectors out
Take stereo and connectors out

 

 

 

 

 

 

2012 2013 2014 Chevrolet S10 DVD nav system installation:

12.Read installation instructions that within you new bought stereo,precisely make cables connection between new stereo with car’

13.After correct connection,install your new unit into your car and turn on it to test whether your actions are all right

13.Fix 2 screws to the stereo and install the dvd player in position

14.Make 2 screws back to the place near top of the stereo,and 2 screws to radio chassis

15.Make other parts back to original place and don’t forget to firm their screws back to them to fix corresponding machine

This is whole process for the installation,and you will succeed only if you can act as above steps carefully.

Please notice that keeping you safe is the most important,if you still account some problems that is difficult to deal with,you can ask someone who knows better for help,wish you good luck.

And you can get more information about new unit from next website: http://www.seicane.com/car-dvd-radio-player-sat-navi-system-for-chevrolet-s10-support-3g-wifi-dvr-video-recording-with-gps-radio-bluetooth-3d-map-file-management-c203-1.

 

 

2 comments on “Specific installation steps for 2012 2013 2014 Chevrolet S10 navigation system support BT pairing rearview camera

  1. You actually make it seem so easy with your presentation however I in finding this topic to be actually one thing which I believe I’d by no means understand.
    It seems too complex and extremely extensive for me. I’m having a look ahead for your subsequent put up, I’ll try to get the
    hang of it!

    • “Dear,
      This is Seicane.com.
      Thanks for interested in our product.
      Could you please send us the photo of your car’s dashboard to [email protected]?  
      And could you please tell us the model and year of your car?
      Then we can help you check if this unit can fit your car or not ,hope you could cooperate with us.
      Looking forward to hearing from you soon.
      Thank you & Best regards!

Leave a Reply

Your email address will not be published. Required fields are marked *