An easy installation guide of a 2003-2014 VW Volkswagen Transporter head unit with Mirror Link OBD2 DVD Player GPS

If you want to have a more convenient and interesting driving experience, you can choose to upgrade your factory radio with a modern multifunctional head unit. Some of you may think it will cost a lot to do it. Actually, the installation can help you save a lot from upgrading a new head unit. With a detailed installation guide, you can achieve the installation on your own at your home. The below picture is a Seicane 2003-2014 VW Volkswagen Transporter head unit after installation, if you have the same dashboard, you can follow the below step-by-step guide.

2003-2014 VW Volkswagen Transporter head unit after installation
2003-2014 VW Volkswagen Transporter head unit after installation

 

There are some tips before installation:

  1. Ensure the power cable is disconnected for safety.
  2. Make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last before connecting.

 

2003-2014 VW Volkswagen Transporter head unit installation guide

  1. Remove the original radio with the unlock tools.
2003-2014 VW Volkswagen Transporter head unit installation step 1
2003-2014 VW Volkswagen Transporter head unit installation step 1

 

  1. Disconnect the harness at the back of the factory radio.
2003-2014 VW Volkswagen Transporter head unit installation step 2
2003-2014 VW Volkswagen Transporter head unit installation step 2

 

  1. Unplug the connectors.
2003-2014 VW Volkswagen Transporter head unit installation step 3
2003-2014 VW Volkswagen Transporter head unit installation step 3

 

  1. Disconnect the car radio wiring.
2003-2014 VW Volkswagen Transporter head unit installation step 4
2003-2014 VW Volkswagen Transporter head unit installation step 4

 

  1. Remove screws behind the console.
2003-2014 VW Volkswagen Transporter head unit installation step 5
2003-2014 VW Volkswagen Transporter head unit installation step 5

 

  1. Put the harness into the new Seicane head unit as user manual shows.
  2. Put the new Seicane head unit into dash.
  3. Turn on the new Seicane head unit to check if everything works well.
  4. Install the screws and put the new Seicane head unit into the dash.

 

That’s all the instruction on how to install a 2003-2014 VW Volkswagen Transporter head unit. Wish you can get some help for your installation. If it’s the first time for you to do it, you’d better make clear everything or do it under the guidance of a professional.

 

To upgrade your factory radio, you need to pick a suitable head unit for your, so that it can be perfectly installed and work well with your car. If you haven’t found one yet, I’d like to share an intelligent VW Volkswagen Transporter head unit from Seicane to you.

 

http://www.seicane.com/seicane-s127402-quad-core-android-4-4-4-2003-2014-vw-volkswagen-transporter-radio-bluetooth-in-dash-car-navigation-system-with-3g-wifi-mirror-link-obd2-cd-dvd-player-16g-flash-rearview-camera-canbus

 

This double din DVD player GPS navigation system with Android 4.4.4 is suitable for 2003-2014 VW Volkswagen Transporter. The built-in GPS navigation system can provide you with the world real-time traffic information to help you reach your destination faster than before.

 

A large 7 inch multi-touch screen with HD 1024*600 pixel resolution makes you easier to operate the map and watch the videos. Pairing your Bluetooth-enabled with this unit for hands-free calls can enhance your safety, and you can also relax yourself by streaming music. The USB/iPod connection allows you to have more choices to have fun according to your own preference.

 

Wish you have a good time with this VW Volkswagen Transporter head unit and good luck to you!

Leave a Reply

Your email address will not be published. Required fields are marked *